Argos 274/9668 Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

Width - 149.5cm

Depth - 50cm

Height - 199.5cm

3 Door Tall Robe

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800

Issue 8 - 19/01/15

Important - Please read these instructions fully before starting assembly

ALR3005

274/9668

239/2819

259/2468

Issue 2 - 10/06/13 - Unwanted text on the panels page, underneath the Hanging Rails.

Confirmed with Simon at Dec Panels that the Large Hanging Rails are 957mm and the Small ones are 471mm.

Issue 3 - 30/07/13 - Drillings on Side panels and Divider have altered.

The Top Hanging Rail, both Shelf positions and the Back Rail have all moved.

The Left Side is now D2048B, the Right Side is now D2049B and the Divider is now D2051B.

Issue 4 - 03/04/14 - Add 5 plastinails.

Remove old cat codes and add new ones.

Issue 5 - 04/09/14 - Round Back Holders have been changed to Oblong Back Holders.

Issue 6 - 09/09/14 - Removed‘Anderson’ from the title so it can be used for both Anderson and Normandy.

Added 3 new cat codes for Normandy.

355/1288

330/5386

355/3262

Issue 7 - 15/12/14 - Side panels changed to be common with 33R. Both go up an issue.

Divider changed to suit new sides. Panel goes up an issue.

Add notes to side panel prep saying which holes are not used

Issue 8 - 19/01/15 - Overbalance bracket replaced with Strap.

Back Holders now shown fitted vertically.

Updated helpline number.

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 89kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 1, 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note: If required the next page

can be cut out and used as

reference throughout the

assembly. Keep this page with

these instructions for future

reference.

Tools required

Rule

ScissorsSquare

Spirit

level

Hammer Bradawl

Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

Step

ladder

Electric drill

(only use

when drilling

into walls)

mm 10 20 30 40 50 60 70 80 90 100

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: It is

recommended that this unit is

secured to a wall using the

overbalance protector kit

supplied or, an alternative fixing

method of your choice.

• Dispose of all packaging

carefully and responsibly.

Components - Panels

Please check you have all the panels listed below

80% x 3

90% x 1

If you have damaged or missing components, call the

Customer Helpline: 03456 400800 quoting the reference

numbers below

12 3

Top (D2047A)

(1495 x 496mm)

Base (D2050A)

(1461 x 470mm)

Large Shelf (D2052A)

(965 x 467mm)

5Back Rail (D2053A)

(965 x 120mm)

Plinth (D2054A)

(1461 x 80mm)

Small Shelf (D2060A)

(479 x 467mm)

Door (D2056A)

(1894 x 494mm) x 3

Large Hanging Rail (FHR957)

(957mm long) x 2

Small Hanging Rail (FHR471)

(471mm long) x 2

Large Back (X956)

(1914 x 988mm)

Small Back (X955)

(1914 x 499mm)

Divider (D2051C)

(1883 x 469mm)

Left Side (D2048C)

(1978 x 471mm)

Right Side (D2049C)

(1978 x 471mm)

Please check you have all the fittings listed below

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 03456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Wooden dowel (F22) x 10

Metal dowel (F901) x 14

Hinge plate (F523) x 12

Nail screw (F277) x 8

Nail (F51) x 46

Large locking

nut (F900) x 14

Hinge (F518) x 12

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Ruler - Use this ruler to help correctly identify the screws

Shelf stud (F110) x 8

13mm Screw (F63) x 32

Rail holder

(F1014) x 8

19mm Screw (F461) x 6

Handle (F266) x 3

40mm Screw (F910) x 2

Plastic Nail (F91) x 5

Back holder (F276) x 8

*These can also be round

PStrap Screw Washer x 2

Overbalance protector kit (F269) x 1

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 03456 400800 quoting the reference

numbers below

Step 1

80% x 3

90% x 1

Prepare the divider

Screw a metal dowel

into the divider .

Note: Tighten metal

dowels up fully against

the panel.

Fit 4 hinge plates onto

the divider , making

sure that the slot is

facing towards the

finished front edge.

Insert 2 large locking

nuts into the divider

. .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Tap 2 wooden dowels

into the divider .

Note: Wooden dowels

must not stick out from

the edge by more than

10mm or they may

damage other panels.

Prepare the base

Insert 4 large locking

nuts into the base .

Tap 2 wooden dowels

into the base .

Step 2

Finished

front edge

10mm

plain chipboard surface

Finished

front edge

Finished

front edge

Finished

front edge

Assembly Instructions

Step 3

Finished

front edge

Step 4

Fit the base to the

divider

Push the base onto

the divider and

secure with 2 screws .

Prepare the left side

Screw 4 metal dowels

into the left side .

Fit 4 hinge plates onto

the left side , making

sure that the slot is

facing towards the

finished front edge.

Insert 2 large locking

nuts into the left side

. .

Tap a wooden dowel

into the left side .

plain chipboard surface

These 2 holes

are not used

Assembly Instructions

Step 5

Step 6

Prepare the right side

Screw 3 metal dowels

into the right side .

Insert 2 large locking

nuts into the right

side .

Fit 4 hinge plates onto

the right side , making

sure that the slot is

facing towards the

finished front edge.

Tap a wooden dowel

into the right side .

Fit the right side to

the base

Push the right side

onto the base .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the base .

Note: Turn the large

locking nuts as far as

they will go - more than

1/2 a turn.

Finished

front edge

These 2 holes

are not used

Assembly Instructions

Step 7

Step 8

plain chipboard surface

Prepare the plinth

Insert 2 large locking

nuts into the plinth .

Tap 2 wooden dowels

into the plinth .

Fit the plinth

Push the plinth onto

the right side .

Use a screwdriver to

tighten the large locking

nut fitted to the plinth

. .

Step 9

Finished

front edge

Prepare the back rail

Insert 2 large locking

nuts into the back rail

. .

Tap 2 wooden dowels

into the back rail .

plain chipboard surface

Finished

front edge

Assembly Instructions

Step 10

Step 11

Fit the back rail to the

left side

Push the back rail

onto the left side .

Use a screwdriver to

tighten the large locking

nut fitted to the back

rail .

Fit the left side

Push the left side

onto the base and

plinth , then push the

back rail onto the

divider .

Use a screwdriver to

tighten the 4 large

locking nuts fitted to

the back rail , base ,

and plinth .

5 8

Finished

front edge

plain chipboard surface

Assembly Instructions

Step 12

Step 13

Rounded

front edge

Prepare the top

Screw 6 metal dowels

into the top .

Fit the top and plastic

nails

Push the top onto

the assembly.

Use a screwdriver to

tighten the 6 large

locking nuts fitted to

the left side , right

side and divider .

Tap 2 plastic nails

into the bottom edge of

each of the sides and

. .

Tap 1 plastic nail into

the bottom edge of the

plinth . .

2 3

Rounded

front edge

Dieses Handbuch passt für folgende Modelle

Andere Argos Inneneinrichtung Handbücher

Argos

Argos Atlas Bedienungsanleitung

Argos

Argos Jenson 937/4610 Bedienungsanleitung

Argos

Argos Mix Bedienungsanleitung

Argos

Argos OI WOW Eclipse 147/9726 Bedienungsanleitung

Argos

Argos Walton 166/2629 Bedienungsanleitung

Argos

Argos Belle HOME 879/0240 Bedienungsanleitung

Argos

Argos Misaki 632/4546 Bedienungsanleitung

Argos

Argos Arizona 461/6366 Bedienungsanleitung

Argos

Argos Phoenix 719/3147 Bedienungsanleitung

Argos

Argos 343/3980 Bedienungsanleitung

Argos

Argos New Penton 258/7129 Bedienungsanleitung

Argos

Argos 875/2886 Bedienungsanleitung

Argos

Argos OXFORD DINING FURNITURE Produktinformationsblatt

Argos

Argos Arizona 541/9517 Bedienungsanleitung

Argos

Argos HOME 797/1699 Bedienungsanleitung

Argos

Argos 609/0131 Bedienungsanleitung

Argos

Argos Zest 245/7558 Bedienungsanleitung

Argos

Argos Cube Coffee Table Bedienungsanleitung

Argos

Argos 875/5429 Bedienungsanleitung

Argos

Argos Chequer 399/901 Bedienungsanleitung

Argos

Argos Home Jenson 926/9567 Bedienungsanleitung

Argos

Argos New Penton Bedienungsanleitung

Argos

Argos 237/9430 Bedienungsanleitung

Argos

Argos Atlas 161/5803 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung