1）Press “HUMID”once, the 40%RH is selected.
Press “HUMID”for the 2nd time, the 60%RH is selected.
Press “HUMID”for the 3rd time, the 80%RH is selected.
Press “HUMID”for the 4th time, the continuous mode is selected.
The circle is repeated like this……
2 ）When sensor detected ambient humidity is 1% lower than your setting, the
dehumidification stops, goes off and fan works at low speed. If ambient humidity is
5% higher than the setting, the dehumidification is activated again.
3) When the continuous mode is selected, the appliance runs regardless of the ambient
humidity ratio.
4. Press “SPEED”to select the fan blower working at “High speed” level or “Low speed” level.
1) It shows ‘L’when working at “Low speed” level and shows ‘H’when working at “High
speed” level.
2) When sensor detected ambient temperature exceeds 32°C, it goes to the “High speed”
level automatically. When sensor detected ambient humidity is lower than 30°C, fan
turns into previous selected speed automatically.
3) When sensor detected ambient humidity is lower than your setting, fan works at low
speed.
4) When the appliance auto defrosts, the fan works at high speed.
5. Press “TIMER”:
Press “TIMER”to timer power on/off and set the working hour of units.
1. Time reserved for operating:
When appliance is powered off or in standby state, press Timer 1H, 2H, 4H, 8H or flexible
working time for the reservation of operating, timer symbol displayed on the screen.
2. Time set for switching off:
When appliance is powered on, press Timer 1H, 2H, 4H, 8H or flexible working time to set
the unit’s running hour. Along with time elapsed, remaining hours also shown on the
screen, until time is up.
3. When the time is up, the appliance shutdown or startup automatically.
6. Press “SWING”to oscillate flapping air guide from 45 to 90 degree automatically. Press again to fix a
stationary angle with 45 to 90 degree. When the swing function is activated, the corresponding indicator
illuminates.
Automatic Defrosting
A working cycle: When the appliance work in low temperature, frost will be produced on the surface of
evaporator. To ensure the appliance performs well, the automatic defrost function is designed with the
appliance.
