Ariel Rider KEPLER Bedienungsanleitung
!
KEPLER!
USER MANUAL
Thank you for purchasing the Kepler from Ariel Rider EbikesTM.
We take pride in bringing you a quality product that will offer years of
enjoyment. Please read and understand this manual fully before
assembling and riding your bike.
If you have questions after reading this manual, please reference the
Ariel Rider Ebikes Help Center, contact us by email, and/or give us a call
on the phone.
We’re here to help!
Ariel Rider Ebikes Help Center: arielrider.zendesk.com/hc/en-us
Or contact us from:
info@arielrider.com!
!
"
Using This Manual
!
This manual contains details of the product, its equipment, and information on
operation, maintenance, and other helpful tips for owners. Read it carefully and
familiarize yourself with the Kepler before using it to ensure safe use and prevent
accidents.Be sure to retain this manual as your convenient Kepler information
source. !
!
This manual contains many warnings and cautions concerning the safe operation
and consequences if proper setup, operation, and maintenance are not performed.
All information in this manual should be carefully reviewed and if you have any
questions you should contact Ariel Rider E-bikes immediately. The notes,
warnings, and cautions contained within the manual and marked by the triangular
Caution Symbol at the right of this page should also be given special care. Users
should also pay special attention to information marked in this manual beginning
with an exclamation mark as below:
#
NOTICE!
Because it is impossible to anticipate every situation or condition which can occur while
riding, this manual makes no representations about the safe use of bikes under all
conditions. There are risks associated with the use of any bike which cannot be
predicted or avoided, and which are the sole responsibility of the rider. You should keep
this manual, along with any other documents that were included with your bike, for
future reference, however all content in this manual is subject to change or withdrawal
without notice. Ariel Rider E-bikes makes every effort to ensure accuracy of its
documentation and assumes no responsibility of liability if any errors or inaccuracies
appear within. Assembly and first adjustment of your bike from Ariel Rider E-bikes
requires special tools and skills and it is recommended that this should be done by a
certified, reputable bike mechanic if possible.
In no event shall Ariel Rider be liable for any direct, indirect, punitive, incidental, special
consequential damages, to property or life, including but not limited to physical injury,
mental injury, loss of income, monetary damages, and injury to a third party, whatsoever
arising out of or connected with the use or misuse of Ariel Rider products. No claims,
representations, or warranties, whether express or implied, including but not limited to
$
warranties of merchantability, fitness for a particular purpose, of title, or of non-
infringement of third-party rights, are made by Ariel Rider as to the safety, reliability,
durability, and performance of any of Ariel Rider’s products. This includes any third party
contracting You may do related to the use, repair, or unauthorized modification of Ariel
Rider products. Furthermore, Ariel Rider accepts no liability whatsoever for the safety,
reliability, durability, and performance of any of Ariel Rider’s products. By buying, using,
or allowing the use of Ariel Rider products, you represent and warrant that electronic
bicycles can be associated with a high level of risk and YOU EXPRESSLY AND
VOLUNTARILY ASSUME THE RISK OF DEATH OR OTHER PERSONAL INJURY
SUSTAINED WHILE USING ARIEL RIDER PRODUCTS, WHETHER OR NOT
CAUSED BY THE NEGLIGENCE OR OTHER FAULT OF ARIEL RIDER AS
DETERMINED BY A COURT OF COMPETENT JURISDICTION. Your use of the
product is entirely at Your own risk and you have no recourse whatsoever against Ariel
Rider.
%
Table of Contents
Using this Manual 2..............................................................................................................
General Info 6........................................................................................................................
Assembly Instructions 13....................................................................................................
Battery Charging 29..............................................................................................................
Operation 42..........................................................................................................................
Maintenance 75.....................................................................................................................
Troubleshooting 91...............................................................................................................
Warnings and Safety 94........................................................................................................
Limited Warranty 129............................................................................................................
&
General Info!
Assembly and Fit
"
Correct assembly and fit are essential elements of ensuring your bicycling
safety, performance, and comfort. Even if you have the experience, skill, and
tools to complete these essential steps before your first ride, Ariel Rider E-
bikes recommends having a certified, reputable bike mechanic check your
work.
NOTICE: If you do not have the experience, skill, and tools to complete assembly and
fit, Ariel Rider E-bikes highly recommends having a certified, reputable bike mechanic
complete these procedures as well as any future adjustments or tuning.
NOTICE: A critical aspect of assembling your bike from Ariel Rider E-bikes is securing the
front wheel and checking the tightness of the rear wheel axle nuts. Both wheels need to
be properly secured before operating your bike, and these nuts are to be checked every
45-50 miles.!
'
Mandatory Equipment and Use Locations
Before all rides, ensure you have all required and recommended safety
equipment and are following all laws pertaining to using an electric bike in your
region. For example, these laws may specify the need for mandatory equipment,
use of hand signals, and where you can ride.
Changing Components or Attaching Accessories
The use of non-original components or spare parts can jeopardize the
safety of your Kepler, void your warranty and, in some cases, cause your Kepler
to not conform with laws pertaining to your bike.
The replacement of original components or installation of third-party
accessories or accessories from Ariel Rider E-bikes not explicitly
recommended for your bike model, is at your own risk. Using aftermarket
accessories or components that have not been tested by Ariel Rider E-bikes
for safety and compatibility may void your warranty, create an unsafe riding
condition, damage your bike by Ariel Rider E-bikes, or result in serious injury
and/or death. Ariel Rider shall not be responsible for any and all injuries or
damages resulting from the use of non-original components or spare parts.!
(
Safety Check Before Each Ride"
Always check the condition of your bike before you ride in addition to having
regular maintenance performed. If you are unsure of how to conduct a complete check of
the condition of your bike before every ride, you should consult a certified, reputable bike
mechanic for assistance. See the Pre-Ride Safety Checklist for more information. Make
sure to check your motor cable is not hanging loose and/or rubbing any of the moving
parts. Failure to do so may end up damaging the motor cable which is not repairable,
and will result in needing to replace the motor itself, which is not covered under warranty.
Electrical System"
The electrical system on your Kepler offers various levels of power assistance
and lighting for different operating conditions and user preferences. It is critical that
you familiarize yourself with all aspects of your Kepler’s electrical system and check
to see that it is working correctly before every ride. The front and rear brake levers
contain safety power cutoff switches, which disable the hub motor’s assistance
when applied, and both levers should be checked for correct operation. The throttle
should provide smooth acceleration when gradually applied. If the throttle, brake
lever cutoff switches, pedal assistance, or lighting is not functioning normally,
Inhaltsverzeichnis
Andere Ariel Rider Fahrrad Handbücher
