Argos Zest 267/8454 Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

Width - 77.5cm

Depth - 40cm

Height - 82cm

Zest - Media Unit

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 4 - 13/10/14

Important - Please read these instructions fully before starting assembly

ALR3044

267/8454

Issue 2 - 02/07/14 - Cat Code changed to 267/8454.

Base panel size changed to 775 x 395mm.

Screws for the feet changed to F81 (SC2800).

Amended the assembly so that the base panel is now fitted before the feet.

Issue 3 - 02/10/14 - Range name changed to Zest

Issue 4 - 13/10/14 - Drawer Back is now 693 x 124mm.

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 30kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 1, 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note: If required the next page

can be cut out and used as

reference throughout the

assembly. Keep this page with

these instructions for future

reference.

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: It is

recommended that this unit is

secured to a wall using the

bracket supplied.

• Dispose of all packaging

carefully and responsibly.

Tools required

Rule Scissors Hammer

Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

Electric drill

(do not use for

fitting screws)

Components - Panels

Please check you have all the panels listed below

80%

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

1 2

Back (X791-769)

(791 x 769mm)

Left Drawer Side

(W370-124LH)

(370 x 124mm) x 2

Right Drawer Side

(W370-124RH)

(370 x 124mm) x 2

12 13 14

Left Side (D2960A)

(765 x 395mm)

Right Side (D2961A)

(765 x 395mm)

5Horizontal (D2980A)

(741 x 394mm)

6Top (D2959A)

(775 x 396mm)

8Drawer Front (D2956A)

(753 x 192mm) x 2

Loose Shelf

(D2964A)

(362 x 392mm)

Upright (D2962A)

(375 x 393mm)

Drawer Back (W693-124)

(693 x 124mm) x 2

Door (D2965A)

(387 x 375mm)

Drawer Base (T702-367)

(700 x 367mm) x 2

Base (D2955A)

(775 x 395mm)

Please check you have all the fittings listed below

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

A B C

G H I

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Wedgefix (F639) x 8

13mm Screw (F63) x 1613mm Screw (F52) x 12

40mm Screw (F910) x 6

Metal dowel (F901) x 14 Large locking

nut (F900) x 10

Small locking

nut (F3) x 4

Bracket (F327) x 1

13mm Screw (F79) x 1

Foot

(F233) x 4

Knock-in Peg (F171GY) x 8

Shelf stud (F110) x 4

SR Runner (F160) x 2

L Runner (F161) x 2

L Runner (F159) x 2

R Runner (F162) x 2

350mm long

Hinge Plate

(F521) x 2 Hinge (F520) x 2

Nail (F51) x 20

32mm Screw (F72) x 5

38mm Screw (F81) x 8

Handle (F894GRN) x 5

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Step 1

x 2

Note: Due to the manufacturing process, the holes for the

locking nut can be on either surface of the drawer sides.

Note: The locking nuts can be on either surface of the drawer sides.

Make sure that the small groove is on the inside, as shown.

910

Step 2

Prepare the 2 drawer

fronts

Screw 2 metal dowels

into each of the 2 drawer

fronts .

Note: Tighten the metal

dowels up fully against

the panels.

Prepare the drawer

sides

Insert a small locking

nut into the hole

shown on the left drawer

side and the right

drawer side .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Step 3

Attach the drawer

sides to the drawer

fronts

Push the left drawer sides

. and right drawer sides

. onto the back of the

drawer fronts .

Turn the small locking

nuts on the left

drawer side and right

drawer side .

Note: Turn the locking

nuts clockwise to

secure panels - more

than 1/2 a turn.

10 9

Assembly Instructions

Step 4

Fit the drawer base

Slide the drawer base

down the grooves in the

drawer sides and

and down into the

groove in the drawer

front .

Step 5

Fit the drawer back

between the drawer

sides and .

Make sure that the

drawer base fits into

the groove in the drawer

back .

Hold the drawer back

in position and tap the

knock-in pegs

through the holes in the

drawer sides and .

Step 6

9 10

Attach the handles

Attach 2 handles to

each of the drawer fronts

. using screws .

Note: Do not

overtighten the screw.

9 10

x 2

Assembly Instructions

Step 7

Fit the wedgefixes

Turn the drawer

assemblies over and

slide 4 wedgefixes

into the front and back

grooves, as shown, and

tighten up the screws.

x 2

Step 8

S d

Fit runners to the

drawers

Fit the runner to the

bottom edge of the left

drawer side , as

shown, making sure that

it is pushed up against

the back of the drawer

front . Use a bradawl

to mark the fixing

positions, then secure

with 2 screws .

Fit the runner to the

bottom edge of the right

drawer side using the

same method.

S c

S d

Runners must be

pushed up against

the drawer front

S c

Assembly Instructions

Step 9

S b

Finished front edge

G1st

screw

2nd

screw

G3rd

screw

S b

Finished front edge

Prepare the right side

Screw 2 metal dowels

into the right side .

Insert 2 large locking

nuts into the right

side . .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Fit 2 hinge plates to

the right side making

sure that the slot is

facing towards the

finished front edge.

Fit 2 runners to the

right side .

The 1st screw uses

the 2nd hole in from the

front of the runner.

The 2nd and 3rd screws

. use the holes that line

up with the other panel

holes.

Fit a screw into the

2nd hole in at the top of

the runner .

S b

Step 10

Prepare the horizontal

Insert 4 large locking

nuts into the

horizontal .

S b

Green

edge

Green

edge

Assembly Instructions

Step 11

Step 12

Fit the horizontal to

the right side

Push the horizontal

onto the right side .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the horizontal .

Note: Turn the large

locking nuts as far as

they will go - more than

1/2 a turn.

Prepare the left side

Screw 2 metal dowels

into the left side .

Insert 2 large locking

nuts into the left side

. .

Fit 2 runners to the

left side .

The 1st screw uses

the 2nd hole in from the

front of the runner.

The 2nd and 3rd screws

. use the holes that line

up with the other panel

holes.

Fit a screw into the

2nd hole in at the top of

the runner .

S a

Finished front edge

1st

screw

2nd

screw

3rd

screw

S a

Finished front edge

S a

Green

edge Green

edge

Green

edge

Assembly Instructions

Step 13

Step 14

Fit the left side

Push the left side

onto the horizontal .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the horizontal .

Prepare the upright

Insert 2 large locking

nuts into the upright

. .

Step 15

Fit the upright

Fit the upright onto

the horizontal using 2

screws .

Green

edge

Green

edge

Green

edge

Step 8 – Turning over the drawer assembly is not required to fit the runners, as already the correct way on the previous step.

Step 13 – do you need to add B to the diagram to show position of Lge locking nuts?

Inhaltsverzeichnis

Andere Argos Inneneinrichtung Handbücher

Argos

Argos Tolga 497/2309 Bedienungsanleitung

Argos

Argos Malibu Double Cupboard MK2 Bedienungsanleitung

Argos

Argos Princess Dining Chair 398/1298 Bedienungsanleitung

Argos

Argos 600/3575 Bedienungsanleitung

Argos

Argos Sasha End Table Kurzanleitung

Argos

Argos 2 Door Media Unit/Low Sideboard 482/0437 Bedienungsanleitung

Argos

Argos 338/7005 Bedienungsanleitung

Argos

Argos 481/3640 Bedienungsanleitung

Argos

Argos 3FT Josie 436/9730 Bedienungsanleitung

Argos

Argos 464/4084 Bedienungsanleitung

Argos

Argos Slatted 2 Door Cabinet 170/3179 Bedienungsanleitung

Argos

Argos 875/4860 Bedienungsanleitung

Argos

Argos Stratford White Bedienungsanleitung

Argos

Argos 548/5259 Bedienungsanleitung

Argos

Argos 875/5694 Bedienungsanleitung

Argos

Argos Adult Malibu 532/8038 Bedienungsanleitung

Argos

Argos Kensington Installationsanleitung

Argos

Argos Vancouver II 643/8157 Bedienungsanleitung

Argos

Argos EMPEROR 6031561 Bedienungsanleitung

Argos

Argos Venetia 630/3505 Bedienungsanleitung

Argos

Argos Malibu 305/1764 Bedienungsanleitung

Argos

Argos OXFORD DINING FURNITURE Produktinformationsblatt

Argos

Argos 932/7722 Bedienungsanleitung

Argos

Argos Iceland 279721 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung