AOpen MX3W-V Bedienungsanleitung

MX3W-V

User's Guide

Printed in Taiwan

PART NO.:

DOC. NO.: MX3WV-1-E9910A

AWARD BIOS

MX3W-V

Motherboard

User's Guide

Document Number : MX3WV-1-E9910A

Model and revision : For MX3W-V rev 1.xx

Manual version : English, rev A

Release Date : Oct. 8, 1999

More help for latest information:

Taiwan http://www.aopen.com.tw

USA http://www.aopenusa.com

Europe http://www.aopen.nl

AWARD BIOS

publication may be reproduced, transmitted, transcribed, stored in a retrieval

system, or translated into any language or computer language, in any form or

by any means, electronic, mechanical, magnetic, optical, manual or

otherwise, without the prior written permission of this company.

AWARD BIOS

iii

Disclaimer

This company makes no representations or warranties, either expressed or

implied, with respect to the contents hereof and specifically disclaims any

warranties, merchantability or fitness for any particular purpose. Any software

described in this manual is sold or licensed "as is". Should the programs

prove defective following their purchase, the buyer (and not this company, its

distributor, or its dealer) assumes the entire cost of all necessary servicing,

repair, and any incidental or consequential damages resulting from any defect

in the software. Further, this company reserves the right to revise this

publication and to make changes from time to time in the contents hereof

without obligation to notify any person of such revision or changes.

Intel and Pentium are registered trademarks of Intel Corporation.

XT/AT is a registered trademark of International Business Machines Corporation.

AMI is a registered trademark of American Megatrends Inc.

AWARD is a registered trademark of Award Software Inc.

Other brand and product names are trademarks and/or registered trademarks of their

respective holders.

AWARD BIOS

FCC Class B Radio Frequency

Declaration of Conformity

This equipment has been tested and found to comply with the limits for a Class B

Subassembly -CPU Board device, pursuant to Part 15 of FCC Rules. Operation is subject

to the following two conditions: 1. This device may not cause harmful interference, and 2.

This device must accept any interference received, including interference that may cause

undesired operation.

Equipment Classification : FCC Class B Subassembly -CPU Board

Type of Product : Intel Celeron PPGA Micro ATX Motherboard

Chipset(s) : Intel 82440LX

MX3L

Test To Comply

With FCC Standards

FOR HOME OR OFFICE USE

The limits of FCC Part 15 Class B are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

4. Consult the dealer or an experienced radio/television technician for help.

Notice 1:

The changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

Notice 2:

Shielded interface cables, if any, must be used in order to comply with emission limits.

AWARD BIOS

Organization

Chapter 1, Overview, covers the introduction and specifications of the system

board and special features.

Chapter 2, Hardware Installation, describes hardware jumpers, connectors and

memory configuration. There are user friendly drawings to locate jumper and

connector.

Chapter 3, AWARD BIOS, explains the system BIOS and tells how to configure

the system by setting the BIOS parameters.

AWARD BIOS

Conventions

The following conventions are used in this manual:

Text entered by user,

default settings,

recommended selections

Represent text input by the user,

default settings and recommended

selections

<Enter>, <Tab>,<Ctl>, <Alt>,

<Ins>, <Del>, etc Represent the actual keys that you

have to press on the keyboard.

Note:

Gives bits and pieces of additional

information related to the current topic.

Warning:

Alerts you to any damage that might

result from doing or not doing specific

actions.

Caution:

Suggests precautionary measures to

avoid potential hardware or software

problems.

Important:

Reminds you to take specific action

relevant to the accomplishment of the

procedure at hand.

Tip:

Tells how to accomplish a procedure

with minimum steps through little

shortcuts.

AWARD BIOS

vii

Contents

chapter 1 overview

1.1 Specifications...............................................................4

1.2 APM Suspend to Hard Drive........................................5

1.3 Zero Voltage Wake On Modem....................................8

1.4 System Voltage Monitoring .......................................10

1.5 Fan Monitoring...........................................................10

1.6 CPU Thermal Protection............................................11

1.7 Battery-less Design....................................................11

chapter 2 Hardware Installation..................................... 1

2.1 Jumper and Connector Locations...............................2

2.2 Jumpers........................................................................4

2.2.1 Selecting the CPU Frequency.................................4

2.2.2 Setting the CPU Voltage.........................................5

2.2.3 Clearing the CMOS ................................................5

2.2.4 Onboard Audio .......................................................6

2.2.5 KB/MS Wakeup......................................................6

2.3 Connectors...................................................................7

2.3.1 Power Cable...........................................................7

2.3.3 Fan………..............................................................7

2.3.4 PS/2 Mouse............................................................8

2.3.5 Keyboard................................................................8

2.3.6 Serial Devices (COM1/COM2)................................8

2.3.7 Printer….................................................................9

2.3.8 USB Device............................................................9

2.3.9 Floppy Drive.........................................................10

2.3.10 IDE Hard Disk and CD ROM..............................10

AWARD BIOS

viii

2.3.11 Panel Connector.................................................11

2.3.12 IrDA Connector...................................................12

2.3.13 Wake On Modem Connector ..............................13

2.3.14 Wake On LAN Connector ...................................13

2.3.15 CD Audio Connector...........................................14

2.3.16 Mono In/Mic Out Connector................................14

2.4 Configuring the System Memory...............................15

2.5 Onboard Audio...........................................................18

2.5.1 Setting Up in Windows 95/98................................20

2.5.2 Setting Up in NT4.0..............................................21

chapter 3 Award BIOS .................................................... 1

3.1 Entering the Award BIOS Setup Menu........................2

3.2 Standard CMOS Setup.................................................3

3.3 BIOS Features Setup....................................................6

3.4 Chipset Features Setup .............................................10

3.5 Power Management Setup.........................................18

3.6 PNP/PCI Configuration Setup....................................25

3.7 Load Setup Defaults...................................................30

3.8 Load Turbo Defaults ..................................................30

3.9 Integrated Peripherals................................................31

3.10 Password Setting.....................................................38

3.11 IDE HDD Auto Detection ..........................................38

3.12 Save & Exit Setup.....................................................38

3.13 Load EEPROM Default.............................................39

3.14 Save EEPROM Default .............................................39

3.15 Exit without Saving..................................................39

3.16 NCR SCSI BIOS and Drivers....................................39

3.17 BIOS Flash Utility.....................................................40

AWARD BIOS

1-1

Chapter 1

Overview

MX3W-V is a new generation Socket 370 based system board that utilizes

Intel 810 AGPset on Micro ATX PCI/ISA platform. This AGPset is designed

for Celeron PPGA CPU, and supports new architectures such as high speed

AGP graphic port, PC100 SDRAM, AMR slot, Ultra DMA 33/66, Bus master

IDE, PCI 2.2 and USB port. It has two Dual in-line Memory Module (DIMM)

slots that allow to install PC100 SDRAMs and expand up to a maximum of

512MB. Also, MX3W-V uses 4M bit Flash ROM BIOS to reserve for future

new functions.

In addition to the above features, MX3W-V also implements many special

features as follows.

Jumper-less Design Celeron PPGA VID signal and SMbus clock generator

provide CPU voltage auto-detection and allows the user to set the CPU

frequency through the CMOS setup, therefore no jumpers or switches are

used. The correct CPU information is saved into the EEPROM. With these

technologies, the disadvantages of the Pentium based jumper-less designs

are eliminated. There will be no worry of wrong CPU voltage detection and no

need to re-open the housing in case of CMOS battery loss. The only jumper

left is to clear the CMOS, which is a safety hook if you forget the password.

Battery-less This motherboard implements EEPROM and a special circuit

(patent applied) that allows you to save your current CPU and CMOS Setup

configurations without the need of a battery. The RTC (real time clock) can

also keep running as long as the power cord is plugged. If you lose your

CMOS data by accident, you can just reload the CMOS configurations from

EEPROM and the system will recover as usual.

ACPI Suspend to DRAM You can resume your original work directly from

DRAM without going through the Win98 booting process and run your

application again. Suspend to DRAM saves your current work into the system

memory.

Inhaltsverzeichnis

Andere AOpen Hauptplatine Handbücher

AOpen

AOpen MX33 Datenblatt

AOpen

AOpen MX4BR-533 Einrichtungshandbuch

AOpen

AOpen I865Gm-7L/7N Bedienungsanleitung

AOpen

AOpen AX4SP-G Datenblatt

AOpen

AOpen AX4B-133 Datenblatt

AOpen

AOpen AX4B-533 Tube Bedienungsanleitung

AOpen

AOpen AK73 Series Einrichtungshandbuch

AOpen

AOpen AX6L Bedienungsanleitung

AOpen

AOpen AK86-L Datenblatt

AOpen

AOpen AK77-400N Einrichtungshandbuch

AOpen

AOpen i945GTm-VHL Bedienungsanleitung

AOpen

AOpen AK73 Series Einrichtungshandbuch

AOpen

AOpen AX4T II-133 Einrichtungshandbuch

AOpen

AOpen AX34 Pro II Einrichtungshandbuch

AOpen

AOpen MX59 Pro Bedienungsanleitung

AOpen

AOpen i915Ga-PLF Bedienungsanleitung

AOpen

AOpen MX4B Datenblatt

AOpen

AOpen AK79G-V Datenblatt

AOpen

AOpen MX36LE-UI Einrichtungshandbuch

AOpen

AOpen AX4T 2-533 Datenblatt

AOpen

AOpen AX4SG WLAN Einrichtungshandbuch

AOpen

AOpen i855GMEm-LFS Bedienungsanleitung

AOpen

AOpen AX4B-G2 Bedienungsanleitung

AOpen

AOpen AK72 Einrichtungshandbuch

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung