Argos Malibu 259/7937 Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

Width - 75cm

Depth - 40cm

Height - 41cm

Malibu - Media Unit

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 3 - 04/09/14

Important - Please read these instructions fully before starting assembly

ALR3036

259/7937

238/3172

228/8284

259/8967

275/3953

278/5079

iSSUE 2 - 19/03/14 - All panel codes have been updated.

Drawer Sides now 370 x 124mm.

Drawer Back now 676 x 124mm.

Drawer Base now 687 x 367mm.

Changed runners to metal sliders, added 4 Wedgefixes, 4 Plastinails, 4 Skinny Euros and 2 M4x9 Machine Screws.

Plinth has been moved back.

Issue 3 - 03/09/14 - Changed Drawer Back description to W676-124BCK.

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 15.5kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: If there is any

chance of this unit being pulled

over by children etc. it is

recommended that the unit is

secured to a wall using suitable

fixings (not supplied).

• Dispose of all packaging

carefully and responsibly.

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note: If required the next page

can be cut out and used as

reference throughout the

assembly. Keep this page with

these instructions for future

reference.

Components - Panels

Please check you have all the panels listed below

12 3

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Divider (D2866A)

(92 x 372mm)

7 8 9

Drawer Base (T687-367)

(687 x 367mm)

Back (X568-318)

(568 x 318mm)

Drawer Back (W676-124BCK)

(676 x 124mm)

Left Drawer Side

(W370-124LH)

(370 x 124mm)

Right Drawer Side

(W370-124RH)

(370 x 124mm)

Top (D2863A)

(747 x 396mm)

Horizontal (D2867A)

(708 x 373mm)

Rail (D2868A)

(708 x 92mm) x 3

Drawer Front (D2869A)

(704 x 190mm)

Left Side (D2864A)

(396 x 394mm)

Right Side (D2565A)

(396 x 394mm)

Please check you have all the fittings listed below

Tools required

Glue Safety - Take care when using glue, please follow the advice below

Skin contact: Remove contami-

nation by washing with soap and

water. This procedure should be

followed prior to aeting and

drinking.

Eye contact: Rinse immediately

with clean water for 15 minutes

and seek medical advice.

If swallowed: Seek medical

advice immediately.

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

• From time to time check that

there are no loose screws on

this unit.

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Rule Scissors Hammer Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

Ruler - Use this ruler to help correctly identify the screws

Wooden dowel (F22) x 11

Metal dowel (F901) x 8

Large locking

nut (F900) x 6

Small locking

nut (F3) x 2

G H I

Nail (F51) x 12

25mm Screw (F50) x 2

Handle (F631) x 2

40mm Screw (F910) x 10

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

45mm Screw (F65) x 2

Wedgefix (F639) x 4

Knock-in Peg (F171GY) x 4

Drawer runner (F1004) x 2

9mm Screw (F74) x 2

9mm Screw (F73) x 4

Plastic Nail (F91) x 4

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Step 1

Prepare the drawer

front

Screw 2 metal dowels

into the drawer front .

Note: Tighten the metal

dowels up fully against

the panels.

Prepare the drawer

sides

Insert a small locking

nut into the hole

shown on the left drawer

side and right drawer

side .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Attach the drawer

sides to the drawer

front

Push the left drawer side

. and right drawer side

. onto the back of the

drawer front .

Turn the small locking

nuts on the left

drawer side and right

drawer side .

Note: Turn the locking

nuts clockwise to

secure panels - more

than 1/2 a turn.

Step 2

Step 3

Note: Due to the manufacturing process, the holes for the

locking nut can be on either surface of the drawer sides.

Note: The locking nuts can be on either surface of the drawer sides.

Make sure that the small groove is on the inside, as shown.

Assembly Instructions

Step 4

Fit the drawer base

Slide the drawer base

down the grooves in the

drawer sides and

and down into the

groove in the drawer

front .

Step 5

Fit the drawer back

between the drawer

sides and .

Make sure that the

drawer base fits into

the groove in the drawer

back .

Hold the drawer back

in position and tap the

knock-in pegs

through the holes in the

drawer sides and .

8 9

Step 6

Attach the handles

Attach the handles to

the drawer front

using 2 screws .

Fit the wedgefixes

Turn the drawer

assembly over and slide

4 wedgefixes into the

front and back grooves,

as shown, and tighten up

the screws.

Step 7

Note: Do not

overtighten the screws.

Assembly Instructions

Step 8

Finished

front edge

Finished

front edge

Finished

front edge

Prepare the left side

a: Place a runner on

the left side as

shown. Slide back the

top of runner and use the

2nd hole from the front

to fit the 1st screw .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the left side .

Insert 2 large locking

nuts into the left side

. .

Note: The arrow on the

locking nuts must point

towards the hole in the

edge of the panel.

Tap a wooden dowel

into the left side .

Note: Wooden dowels

must not stick out from

the edge by more than

10mm or they may

damage other panels.

Ja:

b: 10mm

Finished

front edge

Finished

front edge

Assembly Instructions

Step 9

Finished

front edge

Prepare the horizontal

Tap 2 wooden dowels

into the horizontal .

Step 10

plain chipboard surface

Finished

front edge

Fit the horizontal to

the right side

Push the horizontal

onto the right side

and secure with 2

screws .

plain chipboard surface

Step 11

Prepare the right side

a: Place a runner on

the right side as

shown. Slide back the

top of runner and use the

2nd hole from the front

to fit the 1st screw .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the right side .

Insert 2 large locking

nuts into the right

side .

Tap a wooden dowel

into the right side .

Finished

front edge

Assembly Instructions

Step 12

Step 13

Prepare the 3 rails

Tap 2 wooden dowels

into each of the 3 rails . .

Finished

front edge

plain chipboard surface

Fit the 3 rails to the

right side

Push the 3 rails onto

the right side and

secure with 3 screws .

Step 14

Fit the left side

Push the left side

onto the assembly and

secure with 5 screws .

Carefully stand the

unit up in preparartion

to fit the top.

Note: Support the rail at

the back of the unit until

the left side has been

fitted in the next step.

plain chipboard surface

Warning: The

unit is heavy.

Lift with care.

x 3

plain chipboard surface

Assembly Instructions

Step 15

Prepare the divider

Tap a wooden dowel

into the divider .

Insert 2 large locking

nuts into the divider

. .

Step 16

Fit the divider to the

top

Push the divider

onto the top .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the divider .

Note: Turn the large

locking nuts as far as

they will go - more than

1/2 a turn.

Step 17

plain chipboard surface

Finished

front edge

Prepare the top

Screw 6 metal dowels

into the top .

Finished

front edge

Finished

front edge

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Argos Inneneinrichtung Handbücher

Argos

Argos Tolga-22R Bedienungsanleitung

Argos

Argos Matrix 609/0722 Bedienungsanleitung

Argos

Argos Yani 606/9234 Bedienungsanleitung

Argos

Argos Marcell 4ft6 Frame Bedienungsanleitung

Argos

Argos Malvern 604/0105 Bedienungsanleitung

Argos

Argos Montana 412/3653 Bedienungsanleitung

Argos

Argos 237/9430 Bedienungsanleitung

Argos

Argos 758/5401 Bedienungsanleitung

Argos

Argos Wow 481/8401 Bedienungsanleitung

Argos

Argos hygena 617/5599 Bedienungsanleitung

Argos

Argos 875/5694 Bedienungsanleitung

Argos

Argos Wow Pine Kitchen Trolley 424/6963 Bedienungsanleitung

Argos

Argos Chicago Dining Set Bench Bedienungsanleitung

Argos

Argos PHOENIX 425/7079 Bedienungsanleitung

Argos

Argos Henley 428/0369 Bedienungsanleitung

Argos

Argos 558/8228 Bedienungsanleitung

Argos

Argos 8146643 Bedienungsanleitung

Argos

Argos TC NEW PAOLO 5554001 Bedienungsanleitung

Argos

Argos Tolga 460/4378 Bedienungsanleitung

Argos

Argos Santos Recliner Chair And Foot stool Bedienungsanleitung

Argos

Argos Savannah 602/5326 Bedienungsanleitung

Argos

Argos SAVANNA 476/9086 Bedienungsanleitung

Argos

Argos Tolga 323/6132 Bedienungsanleitung

Argos

Argos hygena Hamlin 143/4235 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung