Argos Stirling Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

Stirling - 2 Drawer 3 Door Mirrored Robe

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 1 - 11/11/14

Important - Please read these instructions fully before starting assembly

ALR3107

339/3130

330/9409

Width - 106.5cm

Depth - 49cm

Height - 189cm

Can you change the title to include the mirror please.

Also the mirror door needs including on the AI.

Components

V should be x4 handles

G should be x4 screws

Step 4+5 – Remove the word large from drawer assembly.

Step 25 – Hinges are O

Glass warning to be added to Ai.

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 74kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: It is

recommended that this unit is

secured to a wall using the

bracket supplied.

• Dispose of all packaging

carefully and responsibly.

Drawer Front (D3026A)

(510 x 245mm) x 2

Drawer Back (W457-195)

(457 x 195mm) x 2

Left Drawer Side (W370-195LH)

(370 x 195mm) x 2

Drawer Base (T468-367)

(468 x 367mm) x 2

Right Drawer Side (W370-195RH)

(370 x 195mm) x 2

Components - Panels

Please check you have all the panels listed below

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

1 2 3

Tools required

Rule

Square

Spirit level

Scissors

Bradawl

Hammer

Cross-head screwdriver

Step ladder

Eye protection

(when using a

hammer or drill)

Electric drill

(do not use for

fitting screws)

Components - Panels

Please check you have all the panels listed below

80%

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Upright (D3022A)

(1549.5 x 453mm)

Small Back Rail (D3027A)

(330 x 123mm)

Top (D3021A)

(1063 x 490mm)

Base (D3023B)

(106.5 x 490mm)

Horizontal (D3024A)

(1004 x 456mm)

Small Back (X1836-349)

(1836 x 349mm)

Large Back (X1836-677)

(1836 x 677mm)

Left Side (D3016A)

(1810 x 457mm)

Right Side (D3017A)

(1810 x 457mm)

2019

Small Hanging

Rail (FHR322)

(322mm long)

Large Hanging

Rail (FHR651)

(651mm long)

Door (D3019A)

(1553 x 339mm) x 2

Large Back Rail (D3020A)

(659 x 123mm)

Divider (D3025A)

(245.5 x 452mm)

Mirror Door (D3019MA)

(1553 x 339mm)

(Mirror - SG28

1513 x 301mm

Safety Back SAR)

Please check you have all the fittings listed below

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110

A B

Metal dowel (F901) x 8

D E F

J K

Knock-in Peg (F171GY) x 8

9mm Screw (F73) x 8

38mm Screw (F81) x 4 13mm Screw (F63) x 22

Drawer runner (F1004) x 4

9mm Screw (F74) x 4

40mm Screw (F910) x 23

Wooden dowel (F22) x 2 Small locking nut

(F3) x 4

Rail holder

(F1014) x 4

Hinge plate (F523) x 9 Hinge (F518) x 9

Large locking

nut (F900) x 6

Double metal dowel (F566) x 1 Nail screw (F277) x 5 Back holder (F276) x 5

*These can also be round

Wedgefix (F639) x 4

Handle (F463) x 4

Large wooden dowel (F40) x 1

Nail x (F51) x 38

WStrap Screw Washer x 2

Overbalance protector kit (F269) x 1

Foot (F340) x 5

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Step 1

Step 2

Prepare the 2 drawer

fronts

Screw 2 metal dowels

into each of the drawer

fronts .

Note: Tighten the metal

dowels up fully against

the panels.

Prepare the drawer

sides

Insert a small locking

nut into the hole

shown on the left drawer

side and the right

drawer side .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Step 3

Attach the drawer

sides to the drawer

fronts

Push the left drawer side

. and right drawer side

. onto the back of the

drawer front .

Turn the small locking

nuts on the left

drawer side and right

drawer side .

Note: Turn the locking

nuts clockwise to

secure panels - more

than 1/2 a turn.

x 2

x 2 x 2

x 2

Assembly Instructions

Step 4

Fit the drawer bases

Slide the drawer base

down the grooves in the

drawer sides and

and down into the

groove in the drawer

front .

Step 5

Fit the drawer back

between the drawer

sides and .

Make sure that the

drawer base fits into

the groove in the drawer

back .

Hold the drawer back

in position and tap the

knock-in pegs

through the holes in the

drawer sides and .

2 3

Attach the handles

Attach a handle to

each drawer front

using screw .

Step 6

2 3

Step 7

Fit the wedgefixes

Turn the 2 drawer

assemblies over and

slide 2 wedgefixes

into the front and back

grooves, as shown, and

tighten up the screws.

x 2

Finished

front edge

Assembly Instructions

Step 8

Finished

front edge

Prepare the left side

a: Fit 3 hinge plates

to the left side

making sure that the slot

is facing towards the

finished front edge.

Push a rail holder into

the left side . Make

sure that it is fitted

straight, in line with the

panel edges and then

secure with screw .

Place a runner onto

the left side . Slide

back the top of runner

and use the 2nd hole

from the front to fit the

1st screw .

Screw a metal dowel

into the left side .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the left side .

Finished

front edge

Assembly Instructions

Step 9

Finished

front edge

Prepare the right side

a: Fit 3 hinge plates

to the right side

making sure that the slot

is facing towards the

finished front edge.

Push a rail holder into

the right side . Make

sure that it is fitted

straight, in line with the

panel edges and then

secure with screw .

Place a runner onto

the right side . Slide

back the top of runner

and use the 2nd hole

from the front to fit the

1st screw .

Screw a metal dowel

into the right side .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the right side .

Finished

front edge

Finished

front edge

Assembly Instructions

Step 10

Polystyrene

block

Polystyrene

block

Fit the top to the sides

Attach the top to the

left side and right

side using 4 screws

. .

Note: To make it easier

to fit the top and base

panels, place

polystyrene blocks from

the packaging

underneath the side

panels to raise the

assembly.

Polystyrene

block

Polystyrene

block

Step 11

Finished

top edge

Prepare the small

back rail

Insert 2 large locking

nuts into the small

back rail .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Tap a wooden dowel

into the small back rail

. .

Note: Wooden dowels

must not stick out from

the edge by more than

10mm or they may

damage other panels.

Plain chipboard

surface

10mm

Assembly Instructions

Step 12

Finished

front edge

Prepare the upright

a: Fit 3 hinge plates

to the upright making

sure that the slot is

facing towards the

finished front edge.

Push a rail holder into

the upright . Make

sure that it is fitted

straight, in line with the

panel edges and then

secure with screw .

Turn the upright over

b: Push a rail holder

into the upright .

Make sure that it is fitted

straight, in line with the

panel edges and then

secure with screw .

Turn the

upright over

Finished

front edge

Dieses Handbuch passt für folgende Modelle

Andere Argos Inneneinrichtung Handbücher

Argos

Argos Alto hygena 404/3733 Datenblatt

Argos

Argos Nest of Tables 609/1439 Bedienungsanleitung

Argos

Argos Modular Bedienungsanleitung

Argos

Argos 900/2566 Bedienungsanleitung

Argos

Argos Belle HOME 886/8763 Bedienungsanleitung

Argos

Argos Dalton Metal 3ft Frame 656/9624 Bedienungsanleitung

Argos

Argos Amelie 247/9873 Bedienungsanleitung

Argos

Argos 314/2769 Bedienungsanleitung

Argos

Argos Foley 333/7976 Datenblatt

Argos

Argos 2463834 Bedienungsanleitung

Argos

Argos Hygena Genoa 464/2718D Bedienungsanleitung

Argos

Argos Suki 609/7426 Bedienungsanleitung

Argos

Argos Henley End Table 614/3150 Bedienungsanleitung

Argos

Argos 617/3113 Bedienungsanleitung

Argos

Argos hygena 385/9715 Datenblatt

Argos

Argos Home 615/1795 Bedienungsanleitung

Argos

Argos Iceland 279721 Bedienungsanleitung

Argos

Argos Tolga 03R 462/6071 Bedienungsanleitung

Argos

Argos Malvern 395/6632 Bedienungsanleitung

Argos

Argos 2687249 Bedienungsanleitung

Argos

Argos 389/6039 Bedienungsanleitung

Argos

Argos Normandy 428/2611 Bedienungsanleitung

Argos

Argos Hallingford 305/2811 Bedienungsanleitung

Argos

Argos Venice Sideboard Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung