Apollo 120 Bedienungsanleitung

APOLLO 120 /150 III

12.1”/15.1” TFT Intel®

Celeron/Pentium®III

Plastic-housing Panel PC with

Versatile

Stand design

User’s Manual (Version 2207)

This document is copyrighted 2002 by the Manufacturer.

The information provided in this document has been

carefully checked and is accurate at the time of publication.

However, the Manufacturer assumes no responsibility for

any infringements of patents or other rights of third parties

that may result from its use.

No part of this publication may be reproduced, stored in a

retrieval system, or transmitted in any form of or via any

means without the prior written permission of the

Manufacturer. Further, this publication and features

described herein are subject to change without notice.

Trademarks

All brand and product names used for identification in this

document are trademarks or registered trademarks of their

respective companies.

Printed in Taiwan

Unpacking

After unpacking the APOLLO 120/150 III carton, check

and see if the following items are included and in good

condition.

uAPOLLO III main system x 1

uAccessories

-Power cord (90o)x 1

-External FDD cable (optional) x 1

-External 5V/12V DC power cable (optional) x 1

-Utilities & drivers & user manual CD diskettex 1

(for touchscreen drivers, please download the

updated drivers from the following website

http://www.3m.com or

http://www.elotouch.com

-Base knob with rubber cushionx 1

-Panel mounting kit (optional) x 1 set

Make sure that all of the items listed above are present. If

any of the above items is missing, contact your dealer

immediately.

Warranty

All products manufactured by the Manufacturer. are

warranted against defective materials and workmanship for

one year starting from the date of delivery to the original

purchaser.However, warranty or service will not be

extended if 1). the product is repaired, modified or altered

unless such repair, modification or alteration is authorized

by the Manufacturer; or 2). the product serial number or

warranty label is defaced or missing; or 3). the product is

not properly used.

Important Safety Precautions

Before getting started, read these instructions and save

them for later reference.

1. Turn off the computer before cleaning. Clean with a

damp or dry cloth only. Do not spray any liquid cleaner

on screen directly.

2. The power outlet socket used to plug in the computer

power cord must be located near the system and easily

accessible. Do not use outlets on the same circuit of

the systems that regularly switched on and off.

3. Make sure the voltage of the power source is correct

before connecting the computer to the power outlet.

4. If the computer is sharing an extension cord with other

devices, make sure the total ampere rating of the

devices plugged into the extension cord does not

exceed the cord’ s ampere rating.

5. Do not expose the power cord, extension cord and

power outlet to moisture.

6. Install the computer on a reliable surface to prevent

damage caused by dropping.

7. This computer is not equipped with an operating

system. An operating system must be loaded first

before installing any software into the computer.

8. Disconnect the power cord from the computer before

any installation. Make sure both the computer and the

external devices are turned off. The sudden surge of

power may ruin any sensitive components. Also make

sure the computer is properly grounded.

9. During installation of any internal components, be sure

to ground yourself to keep from any static charge.

Most electronic components are sensitive to the static

electric charge. Use a grounding wrist strap and place

all electronic components in any static-shielded

devices.

10. The openings on the computer enclosure are for the

cabin ventilation to prevent the computer from

overheating. DO NOT COVER THE OPENINGS.

11. The brightness of the flat panel display will decrease

with use. However, hours of use will vary depending on

the application environment.

12. If the computer is equipped with a touch panel, avoid

using sharp objects to operate the touch panel.

Scratches on the touch panel may cause

mal-calibration or non-function to the panel.

13. The LCD panel display is not subject to shock or

vibration. When assembling the computer, make sure

it is securely installed.

Table of Contents

1. INTRODUCTION............................................. 1-1

1.1. GENERAL INFORMATION ..................................1-2

1.2. WHAT COVERS IN THIS MANUAL.........................1-3

1.3. SPECIFICATIONS...........................................1-5

1.4. DIMENSIONS .............................................1-10

1.4.1. APOLLO 120 ........................................1-10

1.4.2. APOLLO 150 ........................................1-11

2. USING THE SYSTEM..................................... 2-13

2.1. IDENTIFYING THE SYSTEM..............................2-14

2.1.1. Front View...........................................2-14

2.1.2. Side Views...........................................2-15

2.1.3. I/O Outlets..........................................2-16

2.2. SYSTEM SETUP FOR THE FIRST-TIME USE............2-17

2.2.1. Installation Procedures..........................2-17

2.2.2. Running the BIOS Setup .......................2-18

2.2.3. Operating System and Driver Installation 2-19

3. VERSATILE STANDING & MOUNT OPTIONS .3-21

3.1. VERSATILE STAND .......................................3-22

3.1.1. Standing Upright..................................3-22

3.1.2. 45 to 900Free Standing ........................3-22

3.1.3. Fixed Standing.....................................3-23

3.1.4. Cable Management...............................3-24

3.2. WALL MOUNTING AND MOBILE APPLICATIONS.......3-25

3.3. PANEL MOUNTING .......................................3-27

3.4. KIOSK INTEGRATION ..................................3-28

4. I/O CONNECTION........................................ 4-29

4.1. PARALLEL PORT ..........................................4-30

4.2. COM PORTS X 4........................................4-31

4.3. 100/10 BASE-T ETHERNET (RJ-45)................4-33

4.4. VGA INTERFACE.........................................4-33

4.5. 2ND DISPLAY GRAPHIC SUPPORT MODE...............4-34

4.5.1. When System Memory Clock = 66MHz....4-34

4.5.1.1. Single Display Mode........................4-35

4.5.1.2. Mirror Display Output Mode..............4-36

4.5.1.3. Multiple Display Output Mode ...........4-37

4.5.2. When System Memory Clock = 100MHz ..4-38

4.5.2.1. Single Display Mode........................4-38

4.5.2.2. Mirror Display Output Mode..............4-39

4.5.2.3. Multiple Display Output Mode ...........4-40

4.5.3. When System Memory Clock = 133MHz ..4-41

4.5.3.1. Single Display Mode........................4-42

4.5.3.2. Mirror Display Output Mode..............4-43

4.5.3.3. Multiple Display Output Mode ...........4-44

4.6. PS/2 KEYBOARD INTERFACE...........................4-45

4.7. PS/2 MOUSE INTERFACE...............................4-45

4.8. EXTERNAL FDD (DB-15) .............................4-46

4.9. +5V/12V DC-OUT ....................................4-47

4.10. VR BRIGHTNESS CONTROL ............................4-47

4.11. DIO (DIGITAL INPUT & OUTPUT)....................4-48

4.12. AUDIO INTERFACE (LINE-IN, MIC-IN, SPK-OUT).4-50

4.13. USB PORTS..............................................4-50

4.14. IR KEYBOARD SENSOR (OPTIONAL)..................4-50

4.15. AC/DC INLET/POWER SWITCH .......................4-50

5. HARDWARE INSTALLATION AND UPGRADE.5-51

5.1. RECOGNIZING THE SYSTEM MAJOR PARTS ...........5-53

5.2. INSTALLING THE CPU...................................5-55

5.3. INSTALLING THE SDRAM MEMORY MODULE ........5-56

5.4. MOTHERBOARD ASSEMBLY .............................5-57

5.5. TOUCH CONTROLLER ASSEMBLY .......................5-58

5.6. HDD MODULE ASSEMBLY ..............................5-59

5.7. TOUCHSCREEN OR FRONT BEZEL ASSEMBLY .........5-60

5.8. LCD MODULE ASSEMBLY...............................5-62

5.9. CD-ROM/DVD-ROM/FDD MODULE ASSEMBLY ..5-66

5.9.1. Internal CD-ROM/FDD Assembly ............5-66

5.9.2. External FDD Connection.......................5-68

5.10. POWER MODULE ASSEMBLY ............................5-69

5.11. EXPANSION OUTLETS & RISER CARD ASSEMBLY....5-71

5.12. BACK PANEL ASSEMBLY.................................5-72

5.13. STAND MODULE ASSEMBLY.............................5-73

6. SYSTEM MOTHERBOARD & I/O BOARD........ 6-75

6.1. APOLLO III MOTHERBOARD..........................6-76

6.1.1. General Information .............................6-76

6.1.2. Specifications.......................................6-77

6.1.3. Locating Jumpers & Connectors..............6-79

6.1.4. Jumpers & Jumper Setting.....................6-80

6.1.4.1. DOC 2000 Address Setting (JP1).......6-81

6.1.4.2. Clear CMOS (JP2) ...........................6-81

6.1.4.3. 232/485 Setting (JP5,6,7,8,9 & 10) ..6-81

6.1.5. Connectors & Pin Assignment.................6-82

6.1.5.1. PWR3: ATX Power connector ............6-83

6.1.5.2. J2: CD Audio IN.............................6-84

6.1.5.3. J7: HDD LED & ACPI LED & SMI........6-84

6.1.5.4. J8: IR / CIR Connector ....................6-84

6.1.5.5. J9: Power LED & KB ........................6-85

6.1.5.6. SW1: ATX Power ON/OFF & Reset .....6-85

6.1.5.7. COM3............................................6-85

6.1.5.8. LCD1: LCD Connector......................6-86

6.1.5.9. INV1: LCD Inverter Connector.........6-87

6.1.5.10. FDD1: FDD connector.....................6-87

6.1.5.11. IDE1/IDE2: Primary/Secondary HDD.6-88

6.1.5.12. SCSI 1: PRT Port/Serial Port/DIO Port6-89

6.1.5.13. SCSI 2: KB/MS/VGA/LAN USB/FDD...6-90

6.1.5.14. CN4: PCI/ISA Expansion Slot............6-91

6.2. APOLLO III I/O BOARD ..............................6-94

6.2.1. Locating Jumpers & Connectors..............6-94

6.2.2. Jumpers & Jumper Setting.....................6-95

6.2.2.1. JP1: Keyboard Power Select ............6-95

6.2.2.2. COM port Power Selection................6-95

6.2.3. Connectors & Pin Assignment.................6-96

6.2.3.1. KB1: PS/2 Keyboard Connector ........6-97

6.2.3.2. KBMS: PS/2 Mouse .........................6-97

6.2.3.3. COM1, COM2, COM4: DB-9.............6-97

6.2.3.4. CN1: DC Power Output...................6-98

6.2.3.5. LPT1: D-SUB-25 Parallel Port............6-98

6.2.3.6. CRT1: VGA (D-SUB 15 Pin) ..............6-98

6.2.3.7. FDD1: External FDD Connector.......6-99

6.2.3.8. J11: USB 1 , USB2 Connector.........6-99

6.2.3.9. DIO1: RJ-11 Connector ...................6-99

6.2.3.10. LAN1: RJ-45 Ethernet Connector ......6-99

6.2.3.11. MIC1...........................................6-100

6.2.3.12. LINE 1.........................................6-100

6.2.3.13. SPK 1..........................................6-100

6.2.3.14. SCSI 1: PRT/Serial Port/DIO Port....6-101

6.2.3.15. SCSI 2: KB/MS/VGA/LAN USB/FDD.6-102

7. AWARD BIOS SETUP.................................. 7-103

7.1. AWARD BIOS..........................................7-104

7.2. CONTROL KEY DEFINITION...........................7-105

7.3. GETTING HELP .........................................7-106

7.3.1. Main Menu.........................................7-106

7.4. AWARD BIOS SETUP ...............................7-106

7.4.1. AWARD BIOS Setup Main Menu............7-106

7.4.2. Standard CMOS Features.....................7-108

7.4.3. Advanced BIOS Features.....................7-111

7.4.4. Advanced Chipset Features..................7-115

7.4.5. Integrated Peripherals ........................7-121

7.4.6. Power Management Setup...................7-125

7.4.7. PnP/PCI Configuration.........................7-129

7.4.8. PC Health Status ................................7-131

7.4.9. Frequency Voltage Control...................7-132

7.4.10. Load Fail-Safe Defaults .......................7-134

7.4.11. Load Optimized Defaults......................7-135

7.4.12. User Password ...................................7-136

7.4.13. Save and Exit Setup ...........................7-137

7.4.14. Exit Without Saving............................7-138

8. SOFTWARE & DRIVERS INSTALLATION ..... 8-139

8.1. ETHERNET DRIVERS...................................8-140

8.2. PC 610 AGP XGA...................................8-141

8.3. AUDIO SETUP ..........................................8-142

8.4. DRIVER INSTALLATION................................8-143

9. TOUCHSCREEN........................................... 9-145

9.1. MICROTOUCH TOUCH DRIVER INSTALLATION......9-146

9.1.1. Two types of MicroTouch touchscreens..9-146

9.1.2. TouchWare–the MicroTouch Software....9-147

9.1.3. Installing TouchWare ..........................9-149

9.1.4. Uninstalling TouchWare.......................9-151

9.1.5. Calibrate the MicroTouch Touchscreen ..9-152

9.1.6. Getting More Information ....................9-153

9.2. ELO TOUCHSCREEN DRIVER INSTALLATION ........9-154

9.2.1. System Requirements.........................9-154

9.2.2. About Elo Software.............................9-155

9.2.3. Installation........................................9-156

9.2.4. Installing MonitorMouse for Win 95.......9-161

9.2.5. Installing MonitorMouse for Win NT.......9-165

9.2.6. Getting More Information ....................9-167

APPENDIX .....................................................9-168

A: LCD SPECIFICATION.........................................9-168

B: DISKONCHIPINSTALLATION..............................9-171

C: WAKE-ON-LAN ..............................................9-173

D: FIRST MB MEMORY MAP....................................9-176

E: POWER SUPPLY................................................9-177

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Apollo Touchscreen Handbücher

Apollo

Apollo 120 III Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

Advantech

Advantech TPC-30 Series Bedienungsanleitung