ARAG BRAVO 303 Bedienungsanleitung
4673XXX
BRAVO 3XX SERIES COMPUTERS
INSTALLATION
Software rel. 60
2
English
• LEGEND OF SYMBOLS
=Generic danger
=Warning
=Crop sprayer
=Multi-row spraying
=Orchard sprayer
This manual is an integral part of the equipment to which it refers and must accompany the equipment in
case of sale or change of ownership. Keep it for future reference; ARAG reserves the right to modify the
specifications and instructions regarding the product at any time and without prior notice.
3
English
CONTINUES
CONTENTS
• Legend of symbols ..........................................................................................................2
• Preface and scope of the manual...................................................................................5
• Using the manual.............................................................................................................5
• Limits ................................................................................................................................5
• Liability .............................................................................................................................5
1 Risks and precautions before assembly .......................................................................6
2 Bravo DSB ........................................................................................................................6
3 Intended use.....................................................................................................................6
4 Contents of the package .................................................................................................7
5 Location on the machine ................................................................................................8
5.1 System configuration ...............................................................................................8
5.2 Locating the computer ...........................................................................................10
5.3 Mounting the bracket .............................................................................................12
5.4 Installing the remote unit .......................................................................................12
5.5 Location of the control unit ....................................................................................12
6 Connecting the computer to the machine...................................................................13
6.1 General precautions for cable runs .......................................................................13
6.2 Power connection ..................................................................................................14
7 Connecting the cable to the control unit and services ..............................................15
7.1 Connecting the multi-pin connector .......................................................................15
7.2 Connecting the valves ...........................................................................................15
7.3 Connecting the sensors and other services ..........................................................16
8 Accessory connections ................................................................................................17
8.1 Pump Protector......................................................................................................17
8.2 Foam marker .........................................................................................................17
8.3 Printer ....................................................................................................................18
8.4 Transferring the counter data to a PC ...................................................................18
9 Programming .................................................................................................................19
9.1 Pre-programming tests and checks.......................................................................19
9.2 Advanced menu.....................................................................................................19
9.3 Control panel .........................................................................................................21
9.4 Using the keys and switches .................................................................................21
9.5 Display (delivery / programming)...........................................................................24
9.6 Display (programming) ..........................................................................................25
9.7 Launch protection - BRAVO 32X serie ..................................................................26
9.8 Setting the display brightness................................................................................26
9.9 Access to advanced programming ........................................................................26
9.10 Units of measurement (Menu 30.0) .......................................................................27
9.11 Number of sections (Menu 40.0) ...........................................................................27
9.12 Boom width (Menu 43.0) .......................................................................................28
9.12.1 Technical headings.................................................................................................... 29
9.13 Nozzle spacing (Menu 46.0)..................................................................................30
9.14 Type of section valve (Menu 50.0) ........................................................................30
9.15 Operating mode.....................................................................................................31
4
English
9.16 Flow meter (Menu 60.0) ........................................................................................32
9.16.1 Automatic flow meter constant setting (Menu 60.1) .................................................. 33
9.17 Pressure transducer ..............................................................................................35
9.17.1 Manual pressure value setting................................................................................... 35
9.18 Type of control (Menu 70.0) ..................................................................................36
9.19 Tank volume and reserve (Menu 80.0)..................................................................37
9.19.1 Filler flow meter (Menu 80.1) ..................................................................................... 38
9.20 Foam marker activation (Menu 83.0).....................................................................39
9.21 Printer language (Menu 90.0)................................................................................39
9.22 RPM sensor (Menu 100.0) ....................................................................................40
9.23 Pump Protector (Menu 101.0) ...............................................................................41
10 Maintenance / diagnostics / repairs .............................................................................42
10.1 Fuse replacement..................................................................................................42
10.2 Test functions ........................................................................................................43
10.2.1 Speed simulation (Menu 190.0)................................................................................. 44
10.2.2 Keys and switches (Menu 190.1) .............................................................................. 45
10.2.3 Printer (Menu 190.6) .................................................................................................. 47
10.2.4 Software version ........................................................................................................49
10.3 Troubleshooting.....................................................................................................50
10.4 Problems due to the type of system and computer’s mode of operation..................... 51
11 Technical data................................................................................................................53
11.1 Data and units .......................................................................................................53
11.2 Computer technical data........................................................................................54
12 Disposal at the end of service ......................................................................................54
5
English
• PREFACE AND SCOPE OF THE MANUAL
This manual contains all information required for assembling and connecting BRAVO computer,
along with instructions for setting up the computer software.
Any other information is given in specic sheets, for the exclusive use of the installation technician,
which contain special information for each model of computer.
• USING THE MANUAL
This manual contains information reserved for the installation technician, and hence makes use
of technical terminology without the explanations which would otherwise be required by the end
user.
THIS MANUAL IS FOR USE EXCLUSIVELY BY AUTHORIZED INSTALLATION TECH-
NICIANS.
THE MANUFACTURER IS NOT LIABLE FOR USE OF THIS MANUAL BY UNAUTHORI-
ZED AND UNQUALIFIED PERSONS.
• LIMITS
The description of the installation process refers to a generic computer without reference to specic
models, unless a particular installation procedure applies only a specic type of computer.
• LIABILITY
The installation technician is responsible for implementing the installation procedure in a professio-
nal manner so as to guarantee perfect functionality of the computer, whether supplied solely with
ARAG components or with components from other manufacturers.
ARAG recommends using its own components for the installation of the control systems.
If the installation technician should decide to use components provided by other manufacturers,
even if this should not require the modication of the cabling or other systems, he does so at his
own exclusive risk and liability.
The installation technician is responsible for compatibility with components and accessories pro-
vided by other manufacturers.
If, as a consequence of the above recommendations, the computer or other ARAG components
installed in combination with components provided by other manufacturers should suffer damage
of any kind, no form of liability, whether direct or indirect, will be recognized by ARAG.
6
English
1 RISKS AND PRECAUTIONS BEFORE ASSEMBLY
All installation work must be done with the battery disconnected, using suitable
tools and any individual protection equipment deemed necessary.
Use ONLY clean water for treatment tests and simulations: using che-
micals during simulated treatment runs can seriously injure persons in
the vicinity.
2 BRAVO DSB
ARAG has designed and manufactured a diagnostics system for Bravo series computers and the
systems to which they may be connected.
BRAVO DSB (article code 467003) provides reliable computer diagnostics (not of the control
unit to which it is connected) so as to enable the resolution of any potential problems experienced
with the system.
3 INTENDED USE
The device you have purchased is a computer which, when connected to a valve or suitable control
unit, makes it possible to control all phases of treatment in agricultural applications directly from
the cab of the agricultural machine in which it is installed.
The apparatus is designed and realised in compliance with the following European
Directives and Harmonized Standards:
- 89/336/EEC and modications
(Electromagnetic Compatibility)
- EN ISO 14982:1998
(Agricultural and forestry machinery - Electromagnetic Compatibility)
7
English
4 CONTENTS OF THE PACKAGE
The following table lists the components contained in the BRAVO computers package:
BRAVO SERIE 30X
BRAVO SERIE 32X
Legend:
1Control panel
2Instruction booklets
3Speed sensor kit
4a Complete cabling for connection to the valves and sensors
4b Control unit complete with cabling for valves and sensors
5a Gaskets for section valve connectors
5b Gaskets for hydraulic valve ttings
6Power connector
7Power cable
Tab. 1
8
English
5 LOCATION ON THE MACHINE
5.1 System conguration
Assembly diagram for orchard sprayers - BRAVO 302A / 304A
Legend:
AControl panel
BStarter key
SSpeed sensor
MPressure transducer
FFlow meter
PControl valve
GDrain valve
1-4 Section valves
Tab. 2
Assembly diagram for crop sprayers with membrane pump - BRAVO 30X
Legend:
AControl panel
BStarter key
SSpeed sensor
DFiller pump
MPressure transducer
FFlow meter
TFiller ow meter or
Pump Protector
RFoam marker
XRpm sensor
or Pump Protector
PControl valve
GMain valve
1-5 Section valves
Tab. 3
CONTINUES
9
English
Continues par. 5.1 - System configuration
Assembly diagram for crop sprayers with centrifugal pump - BRAVO 30X
Legend:
AControl panel
BStarter key
SSpeed sensor
DFiller pump
MPressure transducer
FFlow meter
TFiller ow meter
RFoam marker
XRpm sensor
PControl valve
1-5 Section valves
Tab. 4
Assembly diagram for crop sprayers with membrane pump - BRAVO 32X
Legend:
AControl panel
BStarter key
SSpeed sensor
DFiller pump
MPressure transducer
FFlow meter
TFiller ow meter or
Pump Protector
RFoam marker
XRpm sensor
or Pump Protector
PControl valve
GMain valve
1-5 Section valves
EHydraulic unit
URemote unit
Tab. 5
CONTINUES
10
English
Continues par. 5.1 - System configuration
Assembly diagram for crop sprayers with centrifugal pump - BRAVO 32X
Legend:
AControl panel
BStarter key
SSpeed sensor
DFiller pump
MPressure transducer
FFlow meter
TFiller ow meter or
Pump Protector
RFoam marker
XRpm sensor
or Pump Protector
PControl valve
1-5 Section valves
EHydraulic unit
URemote unit
Tab. 6
5.2 Locating the computer
• BRAVO series computers must be installed in the cab of the tractor, in observance of the following
precautions:
- DO NOT install the computer in an area subject to excessive vibration or collisions
as this may damage it or lead to its controls being accidentally actuated;
- install the unit is a visible position within easy reach by hand: bear in mind that
the computer should not obstruct the operator’s freedom of movement or block his
view.
• Bravo series 32X:
mount the control unit at the rear of the tractor, near to the control and hydraulic units.
Install the four-pole connector running from the control unit to the control panel.
Note the connections required for the computer to operate (table 8 and 10), the
required length of the cables, and provide adequate space for the connectors and
cable runs.
An identication symbol is located next to each connector to indicate its function;
for the conguration of the systems, refer to par. 5.1 - System conguration.
CONTINUES
Dieses Handbuch passt für folgende Modelle
7
Inhaltsverzeichnis
Andere ARAG Desktop Handbücher
