Apogee AD-8000 Beilage

1999 Apogee Electronics Corp AD-8000/ATR/Lynx Page 1of 2

ApplicationNotes

Product: AD-8000

Topic: Analog Tape Recorder/Time Line Synchronizers/PT

Document #: 14

The best way to synchronize your 2” machine to an AD-8000 is to use a synchronizer to act as

master over the 2” transport. In this application note we will discuss the most popular

synchronizers, the Timeline Lynx systems (Lynx I, Lynx II, and Micro Lynx).

Lynx and Lynx II

The idea is to have the Lynx control the 2” transport. The time code from tape is fed into the

Lynx. The TC is then regenerated (referenced to the Lynx’s internal crystal) and output to the

USD. The USD is consequently always receiving fresh TC referenced to a stable crystal source

(the same source that is controlling the ATR transport). Your digital audio won’t suffer from the

inconsistency in speed (wow and flutter) of a “wild” analog tape recorder.

Lynx Setup (the Lynx must have firmware version 5.0 or higher)

DSPL SEL GEN

CODE TYPE for 29.97 non-drop (which is what you should be using) choose NTSC

REF SRC INT XTL (or VIDEO if using Black Burst as master sync)

GEN MODE TACH>TC

GEN ON switch to ON

DSPL SEL READER

2" ATR

LYNX firmware v. 5.0 or higher

LYNX II any firmware version UNIVERSAL SLAVE DRIVER

(for SSD or VSD use SLAVE CLOCK)

PRO TOOLS

APOGEE AD-8000

TRANSPORT

CONTROL

from tape

GEN

OUT

DIGI-8+

MULTIPIN

CABLE

(or Slave Clock)

SYNC SOURCE: WC

(when using Slave

Clock select AMBus

slot w/ Digi-8+ card)

CLOCK REF: LTC

POSITION REF: LTC

AD-8000 Application Notes

1999 Apogee Electronics Corp AD-8000/ATR/Lynx Page 2of 2

TRAN MODE ONLINE

MASTER switch to ON

REF SRC INT XTAL (or VIDEO if using Black Burst as master sync)

Lynx II Setup (any Lynx II software)

DSPL SEL GEN

GEN CODE select which type (29.97)

GEN REF INT

*Press and hold SHIFT and press GEN ON to select TACH > TC

GEN ON switch to ON

DSPL SEL RDR

TRAN MODE ONLINE

MSTR ON

Make sure that the master reference is RDR and not VSO.

The most-recently developed synchronizer from Time Line, the Micro Lynx (with the addition of

the ACG card), can provide a Word Clock output to the AD-8000 and an MTC output directly to

the Pro Tools software via a serial cable to the Mac, effectively acting as the only necessary

synchronizer. The WC output and the regenerated TC output are synchronous providing the

best possible lock to the ATR. While a detailed description of the Micro Lynx setup is beyond the

scope of this note, the Micro Lynx manual has very good application notes describing its use as

an interface to a DAW. Setting up a Micro Lynx without the ACG card is similar to the setups

above with the following notes:

Make sure that the transport setup is not in VSO mode (should be in INT or VIDEO)

Generator output is connected to the USD as above, the analog transport (A, B, C, or D) should be

master.

The time code generator should be slave.

The Micro Lynx with the ACG card can be setup up as follows (sans the USD):

2" ATR

Micro LYNX

PRO TOOLS

APOGEE AD-8000

TRANSPORT

CONTROL

from tape

GEN

OUT

DIGI-8+

MULTIPIN

CABLE

SYNC SOURCE: WC

MTC

Andere Handbücher für AD-8000

Inhaltsverzeichnis

Andere Apogee Medienkonverter Handbücher

Apogee

Apogee AD-8000 Beilage

Apogee

Apogee Rosetta 200 Bedienungsanleitung

Apogee

Apogee DA-16 Bedienungsanleitung

Apogee

Apogee AD-1000 Bedienungsanleitung

Apogee

Apogee AD-500 Bedienungsanleitung

Apogee

Apogee AD-16X Bedienungsanleitung

Apogee

Apogee Rosetta 200 Bedienungsanleitung

Apogee

Apogee DA-16X Bedienungsanleitung

Apogee

Apogee Rosetta 200 Kurzanleitung

Apogee

Apogee AC-421 Bedienungsanleitung

Apogee

Apogee AD-16 Bedienungsanleitung

Apogee

Apogee PSX-100 Bedienungsanleitung

Apogee

Apogee Rosetta 800 Bedienungsanleitung

Apogee

Apogee Mini-DAC Bedienungsanleitung

Apogee

Apogee Rosetta AD Bedienungsanleitung

Apogee

Apogee PSX-100 Bedienungsanleitung

Apogee

Apogee AC-422 Bedienungsanleitung

Apogee

Apogee Rosetta 800 Bedienungsanleitung

Apogee

Apogee Mini-Me Bedienungsanleitung

Apogee

Apogee AD-8000 Bedienungsanleitung

Apogee

Apogee AD-8000 Bedienungsanleitung

Apogee

Apogee Mini-Me Bedienungsanleitung

Apogee

Apogee DA-2000 Bedienungsanleitung

Apogee

Apogee AD-16X Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung