7
Manual Armon Elemento Version 1.4 Date:August 2018
User maintenance:
The Armon Elemento does not require any particular maintenance except for cleaning.
Troubleshooting:
The Armon Elemento has been designed and manufactured using highly advanced technology and first class
components to ensure a reliable and efficient performance. However, should you meet with any
operational problems; it is recommended that you consult your local Armon Products distributor.
CAUTIONS:
•Only Armon Prodcts BV authorized technicians may carry out service on the internal parts of the
equipment.
•For repairs and further information, contact your local Armon Products dealer or authorised service
centre.
Installation:
The installation of the Armon Elemento should only be done by qualified and therefore trained specialists.
These specialists will receive a certificate after completing a training. To ensure the quality of the
installation and individually made brackets, their training and certificate should be updated on a yearly
bases. This is to ensure proper use and complete safety for the patient.
Safety:
•The arm support works with a spring compensation mechanism. Hence it gets the energy for the
compensation out of springs. When the upperarm of the arm support is down in any way, there
will be tension on the springs. When the arm support isn’t used, always bring the upper arm of the
arm support back into its most upwards position so that there is no tension on the springs.
•When getting the arm support out of a ‘parked’ postion, make sure the arm is placed properly in
the brace, and therefore the compensation force sufficiently compensated , before you start
moving the arm support out of its parked position.
•Always be aware of the tension of the springs when the upper arm is in a downwards position.
•The arm support may only be used for the proposed purpose. Any type of use which is not specified
in this manual, will be considered as improper use. The customer is solely responsible for material
damage and injury of persons resulting from improper use; Armon Products will not be liable
under any circumstance.
•Assembly, commissioning and maintenance should only be carried out by trained specialists.
•In any circumstance, do not open the housing of the arm support. Warranty is void in such case.
•Do not use the arm support in evironments exposed to corrosion hazards.
•Protect the arm support against sand, vapours and dust.
Liability:
To the maximum extent permitted by applicable law, in no event will Armon Products or its suppliers or
resellers be liable for any indirect, special, incidental or consequential damages arising from the use of or
inability to use the product, including, without limitation, damages for loss of goodwill, work and
productivity, computer failure or malfunction, or any and all other commercial damages or losses, even if
advised of the possibility thereof, and regardless of the legal or equitable theory (contract, tort or
otherwise) upon which the claim is based. In any case,
Armon Products’s entire liability under any provision of this agreement shall not exceed in the aggregate
the sum of the fees paid for this product and fees for support of the product received by Armon Products
under a separate support agreement (if any), with the exception of death or personal injury caused by the
