APG BlueProTM 510 Bedienungsanleitung
APG doc no. M-23G-510-06 Rev J 1 (7)
BluePRO
TM
Model 510 Bluetooth External Device
Product Specification – Part Numbers and Descriptions
APG Part Number Description
BA-0510-0101A-02
BluePRO
TM
Model 510 Bluetooth Interface Ada ter for Direct Drive
Printer-Kick Cash Drawer with CD-101A Cable and USA ower ada ter
BA-0510-0102A-02
BluePRO
TM
Model 510 Bluetooth Interface Ada ter for Direct Drive
Printer-Kick Cash Drawer with CD-102A Cable and USA ower
ada ter
BA-0510-0101A-03
BluePRO
TM
Model 510 Bluetooth Interface Ada ter for Direct Drive
Printer-Kick Cash Drawer with CD-101A Cable and Multi-Country
ower ada ter
BA-0510-0102A-03
BluePRO
TM
Model 510 Bluetooth Interface Ada ter for Direct Drive
Printer-Kick Cash Drawer with CD-102A Cable and Multi-Country
ower ada ter
BluePro
TM
Model 510 Bluetooth
ash Drawer Interface Adapter
User’s Guide
APG doc no. M-23G-510-06 Rev J 2 (7)
Contents
Product S ecification – Part Numbers and Descri tions ....................................... 1
Introduction and Product Overview .................................................................. 3
O erational Descri tion and Antenna Information .............................................. 5
Declaration of Comformity .............................................................................. 5
Product Label Information ............................................................................... 6
Device Dimension and Resource ...................................................................... 7
APG doc no. M-23G-510-06 Rev J 3 (7)
Introduction and Product Overview
This document describes the APG BluePRO
TM
Model 510 Bluetooth-enabled Cash Drawer Interface
Ada ter and the APG BluePRO
TM
A lication (A ) behavior and all elements that are involved.
The a lication’s o eration is based on Bluetooth communication (IEEE 802.15) between a
Bluetooth-enabled device and the APG BluePRO
TM
Model 510 Bluetooth-enabled Cash Drawer
Interface Ada ter and a rinter-kick cash drawer.
APG BluePRO
TM
Model 510 Bluetooth-enabled Cash Drawer Interface Ada ter is constructed er
Bluetooth version 2.1 (Classic Bluetooth Mode with EDR). The o erating frequency range is
2402-
2480 MHz.
The APG BluePRO
TM
sam le a lication su orts u to a maximum of seven (7) APG Model 510
BluePRO
TM
Bluetooth-enabled Cash Drawer Interface Ada ters.
Bluetooth-Enabled
Thin lient Device
APG ash Drawer's
BluePRO Model 510
Bluetooth-Enabled ash
Drawer Interface
Adapter
Low- ost
'Printer Kick'
ash Drawer
Power Adapter
- US
- Multi- ountry
Bluetooth 802.15
lass 3 Radio
Limited Range
TM
Bluetooth 802.15
lass 2 Radio
Limited range
APG doc no. M-23G-510-06 Rev J 4 (7)
Operational Description and Antenna Information
Operation Description:
The APG BluePRO 510 interface is a cash drawer controller that utilizes Bluetooth signals to
communicate to the host device to o erate a cash drawer. The roduct im lements Bluetooth
version 2.1 (Classic Bluetooth Mode with EDR).
-The interface is aired to a Bluetooth-enabled host device e.g. tablet or handheld.
-Once aired, an a lication running on that host may transmit commands to control a cash
drawer.
-The BluePRO 510 device controls only the APG Model 237A and 437A interface
oDrawer Kick
oQuery cash drawer status
-Default: the BluePRO 510 does not rovide a cash drawer o en/closed status re orting.
Drawer status re orting feature must be activated by the user.
-The device is ower by a 24VDC ower ada ter.
-The device connects to a host as a eri heral device and transmits the commands to
o erate the cash drawer via Bluetooth signals.
-The o erating frequency ranges from 2402-2480 MHz.
-The Bluetooth signal of the device reaches a radius of a roximately 15 foot from the
device.
Antenna Information:
The BluePRO 510 interface uses the internal antenna of the Bluetooth controller chi to transmit
the Bluetooth signal to the host device.
APG doc no. M-23G-510-06 Rev J 5 (7)
Declaration of onformity
F
Note:
This equi ment has been tested and found to com ly with the limits for a Class B digital device,
ursuant to art 15 of the FCC Rules. These limits are designed to rovide reasonable rotection
against harmful interference in a residential installation. This equi ment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a articular installation. If this equi ment does cause harmful
interference to radio or television rece tion, which can be determined by turning the equi ment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the se aration between the equi ment and receiver.
—Connect the equi ment into an outlet on a circuit different from that to which the receiver
is connected.
—Consult the dealer or an ex erienced radio/TV technician for hel .
Changes or modifications not ex ressly a roved by the arty res onsible for com liance could
void the user's authority to o erate the equi ment.
RF Ex osure Guidance: This equi ment com lies with FCC radiation ex osure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or o erating in conjunction with
any other antenna or transmitter, exce t in accordance with FCC multi-transmitter roduct
rocedures.
Industry anada
This device com lies with Industry Canada licence-exem t RSS standard(s). O eration is subject to
the following two conditions: (1) this device may not cause interference, and (2) this device must
acce t any interference, including interference that may cause undesired o eration of the device.
CAN ICES-3(B)/NMB-3(B)
Le résent a areil est conforme aux CNR d'Industrie Canada a licables aux a areils radio
exem ts de licence. L'ex loitation est autorisée aux deux conditions suivantes : (1) l'a areil ne
doit as roduire de brouillage, et (2) l'utilisateur de l'a areil doit acce ter tout brouillage
radioélectrique subi, même si le brouillage est susce tible d'en com romettre le fonctionnement.
Under Industry Canada regulations, this radio transmitter may only o erate using an antenna of a
ty e and maximum (or lesser) gain a roved for the transmitter by Industry Canada. To reduce
otential radio interference to other users, the antenna ty e and its gain should be so chosen that
the equivalent isotro ically radiated ower (e.i.r. .) is not more than that necessary for successful
communication.
APG doc no. M-23G-510-06 Rev J 6 (7)
Conformément à la réglementation d'Industrie Canada, le résent émetteur radio eut fonctionner
avec une antenne d'un ty e et d'un gain maximal (ou inférieur) a rouvé our l'émetteur ar
Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des
autres utilisateurs, il faut choisir le ty e d'antenne et son gain de sorte que la uissance isotro e
rayonnée équivalente ( .i.r.e.) ne dé asse as l'intensité nécessaire à l'établissement d'une
communication satisfaisante.
Label Affixed to the Product
Mechanical S ecifications:
Style Direct thermal label
Material Low-cost a er
Adhesive Permanent
Overlay None
Size 1.20in wide x 0.85in tall
Text Color Black
Font and Size for Text Reasonably large, easily readable and as shown
APG doc no. M-23G-510-06 Rev J 7 (7)
Device Dimension
Resources
For roduct assistance, contact your reseller artner or APG Cash Drawer.
Technical Services and Su ort Grou
APG Cash Drawer, LLC
5250 Industrial Blvd NE
Minnea olis, MN 55421
+1.763.571.5000 ext. 160
E: a gsu ort@a gcd.com
t: @a gtechsu ort
w: htt ://cashdrawer.com
Dimension
Heigh = 1.02IN
Wid h = 2.50IN
Leng h = 2.65IN
Inhaltsverzeichnis
Andere APG Adapter Handbücher
