AOpen AX4T II-133 Bedienungsanleitung

MIC-In

Line-In

Speaker Out

PS/2 Mouse

Connecto

PS/2 Keyboard

Connecto

USB Port

SPP/EPP/ECP Parallel Port

COM 1 Port COM 2 Port

MIDI/Game Port

RJ45 10/100

LAN Jack

CD-IN Connecto

AUX Fan Connecto

Front Panel Audio Connecto

MODEM-IN Connecto

WOM Connecto

CNR Expansion Slot

IrDA Connecto

JP17 Enable/Disable Onboard LAN

AGP Pro External Power Connecto

Dr. LED Connector (Upgrade Optional)

Front Panel Connecto

Chassis Fan Connector

FDD Connecto

JP15 & JP16 USB2/CNR

Select Jumpe

Supports 2nd USB Connecto

JP14 CMOS Clear Jumpe

JP9 FSB Select Jumpe

4Mbit Programmable Flash ROM

Extra Power Connector for 5V & 3.3V

Resettale Fuse

423-pin CPU socket with Voltage and

Frequency Auto-detection that supports

Intel®Pentium®4 1.30~1.50GHz+ CPU

GP 4x/Pro Expansion Slot

32-bit PCI Expansion Slot x5

CPU Fan Connector (2-pin w/o H/W

Monitoring Function)

184-pin RIMM Socket x4 supports

PC-600/800 RDRAM maximum up to

2GB

Intel®850 chipset with MCH, ICH2

and FWH that supports LAN, Ultra

TA/100, RDRAM Solution

Low ESR Capacitors

24-pin ATX Power Connector

ATA/33/66/100 IDE Connector x2

1. JP14 Clear CMOS

2. Enable/Disable Onboard LAN

Everything you need to boot this

motherboard is included in this

Easy Installation Guide. For more

information, a complete Online

User's Manual can be found in the

Bonus Pack CD Disc. Thanks for

the help of saving our earth.

PART NO: 49.89F01.004 DOC. NO: AX4T-EG-E0105B

Motherboard x1

40-wire IDE Cable x1

Floppy Disk Drive Cable x1

80-wire IDE Cable x1

Chassis I/O Bracket x1

RIMM Terminator (C-RIMM) x2

Bonus Pack CD Disk x1

NORTON AntiVirus CD x1

AX4T EIG x1

The CNR interface provides four solutions for users: audio, modem, LAN and Home LAN. Hence, if you

desire to use the LAN solution of CNR, you should power off system and short pin 1 & pin 2 of JP17 by

umper cap, then run BIOS setup program > Integrated Peripherals > Onboard/CNR LAN Selection to

disable the onboard LAN EPROM.

You can clear CMOS to restore system default setting. To

clear the CMOS, follow the procedure below.

1. Turn off the system and unplug the AC power.

2. Remove ATX power cable from connector PWR2.

3. Locate JP14 and short pins 2-3 for a few seconds.

4. Return JP14 to its normal setting by shorting pins 1 & pin2.

5. Connect ATX power cable back to connector PWR2.

Tip: When should I Clear CMOS?

1. Boot fail because of overclocking…

2. Forget password…

3. Troubleshootin

…

Normal Operation

(Default)

Clear CMOS

Pin 1

Enable

(Default) Disable

1. Pull up the CPU socket lever and up

to 90-degree angle.

2. Locate Pin 1 on the socket and look

for a (golden) cut edge on the CPU

upper interface. Match Pin 1 and cut

edge. Then insert the CPU into the

socket.

3. Press down the CPU socket lever to

finish CPU installation.

Plug in the CPU fan cable to the 3-pin CPU FAN (FN2 or FAN1 w/o H/W monitoring)

connector. If you have chassis fan, you can also plug it on FN3 or FN4 (without H/W

monitoring) connector.

This jumper allows you to select CPU FSB frequency manually. If you are not an

overclocker, we recommend you keep the jumper setting for default.

CPU Ratio 8x, 9x, 10x… 21x, 22x, 23x

CPU CPU Core

Frequency FSB Clock System

Bus Ratio

Pentium 4

1.30G 1300MHz 100MHz 400MHz 13x

Pentium 4

1.40G 1400MHz 100MHz 400MHz 14x

Pentium 4

1.50G 1500MHz 100MHz 400MHz 15x

5. Setting CPU Voltage & Frequency

Note: If you do not match the CPU

socket Pin 1 and CPU cut edge well,

you may damage the CPU.

CPU socket lever Setting CPU Core Voltage

This motherboard supports CPU VID function. The CPU core voltage will be automaticall

detected.

Setting CPU Frequency

This motherboard is CPU jumper-less design, you can set CPU frequency through the

BIOS setup, and no jumpers or switches are needed.

BIOS Setup > Frequency / Voltage Control > CPU Speed Setup

Core Frequency = CPU FSB Clock * CPU Ratio

4. Installing CPU & Housing Fan

Note: Some CPU fans do not have

sensor pin so they cannot support fan

monitoring.

CPU Fan Connector

Chassis Fan Connector

AUX Fan Connector

GND SENSOR

+12V

SENSOR

+12V

GND

SENSOR +12V

GND

+12V

6. JP9 Adjust FSB Frequency

Warning: Intel

®850 chipset

supports maximum 400MHz

(100MHz*4) system bus and

66MHz AGP clock; higher

clock setting may cause

serious system damage.

3. Installing CPU

CPU Pin 1 and cut edge

Pin 1

FSB=100MHz

(Default)

FSB=133MHz

1 1

Primary

Slave (2nd)

Secondary

Master (3rd)

Secondary

Slave (4th)

Primary

Master (1st)

Pin 1

8. Connecting IDE & Floppy Disk Cables

7. Install RIMM Modules 9. Connecting Front Panel Connector

10. Connecting ATX Power Connector

This motherboard has four 184-pin RIMM sockets that allow you to install PC600,

PC700 and PC800 RDRAM up to 2GB. AX4T will detect the RDRAM speed

automatically while system is in the process of POST, but it still allows you to select the

RDRAM type manually by BIOS setup program.

Connect 34-pin floppy cable and 40-pin IDE cable to floppy connector FDC and IDE

connector. Be careful of the pin1 orientation. Wrong orientation may cause system

damage.

Speaker

IDE LED

SPWR

CPI & PWR

LED

Reset

SPWR

GND

ACPI & PWR LED

GND

+5V

GND

RESET

GND

IDE LED

GND

SPEAKE

ttach the power LED, Keylock, speaker, and reset switch

connectors to the corresponding pins. If you enable

“Suspend Mode” item in BIOS Setup, the ACPI & Power

LED will keep flashing while the system is in suspend mode.

Locate the power switch cable from your ATX housing. It is

a 2-pin female connector from the housing front panel. Plug

this connector to the soft-power switch connector marked

SPWR.

FDD Connector

ATA 33/66/100

IDE Connector

RIMM1

RIMM2

RIMM3

RIMM4

Note: Based on Intel 850 chipset

specification, the AX4T has dual

memory channels. Therefore, you

must use two RIMMs on the RIMM1

& RIMM2/RIMM3 & RIMM4 sockets

at least.

IDE2 (Secondary)

Pin 1

IDE1 (Primary)

This motherboard uses 24-pin Pentium 4 standard ATX power connector and comes with

an extra power connector for 5V/3.3V as shown below. Please make sure you plug in the

right direction.

COM

PS-ON

-12V

+3.3V

+5V

+3.3V

PWR-OK

-5V

+12V

GND

+12V

VCC

VCC3 GND

This motherboard provides 4 USB connectors to connect USB devices such as mouse,

keyboard, modem and printer. There are two connectors on the PC99 back panel. You

can use proper cable to connect other USB connectors to the back panel or front panel

of chassis.

13. Connecting CD / MODEM Connector

14. Connecting Front Panel Audio Connector

11. Connecting 2nd USB Port

12. Connecting IrDA Connector

The IrDA connector can be configured to support wireless infrared module. With this

module and application software such as Laplink or Windows 95 Direct Cable

Connection, the user can transfer files to or from laptops, notebooks, PDA devices and

printers. This connector supports HPSIR (115.2Kbps, 2 meters) and ASK-IR (56Kbps).

Install the infrared module onto the IrDA connector and enable the infrared function

from BIOS Setup, and then select UART mode. Make sure to have the correct

orientation when you plug in the IrDA connector.

If the housing has been designed with an audio port on the front panel, you’ll be able to

connect onboard audio to front panel through this connector.

The CD-IN connector is used to connect CD Audio

cable from CDROM or DVD drive to onboard sound.

The MODEM-IN connector is used to connect Mono

In/ Mic Out cable from internal modem card to

onboard sound circuit.

MODEM-IN (Green)

Connector Pin1 Pin2 Pin3 Pin4

CD-IN Left GND GND Right

MODEM-IN Mono In GND GND Mic Out

CD-IN (Black)

IRTX

GND

IRRX

+5V

AUDIO1 Connector

FP_MIC

PHONE_R

PHONE_L

GND

fter you finish the setting of jumpers and connect correct cables. Power on

and enter the BIOS Setup, press <Del> during POST (Power On Self Test).

Choose "Load Setup Defaults" for recommended optimal performance.

15. Power-on and Load BIOS Setup

16. AOpen Bonus Pack CD 18. BIOS Upgrade

Open Easy Flash is very user-friendly. The BIOS binary file and flash routine are

combined together and you simply run a single file to complete the flash process.

1. Download new BIOS upgrade zipped file from AOpen's web site. For example,

AX4T102.ZIP.

2. Run shareware PKUNZIP (http://www.pkware.com) which supports

miscellaneous operation systems to extract the binary BIOS file and the flash

utility. Or Winzip (http://www.winzip.com/) in Windows environment.

3. Save the unzipped file into a bootable floppy disk.

For example, AX4T102.BIN & AX4T102.EXE

4. Reboot the system to DOS mode without loading any memory handler (such as

EMM386) or device driver. It needs around 520K free memory space.

5. Execute A:> AX4T102 and the program will do the rest of it.

DO NOT turn off the power during FLASH PROCESS until you are asked to!!

6. Reboot system and press <Del> to enter BIOS Setup, Choose "Load Setup

Defaults", then “Save & Exit Setup” and finish the BIOS upgrade.

Warning: The upgrade of new BIOS will permanently replace your original BIOS

content after flashing. The original BIOS setting and Win95/Win98 PnP information

will be refreshed and you probably need to re-configure your system.

17. Eliminating “?” Mark from Windows

You can install the autorun menu of Bonus CD disc. Choose the utility and driver and

select model name.

Del

Warning: Please avoid of using "Load

Turbo Defaults", unless you are sure

our system components (CPU, DRAM,

HDD, etc.) are good enough for turbo

setting.

Windows 95/98/ME/2000 cannot recognize this chipset, because it was released before

the Intel 850 chipset. You can install the Intel INF Update Utility from the Bonus Pack CD

disc auto-run menu to eliminate the “?” marks.

If you encounter any trouble to boot you system, follow the procedures

accordingly to resolve the problem.

Part Number and Serial Number

The Part Number and Serial number are printed on bar code label. You can find this

bar code label on the outside packing, ISA/CPU slot or on component side of PCB. Fo

example:

Model name and BIOS version

AX4T R1.00 Feb. 20. 2001 AOpen Inc.

ward Plug and Play BIOS Extension v1.0A

Model name and BIOS version can be found on upper left corner of first boot screen

(POST screen). For example:

P/N: 91.88110.201 is part number, S/N: 91949378KN73is serial number.

AX4T is model name of motherboard; R1.00 is BIOS version

Make sure if the jumper settings for CPU and DRAMs are correct.

Clear CMOS.

Install the VGA card. Then connect your monitor and keyboard.

The problem was probably caused

by power supply or motherboard

failure. Please contact your reselle

or local distributor for repairing.

Perhaps your VGA card or monito

is defective.

Yes

It is very possible that your keyboard

is defective.

During system rebooting, press Del to enter BIOS Setup. Choose

“Load Setup Default".

The problem should be caused by the

IDE cables or HDD itself.

Re-install Windows 95, Windows 98 or Windows NT.

Yes

Turn off the power and unplug the AC power cable, then remove all

of the addon cards and cables, including VGA, IDE, FDD, COM1,

COM2 and Printer.

Turn on the power, and check if

the power supply and CPU fan

work properly.

Start

Check if there is display.

Press Ctrl, and Alt key at the

same time, hold them and then

press Del to see if the

stem reboots.

Turn off the system and

re-connect the IDE cable.

Check if the system can

reboot successfully.

End

Part No. Serial No.

Dear Customer,

Thanks for choosing AOpen products. To provide the best and fastest service to

our customer is our first priority. However, we receive numerous emails and

hone-calls worldwide everyday, it is very hard for us to serve everyone on time.

We recommend you follow the procedures below and seek help before contact

us. With your help, we can then continue to provide the best quality service to

more customers.

Thanks very much for your understanding!

Open Technical Supporting Team

Online Manual: Please check the manual carefully and make sure the

jumper settings and installation procedure are correct.

http://www.aopen.com.tw/tech/download/manual/default.htm

Test Report: We recommend to choose board/card/device from the

compatibility test reports for assembling your PC.

http://www.aopen.com.tw/tech/report/default.htm

FAQ: The latest FAQ (Frequently Asked Questions) may contain a

solution to your problem.

http://www.aopen.com.tw/tech/faq/default.htm

Download Software: Check out this table to get the latest updated

BIOS/utility and drivers.

http://www.aopen.com.tw/tech/download/default.htm

News Group: Your problem probably had been answered by our support

engineer or professional users on the news group.

http://www.aopen.com.tw/tech/newsgrp/default.htm

Contact Distributors/Resellers: We sell our products through resellers

and integrators. They should know your system configuration very well and

should be able to solve your problem more efficien n important reference for

you if next time you want to buy something else from them.

before contacting us. The part number, serial number and BIOS version

are also very helpful.

Web Site: www.aopen.com

E-mail: Send us email by going through the contact form below.

English http://www.aopen.com.tw/tech/contact/techusa.htm

Japanese http://aojp.aopen.com.tw/tech/contact/techjp.htm

Chinese http://w3.aopen.com.tw/tech/contact/techtw.htm

German http://www.aopencom.de/tech/contact/techde.htm

French http://aofr.aopen.com.tw/tech/contact/techfr.htm

Simplified Chinese http://www.aopen.com.cn/tech/contact/techcn.htm

Pacific Rim

Open Inc.

Tel: 886-2-2696-1333

Fax: 886-2-8691-2233

merica

Open America Inc.

Tel: 1-510-498-8928

Fax: 1-408-922-2935, 1-408-432-0496

Europe

Open Computer b.v.

Tel: 31-73-645-9516

Fax: 31-73-645-9604

Germany

Open Computer GmbH.

Tel: 49-2102-157700

Fax: 49-2102-157799

China

艾尔鹏国际上海(股)

有限公司

Tel: 49-2102-157700

Fax: 49-2102-157799

Andere Handbücher für AX4T II-133

Inhaltsverzeichnis

Andere AOpen Hauptplatine Handbücher

AOpen

AOpen AX34 Pro II Bedienungsanleitung

AOpen

AOpen DX37PU-OL-E0112B Bedienungsanleitung

AOpen

AOpen AX3S-U Bedienungsanleitung

AOpen

AOpen MX33 Bedienungsanleitung

AOpen

AOpen MX46U2-GN Bedienungsanleitung

AOpen

AOpen s661FXm-7S Datenblatt

AOpen

AOpen AX4B-133 Datenblatt

AOpen

AOpen s661FXm-7S Bedienungsanleitung

AOpen

AOpen DX2G Plus Bedienungsanleitung

AOpen

AOpen n250a Bedienungsanleitung

AOpen

AOpen AK77-600GN Datenblatt

AOpen

AOpen MX4SG-4DL Datenblatt

AOpen

AOpen MK77 Bedienungsanleitung

AOpen

AOpen MX46 U2 Einrichtungshandbuch

AOpen

AOpen AP43 Bedienungsanleitung

AOpen

AOpen AX4BS Pro Datenblatt

AOpen

AOpen AX45 PRO-533 Datenblatt

AOpen

AOpen AX4B-533 Tube Bedienungsanleitung

AOpen

AOpen AX4GR Einrichtungshandbuch

AOpen

AOpen MX4L Einrichtungshandbuch

AOpen

AOpen MoDT i965GMt-LA Gebrauchsanweisung

AOpen

AOpen AX45-8X Max Einrichtungshandbuch

AOpen

AOpen AX4SG WLAN Einrichtungshandbuch

AOpen

AOpen MX46U2-VN Datenblatt

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung