AOpen AX6B Plus Bedienungsanleitung

AX6B PLUS

User's Guide

Printed in Taiwan

PART NO.: 49.87826.001

DOC. NO.: AX6BP-1-E98010C

AX6B Plus

Mainboard

User's Guide

Document Number : AX6BP-1-E98010C

Model and revision : For AX6B Plus rev 1.xx

Manual version : English, rev C

Release Date : Oct 29, 1998

More help for latest information:

Taiwan http://www.aopen.com.tw

USA http://www.aopen-usa.com

http://www.aopenusa.om

http://www.aopenamerica.com

Europe http://www.aopen.nl

publication may be reproduced, transmitted, transcribed, stored in a retrieval

system, or translated into any language or computer language, in any form or

by any means, electronic, mechanical, magnetic, optical, manual or otherwise,

without the prior written permission of this company.

iii

Disclaimer

This company makes no representations or warranties, either expressed or

implied, with respect to the contents hereof and specifically disclaims any

warranties, merchantability or fitness for any particular purpose. Any software

described in this manual is sold or licensed "as is". Should the programs prove

defective following their purchase, the buyer (and not this company, its

distributor, or its dealer) assumes the entire cost of all necessary servicing,

repair, and any incidental or consequential damages resulting from any defect

in the software. Further, this company reserves the right to revise this

publication and to make changes from time to time in the contents hereof

without obligation to notify any person of such revision or changes.

Intel and Pentium are registered trademarks of Intel Corporation.

XT/AT is a registered trademark of International Business Machines Corporation.

AMI is a registered trademark of American Megatrends Inc.

AWARD is a registered trademark of Award Software Inc.

Sound Blaster is a registered trademark of Creative Technology Ltd in the United States

and certain other countries.

Sound Blaster-LINK and SB-LINK are trademarks of Creative Technology Ltd.

Other brand and product names are trademarks and/or registered trademarks of their

respective holders.

FCC Class B Radio Frequency

Declaration of Conformity

This equipment has been tested and found to comply with the limits for a Class B

Subassembly -CPU Board device, pursuant to Part 15 of FCC Rules. Operation is

subject to the following two conditions: 1. This device may not cause harmful

interference, and 2. This device must accept any interference received, including

interference that may cause undesired operation.

Equipment Classification : FCC Class B Subassembly - CPU Board

Type of Product : Intel Pentium II Micro ATX Motherboard

Chipset(s) : Intel 82440BX

AX6B Plus

Test To Comply

With FCC Standards

FOR HOME OR OFFICE USE

The limits of FCC Part 15 Class B are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

4. Consult the dealer or an experienced radio/television technician for help.

Notice 1:

The changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

Notice 2:

Shielded interface cables, if any, must be used in order to comply with emission limits.

Organization

Chapter 1, Overview, covers the introduction and specifications of the system

board and special features.

Chapter 2, Hardware Installation, describes hardware jumpers, connectors and

memory configuration. There are user friendly drawings to locate jumper and

connector.

Chapter 3, AWARD BIOS, explains the system BIOS and tells how to configure

the system by setting the BIOS parameters.

Appendix A, Frequently Asked Question, collects most frequently asked

question of this product.

Appendix B, Troubleshooting Guide, includes first aid information you need if

you meet trouble, the WWW address and worldwide service telephone/fax are

also included.

Appendix C, Jumper Table Summary, gives you a tabular summary of the

jumper settings discussed in Chapter 2.

Conventions

The following conventions are used in this manual:

Text entered by user,

default settings,

recommended selections

Represent text input by the user, default

settings and recommended selections

<Enter>, <Tab>,<Ctl>, <Alt>,

<Ins>, <Del>, etc Represent the actual keys that you

have to press on the keyboard.

Note:

Gives bits and pieces of additional

information related to the current topic.

Warning:

Alerts you to any damage that might

result from doing or not doing specific

actions.

Caution:

Suggests precautionary measures to

avoid potential hardware or software

problems.

Important:

Reminds you to take specific action

relevant to the accomplishment of the

procedure at hand.

Tip:

Tells how to accomplish a procedure

with minimum steps through little

shortcuts.

vii

Contents

Chapter 1 Overview

1.1 Specifications..................................................................4

1.2 Suspend to Hard Drive...................................................6

1.3 Zero Voltage Modem Wake Up ......................................9

1.4 System Voltage Monitoring..........................................11

1.5 Fan Monitoring..............................................................11

1.6 CPU Thermal Protection ..............................................12

1.7 Multi-language BIOS.....................................................12

1.8 Battery-less Design ......................................................13

1.9 Sound Blaster Link .......................................................13

chapter 2 Hardware Installation

2.1 Jumper and Connector Locations ................................2

2.2 Jumpers...........................................................................4

2.2.1 Selecting the CPU Frequency ..................................4

2.2.2 Setting the CPU Voltage...........................................5

2.2.3 Clearing the CMOS...................................................5

2.2.4 AGP Ratio.................................................................6

2.3 Connectors......................................................................7

2.3.1 Power Cable .............................................................7

2.3.2 ATX Soft-Power Switch Connector...........................7

2.3.3 Fan 8

2.3.4 PS/2 Mouse ..............................................................8

2.3.5 Keyboard...................................................................9

2.3.6 Serial Devices (COM1/COM2)..................................9

2.3.7 Printer .....................................................................10

2.3.8 USB Device.............................................................10

2.3.9 Floppy Drive............................................................11

2.3.10 IDE Hard Disk and CD ROM ................................11

viii

2.3.11 SCSI Devices........................................................12

2.3.12 Hard Disk LED......................................................13

2.3.13 SB-LINK................................................................13

2.3.14 Panel Connector...................................................14

2.3.15 IrDA Connector.....................................................15

2.3.16 Modem Wake-up Connector.................................16

2.3.17 LAN Wake-up Connector......................................16

2.4 Configuring the System Memory.................................17

chapter 3 Award BIOS

3.1 Entering the Award BIOS Setup Menu .........................2

3.2 Standard CMOS Setup....................................................3

3.3 BIOS Features Setup......................................................6

3.4 Chipset Features Setup................................................11

3.5 Power Management Setup...........................................16

3.6 PNP/PCI Configuration Setup......................................23

3.7 Load Setup Defaults.....................................................28

3.8 Load Turbo Defaults.....................................................28

3.9 Integrated Peripherals..................................................29

3.10 Password Setting........................................................34

3.11 IDE HDD Auto Detection ............................................34

3.12 Save & Exit Setup .......................................................34

3.13 Load EEPROM Default ...............................................35

3.14 Save EEPROM Default................................................35

3.15 Exit without Saving.....................................................35

3.16 BIOS Flash Utility........................................................36

Appendix A Frequently Asked Question

Appendix B Troubleshooting

Appendix C Jumper Table Summary

Inhaltsverzeichnis

Andere AOpen Hauptplatine Handbücher

AOpen

AOpen AX45H-8X Max Datenblatt

AOpen

AOpen AX4SPE Max II Datenblatt

AOpen

AOpen AX45F-8X MAX Einrichtungshandbuch

AOpen

AOpen MX4GR Datenblatt

AOpen

AOpen AX3S-1394 Datenblatt

AOpen

AOpen AK77-400N Einrichtungshandbuch

AOpen

AOpen 1AK79G-V Einrichtungshandbuch

AOpen

AOpen AX45-8X Max Einrichtungshandbuch

AOpen

AOpen i945Ga-PLF Datenblatt

AOpen

AOpen AX4C-G Einrichtungshandbuch

AOpen

AOpen AP53 Bedienungsanleitung

AOpen

AOpen MK33 Einrichtungshandbuch

AOpen

AOpen MoDT i965GMt-LA Gebrauchsanweisung

AOpen

AOpen AX3SP Pro-U Datenblatt

AOpen

AOpen AK77-8XMAX Bedienungsanleitung

AOpen

AOpen AK79G MAX Datenblatt

AOpen

AOpen AP5VM Bedienungsanleitung

AOpen

AOpen n250a Bedienungsanleitung

AOpen

AOpen AX4PER Einrichtungshandbuch

AOpen

AOpen i945GTm-VHL Datenblatt

AOpen

AOpen MX4G Einrichtungshandbuch

AOpen

AOpen AK77 PLUS Bedienungsanleitung

AOpen

AOpen MODT Flex i945GTt-VFA Datenblatt

AOpen

AOpen AP5TC Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung