AoFrio Network Pro ONE Bedienungsanleitung
® is a registered Trademark of AoFrio Ltd.
AoFrio Ltd
www.aofrio.com
INSTALLATION GUIDE
Network Pro
Installation Guide
Document #WT 9695_i2
Issue date: January 2023
1
Please read the following warnings to maintain the safe operation and continued performance of the AoFrio
Network Pro.
Warnings Important do’s and don’ts:
Installation
The Network Pro must be installed in accordance with
the instructions provided in the Network Pro Installation
Guide otherwise the warranty may be void. The Network
Pro must only be installed and congured by trained and
authorized staff.
• Only authorised staff should install the
Network Pro.
USB-C port
Do not connect anything to the USB-C port. The port is
a non-standard USB-C and is only intended to be used
by AoFrio during manufacturing. Connecting anything to
this port may damage the product and void the product
warranty.
• Do not connect anything to the USB-C port.
No serviceable parts
There are no serviceable parts inside the Network Pro.
Do not attempt to open the housing. Opening of the
electronics housing, altering, or modifying the Network Pro
will invalidate the warranty and damage the device.
• There are no serviceable parts inside the
Network Pro.
• Do not open the housing.
Fit for purpose
The Network Pro must only be used for the purposes
and functions described in this manual. While AoFrio
may provide technical support on suitable applications
and congurations of the Network Pro (where such
a relationship may exist), no liability, responsibility or
risk is accepted in determining if the Network Pro is t
for purpose for any particular application. No liability,
responsibility or risk is accepted by AoFrio for the
operational function of any particular installation
or conguration.
• The Network Pro must only be used for the
purposes described in this manual.
Continuous development
AoFrio undertakes to continuously develop and improve
products and services. The design and specication of
Network Pro and contents of this manual are subject to
change without notice. While every endeavour is made to
ensure that all specications and documents are current
and complete, AoFrio accepts no liability, responsibility, or
risk due to omissions or changes caused by continuous
improvement and design changes.
•The design and specication of the Network Pro
is subject to change and new rmware may be
released without notice.
Warnings
2
Warnings Important do’s and don’ts:
Correct disposal
The Network Pro is subject to EU Directive 2012/19/
EU (WEEE) for e-waste. It may also be subject to other
national legislation for the safe disposal of e-waste.
The Network Pro must not be disposed of in municipal
collections, it must be disposed of through an approved
WEEE collection point. Alternatively, Network Pro may be
returned to an authorised AoFrio distributor at the end of
its working life. Penalties may be applicable for incorrect
disposal, as specied by national legislation.
The device contains a lithium battery. This may be
hazardous if incinerated or physically damaged. The circuit
board may contain hazardous substances which could
affect health and the environment if disposed of incorrectly.
Once the device’s battery is depleted, remove device
from equipment and dispose of it according to local
requirements. Leaving Network Pro installed in the
equipment presents risks due the potential for battery
housing corrosion leading to chemical leakage.
• The Network Pro must not be disposed of in
municipal collections; it must be disposed of
through an approved e-waste collection point.
•Safety warning: The Network Pro devices
contain a lithium battery. This may be hazardous if
incinerated or physically damaged.
• Do not leave an old Network Pro installed in eld
equipment after it has reached its end of life.
Chemicals
The Network Pro must not be exposed to any liquids,
solvents or chemicals, as this may damage the housing
and lead to unsafe operation. Exposure to such chemicals
invalidates the warranty.
• Do not expose to liquids.
Temperature
The Network Pro must not be subjected to temperatures
outside its specied temperature limits.
Exceeding these ranges in operation, installation,
transportation, or storage, will invalidate the warranty and
may damage electronic circuits and housing components,
leading to premature failure.
• Do not expose to high or low temperatures.
Vibration and impact
The unit must be installed in such a way as to be protected
from vibration and impact during operation. Exposure
to impact and mechanical shock, either in operation,
installation, transportation, or storage, may damage
electronic circuits and housing components, leading to
premature failure, and may cause the Network Pro to
become unsafe. Damage caused by impact is not covered
by warranty.
• Do not drop or install the Network Pro in locations
with vibration.
Warnings continued
3
Introduction
The Network Pro is one of the communications devices in the AoFrio IoT system. It provides real-time automated
data acquisition from AoFrio SCS controllers, Monitors and Clicks installed in your coolers in the field, adding a
cellular connectivity option to the existing portfolio of data acquisition solutions provided by AoFrio. Connectivity over
the cellular network eliminates the need for site visits to acquire data from the asset fleet, or update the firmware on
the Network Pro.
Communications
Network Pro is equipped with 2 different types of radio connectivity:
• Bluetooth - The device is fully compatible with the AoFrio IoT system and uses Bluetooth to acquire data from
up to 16 AoFrio IoT devices.
• Cellular connectivity - Network Pro is equipped with a global cellular module that provides connectivity
using LTE Cat M1 with 2G fallback. Cellular SIMs are installed at the time of manufacture and the data plan is
managed by AoFrio unless an alternative arrangement has been made.
Battery
The device has a rechargeable internal battery that is used for backup if the external power supply is removed. The
battery life is approximately 12 hours during which time the Network Pro will continue to operate fully as though still
connected to its external power supply.
Location Reporting
Wi-Fi positioning is used to help determine the location of the Network Pro, and therefore also the coolers that
are within Bluetooth range. WiFi is not used to transfer data i.e. Network Pro is not capable of establishing a WiFi
connection.
The port is a non-standard USB-C and is only intended to be used by AoFrio during manufacturing. Connecting anything
to this port may damage the product and void the product warranty.
DO NOT USE THE USB-C PORT
4
What’s in the box?
Planning where to install your Network Pro
Network Pro can be installed as a hub to connect up to 16 AoFrio IoT devices in the point-of-sale that are
within Bluetooth range. Make the following decisions:
1. Determine the quantity and location of AoFrio IoT devices within the point-of-sale
2. Download the Field App and verify the connection
3. Decide the mounting position in accordance with the requirements in this manual
4. Identify a suitable power source for the Network Pro (maximum of 2 meters from the mounting position)
5. Mount the Network Pro device using the appropriate mounting method for your field conditions or location
Mounting position
Install Network Pro as close as possible to the coolers being tracked,
ideally not more than 5 meters away. For best results, install with clear
line of sight between Network Pro and the devices being tracked (SCS or
Monitor for example).
With clear line of sight, connections of up to 10 meters away may
be possible.
The recommended mounting location is on top and slightly back from the
front of the cooler, where it is high up for best signal quality, but out of sight
of customers.
5
LED purpose and behaviour
Network Pro is equipped with 4 LEDs, numbered 1 through 4 from left to right with behaviour as described.
NETWORK PRO
AoFrio IoT
1234
LED Purpose Behaviour
LED 1 External power status
• ON = good input voltage (between 4.6V
and 6.4V)
• OFF = no external power, or outside
allowed range
LED 2 Battery charging status
• ON = battery charging
• OFF = battery not charging
When the battery is fully charged the LED may
turn off.
LED 3 Cellular module power status • ON = cellular module on
• OFF= cellular module off
LED 4 Cellular network connectivity status
Slow short blink - searching for cellular network
Slow long blink - connected to a cellular
network, idle
Fast blink - connected to a cellular network,
sending data
Note: When running from the battery alone only LED 3 and 4 will be active.
6
Field App Verication
The Field App provides a self-test feature to verify that the Network Pro is fully
functional and the installation is complete. Access to the Network Pro feature is
controlled by Roles in the User Manager. If a user’s Role type does not include
the Network Pro permission, then they will not have access to the feature. Adding
the Network Pro permission to a Role can currently only be performed by AoFrio
Support.
Note: Network Pro features are available in version 5.24.40 or later of the Field App. Check
the Field App version from the menu within the App.
Field App can be downloaded from the Google Play or Apple App Store:
Apple Store Google Play
Step Details
1Select the Network Pro in the
Field App
Use the Barcode option and camera
on the phone to scan the QR code on
the Network Pro;
Or
Select the Network Pro from the cooler
list. Network Pro devices show
the icon
2Fix Check List items showing
The installation cannot be completed
if any Check List items are
showing a
Refer to the Troubleshooting section
for assistance if required.
Press the Refresh button to retrieve
the latest data from the AoFrio Cloud.
7
Field App Verication continued
Step Details
3Troubleshoot
Use the Network Pro Details screen if
necessary to assist with any
troubleshooting steps.
4Investigate Check List items
showing a
Items with a highlight a potential
problem. In this example 1 cooler is
detected by the Network Pro but is
out of range. In some cases, a
may be expected and may not need
to be resolved.
5The Network Pro is fully
functional if there are
marks in each of the
four Check List items.
8
Mounting your device
Note
• Metal and other obstacles between Network Pro and the devices being tracked may cause
connection reliability issues
• Installation is not recommended on the side or back of a cooler
• Do not install Network Pro inside the cooler or compressor HOT space
•If multiple coolers are being tracked, nd a central installation position in the store
• Install location must be an area where the temperature is maintained between 0°C (32°F) and 40°C
(104°F) to ensure the internal battery can be charged
• Do not install Network Pro in an area where there is a risk of condensation or liquid
Mounting Method
Once you have connected to the Field app to the Network Pro and confirmed your BLE and Network connections,
select a suitable location to mount your Network Pro that has a clear line of sight to your connected refrigeration
assets. Mount the device using either the screws or double-sided tape supplied with the product.
If mounted vertically it must be mounted with the tail facing down or to the left, to avoid any debris or moisture ingress
unplugged from the power cable.
We recommend that you take a photo of the device once installed. This can help to troubleshoot any connectivity
issues in the future.
WARNING:
Mount the Network Pro in a way that avoids moisture or debris build up in the USB-C connector.
9
Mounting continued
Pull out the screw mounting tabs from the
bottom of the device.
Mark and drill pilot holes.
Using a screwdriver, tighten the two screws to
secure the device to the surface.
Screw mount
Andere Handbücher für Network Pro ONE
2
Inhaltsverzeichnis
Andere AoFrio Netzwerk-Hardware Handbücher
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
