The temperature of the chilled
water can be set from 39˚F to
52˚F. When the chilling LED
is the set temperature has
been reached. This can take
up to one hour.
13
Connect and turn on the water
supply. Then connect the
power supply.
WARNING: On reservoir models the Carbon bag mustbe
removed from the cold tank before connecting to power and water.
Dispense from all options (to Turn on the cold switch (located
at the rear on the unit) to begin
the chilling process.
Turn on the hot switch (also
located at the rear on the unit) to
activate the heating element.
5
Flush through 10 litres of water
before use.
10 L
cold
hot
heating
cold
hot
6
Chilled & Ambient:
When the Green LED is on the
cooling circuit is activated.
When the Yellow LED is on the
compressor is operating.
Chilled & Hot:
When the Green LED is on the
cooling circuit is activated.
When the Yellow LED is on
heating circuit is activated.
When the Red LED is on the
heating element is activated.
7
Allow up to 1 hour for the
water to reach its minimum
temperature.
1
hour
Operation
2
The relevant indicator lights
will be lit.
4
8
52˚F
39˚F
