AOpen AX6BC PROII Bedienungsanleitung

AX6BC

User's Guide

Printed in Taiwan

PART NO.: 49.87822.081

DOC. NO.: AX6BC-1-E9904E

AX6BC

Mainboard

User's Guide

Document Number : AX6BC-1-E9811D

Model and revision : For AX6BC rev 1.xx

Manual version : English, rev D

Release Date : Nov 23, 1998

More help for latest information:

Taiwan http://www.aopen.com.tw

USA http://www.aopen-usa.com

http://www.aopenusa.om

http://www.aopenamerica.com

Europe http://www.aopen.nl

publication may be reproduced, transmitted, transcribed, stored in a retrieval

system, or translated into any language or computer language, in any form or

by any means, electronic, mechanical, magnetic, optical, manual or otherwise,

without the prior written permission of this company.

iii

Disclaimer

This company makes no representations or warranties, either expressed or

implied, with respect to the contents hereof and specifically disclaims any

warranties, merchantability or fitness for any particular purpose. Any software

described in this manual is sold or licensed "as is". Should the programs prove

defective following their purchase, the buyer (and not this company, its

distributor, or its dealer) assumes the entire cost of all necessary servicing,

repair, and any incidental or consequential damages resulting from any defect

in the software. Further, this company reserves the right to revise this

publication and to make changes from time to time in the contents hereof

without obligation to notify any person of such revision or changes.

Intel and Pentium are registered trademarks of Intel Corporation.

XT/AT is a registered trademark of International Business Machines Corporation.

AMI is a registered trademark of American Megatrends Inc.

AWARD is a registered trademark of Award Software Inc.

Sound Blaster is a registered trademark of Creative Technology Ltd in the United States

and certain other countries. Sound Blaster-LINK and SB-LINK are trademarks of Creative

Technology Ltd.

Other brand and product names are trademarks and/or registered trademarks of their

respective holders.

FCC Class B Radio Frequency

Declaration of Conformity

This equipment has been tested and found to comply with the limits for a Class B

Subassembly -CPU Board device, pursuant to Part 15 of FCC Rules. Operation is

subject to the following two conditions: 1. This device may not cause harmful interference,

and 2. This device must accept any interference received, including interference that may

cause undesired operation.

Equipment Classification : FCC Class B Subassembly - CPU Board

Type of Product : Intel Pentium II Micro ATX Motherboard

Chipset(s) : Intel 82440BX

AX6BC

Test To Comply

With FCC Standards

FOR HOME OR OFFICE USE

The limits of FCC Part 15 Class B are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

4. Consult the dealer or an experienced radio/television technician for help.

Notice 1:

The changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

Notice 2:

Shielded interface cables, if any, must be used in order to comply with emission limits.

Organization

Chapter 1, Overview, covers the introduction and specifications of the system

board and special features.

Chapter 2, Hardware Installation, describes hardware jumpers, connectors and

memory configuration. There are user friendly drawings to locate jumper and

connector.

Chapter 3, AWARD BIOS, explains the system BIOS and tells how to configure

the system by setting the BIOS parameters.

Appendix A, Frequently Asked Question, collects most frequently asked

question of this product.

Appendix B, Troubleshooting Guide, includes first aid information you need if

you meet trouble, the WWW address and worldwide service telephone/fax are

also included.

Appendix C, Jumper Table Summary, gives you a tabular summary of the

jumper settings discussed in Chapter 2.

Conventions

The following conventions are used in this manual:

Text entered by user,

default settings,

recommended selections

Represent text input by the user, default

settings and recommended selections

<Enter>, <Tab>,<Ctl>, <Alt>,

<Ins>, <Del>, etc

Represent the actual keys that you

have to press on the keyboard.

Note:

Gives bits and pieces of additional

information related to the current topic.

Warning:

Alerts you to any damage that might

result from doing or not doing specific

actions.

Caution:

Suggests precautionary measures to

avoid potential hardware or software

problems.

Important:

Reminds you to take specific action

relevant to the accomplishment of the

procedure at hand.

Tip:

Tells how to accomplish a procedure

with minimum steps through little

shortcuts.

vii

CONTENTS

CHAPTER 1 OVERVIEW

1.1 SPECIFICATIONS ..................................................................4

1.2 OVERCLOCKING ..................................................................6

1.3 SUSPEND TO HARD DRIVE.................................................9

1.4 ZERO VOLTAGE MODEM WAKE UP.............................12

1.5 SYSTEM VOLTAGE MONITORING ................................14

1.6 FAN MONITORING .............................................................14

1.7 CPU THERMAL PROTECTION.........................................15

1.8 MULTI-LANGUAGE BIOS..................................................15

1.9 BATTERY-LESS DESIGN....................................................16

1.10 SOUND BLASTER LINK ...................................................16

CHAPTER 2 HARDWARE INSTALLATION

2.1 JUMPER AND CONNECTOR LOCATIONS ......................2

2.2 JUMPERS .................................................................................4

2.2.1 Selecting the CPU Frequency ..................................4

2.2.2 Setting the CPU Voltage...........................................5

2.2.3 Clearing the CMOS ..................................................5

2.2.4 AGP Ratio.................................................................6

2.2.5 APAR ........................................................................7

2.3 CONNECTORS ........................................................................8

2.3.1 Power Cable .............................................................8

2.3.2 ATX Soft-Power Switch Connector ..........................8

2.3.3 Fan……………………………………………………….9

2.3.4 PS/2 Mouse ..............................................................9

2.3.5 Keyboard ................................................................10

2.3.6 Serial Devices (COM1/COM2) ...............................10

2.3.7 Printer .....................................................................11

2.3.8 USB Device ............................................................11

2.3.9 Floppy Drive............................................................12

2.3.10 IDE Hard Disk and CD ROM ................................12

2.3.11 Hard Disk LED ......................................................13

viii

2.3.12 Panel Connector ...................................................14

2.3.13 IrDA Connector .....................................................15

2.3.14 Modem Wake-up Connector.................................16

2.3.15 LAN Wake-up Connector......................................16

2.3.16 Sound Blaster LINK ..............................................17

2.4 CONFIGURING THE SYSTEM MEMORY ......................18

CHAPTER 3 AWARD BIOS

3.1 ENTERING THE AWARD BIOS SETUP MENU ...............2

3.2 STANDARD CMOS SETUP ...................................................3

3.3 BIOS FEATURES SETUP.......................................................6

3.4 CHIPSET FEATURES SETUP.............................................11

3.5 POWER MANAGEMENT SETUP ......................................16

3.6 PNP/PCI CONFIGURATION SETUP.................................22

3.7 LOAD SETUP DEFAULTS...................................................27

3.8 LOAD TURBO DEFAULTS .................................................27

3.9 INTEGRATED PERIPHERALS ..........................................28

3.10 PASSWORD SETTING.......................................................32

3.11 IDE HDD AUTO DETECTION..........................................32

3.12 SAVE & EXIT SETUP.........................................................32

3.13 LOAD EEPROM DEFAULT ..............................................33

3.14 SAVE EEPROM DEFAULT ...............................................33

3.15 EXIT WITHOUT SAVING .................................................33

3.16 NCR SCSI BIOS AND DRIVERS ......................................33

3.17 BIOS FLASH UTILITY.......................................................34

APPENDIX A FREQUENTLY ASKED QUESTION

APPENDIX B TROUBLESHOOTING

APPENDIX C JUMPER TABLE SUMMARY

1-1

Chapter 1

Overview

AX6BC is a new generation Pentium II based system board that utilizes Intel

82440BX AGPset on ATX PCI/ISA platform. This AGPset is designed for

Pentium II CPU, and supports new architectures such as high speed AGP

graphic port, SDRAM, Ultra DMA/33, Bus master IDE and USB port. It has

three Dual in-line Memory Module (DIMM) that allow to install SDRAM

memory and expand up to a maximum of 768MB. Since the cache is on the

Pentium II CPU card (connector SLOT1), there is no second level cache

onboard Also, AX6BC uses 2M bit Flash ROM BIOS to reserve for future new

functions.

Not only above features, AX6BC also implements many special features as

following.

Jumper-less Design Pentium II VID signal and SMbus clock generator provide

CPU voltage auto-detection and allows user to set CPU frequency through

CMOS setup, no jumper or switch is needed. The correct CPU information is

saved into EEPROM, with these technologies, the disadvantages of Pentium

base jumper-less design are eliminated. There will be no worry of wrong CPU

voltage detection and no need to re-open the housing if CMOS battery loss.

The only jumper left is to clear CMOS, which is a safety hook if you forget the

password.

Battery-less Motherboard AX6BC implements EEPROM and special circuit

(patent applied) that allows you to save your current CPU and CMOS Setup

configurations without the need of battery. The RTC (real time clock) can also

keep running as long as power cord is plugged. If you lose your CMOS data by

accident, you can just reload the CMOS configurations from EEPROM and the

system will recover as usual.

Suspend To Hard Drive "Immediately" turns on system and goes back to the

original screen before power down. You can resume your original work directly

from hard disk without go through the Win95 booting process and run your

application again. Suspend to Hard Drive saves your current work (system

status, memory image) into hard disk. Note that you have to use VESA

Andere Handbücher für AX6BC PROII

Inhaltsverzeichnis

Andere AOpen Hauptplatine Handbücher

AOpen

AOpen s760GXm-US Bedienungsanleitung

AOpen

AOpen i915GMm-HF Datenblatt

AOpen

AOpen AX4BR-U Bedienungsanleitung

AOpen

AOpen AX6BC Pro Gold Einrichtungshandbuch

AOpen

AOpen MK77-333 Datenblatt

AOpen

AOpen AX4GE Max Einrichtungshandbuch

AOpen

AOpen MX 36 LE-U Einrichtungshandbuch

AOpen

AOpen AX34-U Datenblatt

AOpen

AOpen Manual Bedienungsanleitung

AOpen

AOpen s661FXm-7S Bedienungsanleitung

AOpen

AOpen AK89 MAX Bedienungsanleitung

AOpen

AOpen S661FXm-FSN Bedienungsanleitung

AOpen

AOpen AK77-333 Einrichtungshandbuch

AOpen

AOpen AX4T-533 Pro Einrichtungshandbuch

AOpen

AOpen n250a-FR Bedienungsanleitung

AOpen

AOpen AX37D Plus Datenblatt

AOpen

AOpen AK89 MAX Datenblatt

AOpen

AOpen MX4B-533 Bedienungsanleitung

AOpen

AOpen i915Ga-E Bedienungsanleitung

AOpen

AOpen MX46U2-VN Einrichtungshandbuch

AOpen

AOpen AK77-8X Einrichtungshandbuch

AOpen

AOpen AP5T Bedienungsanleitung

AOpen

AOpen MX4LR TV Einrichtungshandbuch

AOpen

AOpen AK77-600GN Datenblatt

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung