AOMWAY TX001 Bedienungsanleitung
Model#: TX001
Product Name: Power Switchable Transmitter
Introduction:
Now you can select transmission power, band, channel & microphone function all of them just
by simply push the button for different purpose of use. No interference to nearby channels
when power on, start transmitting only after all set as good.
Specifications:
zElectrical:
–Power Supply: DC 6-28V
–Current: 150mAh @12V (200mW)
–Power Switchable: 25mW / 200mW / 600mW (by push button)
–Output Voltage: 4.9~5.1V(for camera)
–Format: NTSC / PAL
–Port: 2p JST (Power Supply, GND)
5p JST (RightAudio, LeftAudio, Video, GND, Output Voltage)
–Channel Display: LED light
–Power Indication: LED light
–Band/Channel Selection: Push Button
–Transmitter Type: TX001A: Regular SMA; TX001B: 50mm Extension Cable
–Frequencies:
Band\Channel CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
Band A 5705MHz 5685MHz 5665MHz 5645MHz 5885MHz 5905MHz 5925MHz 5945MHz
Band B 5733MHz 5752MHz 5771MHz 5790MHz 5809MHz 5828MHz 5847MHz 5866MHz
Band C 5725MHz 5745MHz 5765MHz 5785MHz 5805MHz 5825MHz 5845MHz 5865MHz
Band D 5740MHz 5760MHz 5780MHz 5800MHz 5820MHz 5840MHz 5860MHz 5880MHz
Band E
(RaceBand) 5658MHz 5695MHz 5732MHz 5769MHz 5806MHz 5843MHz 5880MHz 5917MHz
zAudio:
–Microphone: Available
zMechanical:
–Dimensions: 29*25*10mm
–Transmitter Weight: TX001A:11g;TX001B:12g
–Accessories: 1 X Power Cable, 1 X AV Cable, 1 X 5db OmniAntenna
zOperation:
–LED Array 1: Power Indicator (All Red)
a) ‘Tx’ light on: power supply indication and transmission power output 25mw
b) ‘200’ light on:: transmission power output 200mw
c) ‘600’ light on:: transmission power output 600mw
–LED Array 2: Band Indicator(All Blue)
a) ‘A/B/C/D/E’ light on: respectively indicate current band is set on BandA/B/C/D/E
–LED Array 3: Channel Indicator(All Green)
a) ‘1~8’ light on: respectively indicate current channel is set on Channel 1~8
.
–Button 4: Transmission Power Control
a) When turn on power, auto load last time channel/power settings but no
transmission, meanwhile ‘Tx’ light is on but stays low, user can change channel.
Short press button 4 twice to start transmitting.
b) Each time long press Button 4 (3s long) to change transmission power, ‘Tx’ light
solid on indicating output at 25mW, ‘200’ light solid on indicating output at 200mW,
‘600’ light solid on indicating output at 600mW.
c) Short press Button 4 twice to stop transmitting; ‘Tx’ light stays low.
–Button 5: Band/Channel Selection
a) Each time long press Button 5(3s long), band switch betweenA/B/C/D/E.
b) Each time short press Button 5, channel switch between CH1~8.
c) there is a blue LED nearby the microphone, Long press Button 5(5s long), light
on indicating the microphone turns on and light off indicating the microphone turns
off.
–Output Power Memory Function
a) First time turns on, default no transmission and ‘Tx’ light stays low.
b) Auto record transmission status when power off, next time power on, remain the
same transmission settings (on or off) as last time.
Inhaltsverzeichnis
Andere AOMWAY Sender Handbücher
Beliebte Sender Handbücher anderer Marken
Dejero
Dejero EnGo 3x Bedienungsanleitung
Rosemount
Rosemount 4600 Bedienungsanleitung
Speaka Professional
Speaka Professional 2342740 Bedienungsanleitung
trubomat
trubomat GAB 1000 Bedienungsanleitung
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Bedienungsanleitung
Rondish
Rondish UT-11 Bedienungsanleitung
