Argos Malibu 630/3165 Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

Width - 75cm

Depth - 40cm

Height - 109cm

Malibu - 5+2 Drawer Chest

Assembly Instructions - Please keep for future reference 630/3165

630/3206

630/3172

630/3189

630/3196

709/0226

709/0154

719/3460

719/3453

630/3213

630/3237

143/9261

144/3288

152/6095

157/8665

152/5759

159/7093

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 5 - 10/10/13

Important - Please read these instructions fully before starting assembly

Ruler - Use this ruler to help correctly identify the screws

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

ALR2440

Issue 2 - 29/03/11 - Added Argos Codes 719/1682 and 719/1668

Issue 4 - 10/04/13 - Added Argos Codes 719/3460 and 719/3453

Issue3 - 02/05/11 - Incorrect Argos Codes 719/1682 & 719/1668 have been replaced with correct codes of 709/0226 & 709/0154.

Issue 5 - 10/10/13 - 6 new Argos codes added

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 31kgs. Please lift

with care.

• Check you have all the

components and tools listed on

pages 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

• Parts of the assembly will be

easier with 2 people.

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: It is

recommended that this unit is

secured to a wall using the

bracket supplied.

• Dispose of all packaging

carefully and responsibly.

Glue Safety - Take care when using glue, please follow the advice below

Skin contact: Remove contami-

nation by washing with soap and

water. This procedure should be

followed prior to aeting and

drinking.

Eye contact: Rinse immediately

with clean water for 15 minutes

and seek medical advice.

If swallowed: Seek medical

advice immediately.

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

• From time to time check that

there are no loose screws on

this unit.

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note: If required the next page

can be cut out and used as

reference throughout the

assembly. Keep this page with

these instructions for future

reference.

Plinth - D0118A

714 x 92mm

Rail - D0119A

714 x 66mm

Back Rail - D0120A

714 x 60mm

Components - Panels

Please check you have all the panels listed below

Glue Safety - Take care when using glue, please follow the advice below

Skin contact: Remove contami-

nation by washing with soap and

water. This procedure should be

followed prior to aeting and

drinking.

Eye contact: Rinse immediately

with clean water for 15 minutes

and seek medical advice.

If swallowed: Seek medical

advice immediately.

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

• From time to time check that

there are no loose screws on

this unit.

Left Side (D0226A)

(1071 x 394mm)

Drawer Divider - D0034A

145 x 249mm

waterfall

Small Left

Drawer Front

(D0122A) (353 x 157mm)

4Small Right

Drawer Front

(D0123A) (353 x 157mm)

Right Side (D0227A)

(1071 x 394mm)

80% Top (D0116A)

(747 x 396mm)

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Divider (D0117A)

(160 x 238mm)

Rail (D0121A)

(714 x 72mm)

Plinth (D0118A)

(714 x 92mm)

Back Rail (D0120A) x 2

(714 x 60mm)

Large Drawer Front (D0131A) x 5

(710 x 157mm)

Small Drawer Base x 2

(T161) (299 x 330mm)

Foldy Back (X166)

(517 x 738mm)

Large Drawer Base x 5

(T162) (299 x 695mm)

Small Drawer Wrap x 2 (W161)

(943 x 95mm)

Large Drawer Wrap x 5 (W162)

(1308 x 95mm)

Please check you have all the fittings listed below

Tools required

Glue Safety - Take care when using glue, please follow the advice below

Skin contact: Remove contami-

nation by washing with soap and

water. This procedure should be

followed prior to aeting and

drinking.

Eye contact: Rinse immediately

with clean water for 15 minutes

and seek medical advice.

If swallowed: Seek medical

advice immediately.

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

• From time to time check that

there are no loose screws on

this unit.

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Wooden dowel (F22) x 13

Metal dowel (F901) x 18

Nail holder (F149) x 1

Large locking

nut (F900) x 4

Small locking

nut (F3) x 14

40mm Screw (F910) x 6

13mm Screw (F79) x 1

25mm Screw (F50) x 12 Handle (F631) x 12

Rule Scissors Hammer Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

Nail (F51) x 22

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Bracket (F327) x 1

R (F601)

L (F600)

F599

Drawer stops (F599) x 14

Runners (F600) x 7 and (F601) x 7

Electric drill

(only use when

drilling into walls)

Assembly Instructions

Prepare small drawer

fronts and wraps x 2

Note: The small right

drawer front has a

small identification

hole.

a: Screw 2 x metal

dowels into the holes

on the back of the small

drawer fronts and .

Note: Tighten metal

dowels up fully against

the panels.

b: Insert 2 small locking

nuts into the holes

shown on the drawer

wrap .

Note: Arrow on locking

nut must point towards

hole in edge of panel.

4 5

Assemble small

drawers x 2

a: Place small drawer

base into the narrow

slot on the small drawer

wrap . Fold wrap

around the base.

b: Turn each of the

drawer wrap assemblies

over and push onto the

back of the small drawer

fronts and .

Turn locking nuts

clockwise to secure

panels - more than 1/2 a

turn.

4 5

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

90%

Identification

hole

and

4 5

Step 1

Step 2

plain surface

Note: Due to the manufacturing process, the holes for the

locking nut can be on either surface of the drawer sides.

Note: The locking nuts can

be on either surface of the

drawer sides.

Note: Due to the manufacturing process, the holes for the

locking nut can be on either surface of the drawer sides.

Note: The locking nuts can

be on either surface of the

drawer sides.

Assembly Instructions

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

Rebated Edge

F73

COVERED EDGE

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

F1004

When you insert F900,

make sure the arrow is

pointing towards the hole

in the edge of the panel.

F900

F73

F1004

COVERED EDGE

Push drawer stops

into small drawer

wraps x 2

Carefully break off the 2

drawer stops (F599) from

each pair of the drawer

runners .

Push the drawer stops

fully through the small

drawer wraps from

the inside.

SNAP!

F599

Attach handles x 2

Attach handle to the

drawer fronts using

screw .

Note: Do not

overtighten the screw.

F599

Step 3

Step 4

Assembly Instructions

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

Rebated Edge

F73

COVERED EDGE

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

F1004

When you insert F900,

make sure the arrow is

pointing towards the hole

in the edge of the panel.

F900

F73

F1004

COVERED EDGE

Step 1

Prepare large drawer

fronts and wraps x 5

a: Screw 2 x metal

dowels into the holes

on the back of the large

drawer fronts .

Note: Tighten metal

dowels up fully against

the panels.

b: Insert 2 small locking

nuts into the holes

shown on the large

drawer wrap .

Note: Arrow on locking

nut must point towards

hole in edge of panel.

Assemble large

drawers x 5

a: Place large drawer

base into the narrow

slot on the large drawer

wrap . Fold wrap

around the base.

b: Turn each of the

drawer wrap assemblies

over and push onto the

back of the large drawer

fronts .

Note: Turn locking

nuts clockwise to

secure panels - more

than 1/2 a turn.

Step 5

Step 6

plain surface

Note: Due to the manufacturing

process, the holes for the locking

nut can be on either surface of the

drawer sides.

Note: The locking nuts can

be on either surface of the

drawer sides.

Assembly Instructions

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

Rebated Edge

F73

COVERED EDGE

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

F1004

When you insert F900,

make sure the arrow is

pointing towards the hole

in the edge of the panel.

F900

F73

F1004

COVERED EDGE

Push drawer stops

into large drawer

wraps x 5

Carefully break off the 2

drawer stops (F599) from

each pair of the drawer

runners .

Push the drawer stops

fully through the large

drawer wraps from

the inside.

SNAP!

Attach handles x 10

Attach handles to the

large drawer fronts using

screws .

Note: Do not

overtighten the screws.

F599

Step 7

Step 8

Assembly Instructions

Prepare left and right

side

Separate runners .

a: Push fit 6 x left

runners marked ‘L’

into the holes shown on

left side .

Note: Runners must be

be fitted flat against the

panel. If necessary

gently tap into final

position.

Insert large locking

nut as shown.

Note: Arrow on locking

nut must point towards

hole in edge of

panel.

Tap in wooden dowel

as shown.

Note: Wooden dowels

must not stick out from

the edge by more than

10mm or they may

damage other panels.

b: Push fit 6 x right

runners marked ‘R’

into the holes shown on

right side .

Insert large locking

nut as shown.

Tap in wooden dowel

as shown.

10mm

F600

Finished

front edge

Finished

front edge

LEA

F601

Step 9

Assembly Instructions

Step 10

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

Rebated Edge

F73

COVERED EDGE

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

F1004

When you insert F900,

make sure the arrow is

pointing towards the hole

in the edge of the panel.

F900

F73

F1004

COVERED EDGE

Finished front edge

Prepare rail, plinth

and back rails

a: Tap 4 x wooden

dowels into the ends

of the rail .

b: Tap 2 x wooden

dowels into the ends

of the plinth .

c: Tap 2 x wooden

dowels into the ends

of the 2 back rails .

Note: The colour of the

back rails may differ

from the main unit colour

or may be plain

chipboard.

Fit rail to the right

side

Attach rail to the right

side using the

dowels already fitted.

Finished front edge

Plain chipboard

surface

80%

Step 11

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Argos Inneneinrichtung Handbücher

Argos

Argos 481/3640 Bedienungsanleitung

Argos

Argos Misaki 632/4546 Bedienungsanleitung

Argos

Argos Small Mustard Fabric Ottoman 716/5467 Bedienungsanleitung

Argos

Argos White Media Storage Unit With Glass Doors... Bedienungsanleitung

Argos

Argos 617/3113 Bedienungsanleitung

Argos

Argos 603/4135 Bedienungsanleitung

Argos

Argos 739/0146 Bedienungsanleitung

Argos

Argos Ottawa 194803 Bedienungsanleitung

Argos

Argos Napoli 600/6259 Bedienungsanleitung

Argos

Argos Atlantic 651/1548 Bedienungsanleitung

Argos

Argos Osaka 2283935 Bedienungsanleitung

Argos

Argos 343761 Bedienungsanleitung

Argos

Argos Montana 412/4621 Bedienungsanleitung

Argos

Argos Peru 891869 Bedienungsanleitung

Argos

Argos Flexa 3395884 Bedienungsanleitung

Argos

Argos Home 2FT6 Josie 404/9373 Bedienungsanleitung

Argos

Argos Habitat AVR Wooden Barstool 600/5779 Bedienungsanleitung

Argos

Argos 258/3312 Bedienungsanleitung

Argos

Argos Harrington Bedienungsanleitung

Argos

Argos MADRID SPRING CUSHION CHAIR 6187862 Bedienungsanleitung

Argos

Argos Jenson 930/7450 Bedienungsanleitung

Argos

Argos Chrome Tidy Rail 875/8457 Bedienungsanleitung

Argos

Argos Atlas Bedienungsanleitung

Argos

Argos Arizona 541/9517 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung