Arris Touchstone TM902 Bedienungsanleitung

Touchstone®T 902 Telephony odem

User’s Guide

Get ready to experience the nternet’s express lane! Whether you’re checking out

streaming media, downloading new software, checking your email, or talking with

friends on the phone, the Touchstone TM902 Telephony Modem brings it all to you

up to eight times faster than standard DOCS S 2.0 cable modems. All while pro-

viding toll quality Voice over P telephone service.

The Touchstone Telephony Modem provides an Ethernet connection for use with

either a single computer or home/ofﬁce Local Area Network (LAN). The Touchstone

Telephony Modem provides for up to two separate lines of telephone service.

nstallation is simple and your cable company will provide assistance to you for any

special requirements. The links below provide more detailed instructions.

Safety Requirements

Getting Started

nstalling and Connecting Your Telephony Modem

Conﬁguring Your Ethernet Connection

Using the Telephony Modem

Troubleshooting

Glossary

Export Regulations

This product may not be exported outside the U.S. and Canada without U.S. Department of Commerce, Bureau of Export Administration authorization. Any export or re-export by

the purchaser, directly or indirectly, in contravention of U.S. Export Administration Regulation is prohibited.

The information in this document is subject to change without notice. The statements, conﬁgurations, technical data, and recommendations in this document are believed to be

accurate and reliable, but are presented without express or implied warranty. Users must take full responsibility for their applications of any products speciﬁed in this document.

The information in this document is proprietary to ARR S.

ARR S, Touchstone, and the ARR S logo are trademarks or registered trademarks of ARR S. All other trademarks and registered trademarks are the property of their respective hold-

ers.

ARSVD01304

Release 9 Standard 1.1 June 2010

Touchstone® TM902 Telephony Modem User’s Guide

Export Regulations

Safety Requirements

FCC Part 15

European Compliance

Energy Consumption (TM902S Models only)

Getting Started

About Your New Telephony Modem

What’s in the Box?

What’s on the CD?

tems You Need

Getting Service

System Requirements

Recommended Hardware

Windows

MacOS

Linux/other Unix

About this Manual

Ethernet Connection

What About Security?

nstalling and Connecting Your Telephony Modem

Front Panel

TM902A/B/S Front Panel

Rear Panel

TM902A/B/S Rear Panel

Mounting the Telephony Modem

Tools and Materials

Location

nstructions

Wall-mounting instructions

Desktop mounting instructions

Connecting the Telephony Modem

Making Ethernet Connections

Making Telephone Connections

Conﬁguring Your Ethernet Connection

Requirements

How to use this chapter

TCP/ P Conﬁguration for Windows 2000

TCP/ P Conﬁguration for Windows XP

TCP/ P Conﬁguration for Windows Vista

TCP/ P Conﬁguration for Windows 7

TCP/ P Conﬁguration for MacOS X

Using the Telephony Modem

Setting up Your Computer to Use the Telephony Modem

Wiring Problems

ndicator Lights for the TM902A/B/S Models

ndicator Lights: Normal Operation

ndicator Lights: Startup Sequence

Cable Modem Start Up Sequence

Using the Reset Button

Troubleshooting

Glossary

Safety Requirements

ARR S Telephony Modems comply with the applicable requirements for perform-

ance, construction, labeling, and information when used as outlined below:

CAUTION

Risk of shock

Mains voltages inside this unit. No user serviceable parts inside. Refer

service to qualiﬁed personnel only!

CAUTION

Potential equipment damage

Potential loss of service

Connecting the Telephony Modem to existing telephone wiring should

only be performed by a professional installer. Physical connections to

the previous telephone provider must be removed and the wiring must

be checked; there must not be any voltages. Cancellation of telephone

service is not adequate. Failure to do so may result in loss of service

and/or permanent damage to the Telephony Modem.

• The Telephony Modem is designed to be connected directly to a telephone.

• Connecting the Telephony Modem to the home’s existing telephone wiring

should only be performed by a professional installer.

• Do not use product near water (i.e. wet basement, bathtub, sink or near a

swimming pool, etc.), to avoid risk of electrocution.

• Avoid using and/or connecting the equipment during an electrical storm, to

avoid risk of electrocution.

• Do not use the telephone to report a gas leak in the vicinity of the leak.

• Do not locate the equipment within 6 feet (1.9 m) of a ﬂame or ignition

source (i.e. heat registers, space heaters, ﬁreplaces, etc.).

• Use only power supply and power cord included with the equipment.

Touchstone TM902 Telephony Modem User’s Guide

Safety

Getting

Started Installation

Ethernet

Conﬁguration Usage Troubleshooting Glossary

• Equipment should be installed near the power outlet and should be easily

accessible.

• The shield of the coaxial cable must be connected to earth (grounded) at the

entrance to the building in accordance with applicable national electrical in-

stallation codes. n the U.S., this is required by NFPA 70 (National Electrical

Code) Article 820. n the European Union and in certain other countries,

CATV installation equipotential bonding requirements are speciﬁed in EC

60728-11, Cable netw rks f r televisi n signals, s und signals and interac-

tive services, Part 11: Safety. This equipment is intended to be installed in

accordance with the requirements of EC 60728-11 for safe operation.

f the equipment is to be installed in an area serviced by an T power line

network, as is found in many areas of Norway, special attention should be

given that the installation is in accordance with EC 60728-11, in particular

Annex B and Figure B.4.

• n areas of high surge events or poor grounding situations and areas prone

to lightning strikes, additional surge protection may be required (i.e.

PF11VNT3 from American Power Conversion) on the AC, RF, Ethernet and

Phone lines.

• When the Telephony Modem is connected to a local computer through Eth-

ernet cables, the computer must be properly grounded to the building/res-

idence AC ground network. All plug-in cards within the computer must be

properly installed and grounded to the computer frame per the manufac-

turer’s speciﬁcations.

• Ensure proper ventillation. Position the Telephony Modem so that air ﬂows

freely around it and the ventillation holes on the unit are not blocked.

• Do not mount the Telephony Modem on surfaces that are sensitive to heat

and/or which may be damaged by the heat generated by the modem, its

power supply, or other accessories.

Touchstone TM902 Telephony Modem User’s Guide

Safety

Getting

Started Installation

Ethernet

Conﬁguration Usage Troubleshooting Glossary

FCC Part 15

This equipment has been tested and found to comply with the requirements for a

Class B digital device under Part 15 of the Federal Communications Commission

(FCC) rules. These requirements are intended to provide reasonable protection

against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in ac-

cordance with the instructions, may cause harmful interference to radio communi-

cations. However, there is no guarantee that interference will not occur in a

particular installation. f this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the fol-

lowing measures:

• Reorient or relocate the receiving antenna.

• ncrease the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modiﬁcations to this equipment not expressly approved by the party re-

sponsible for compliance could void the user’s authority to operate the equipment.

Touchstone TM902 Telephony Modem User’s Guide

Safety

Getting

Started Installation

Ethernet

Conﬁguration Usage Troubleshooting Glossary

European Compliance

This product complies with the provisions of the Electromagnetic Compatibility

(EMC) Directive (89/336/EEC), the Amending Directive (92/31/EEC), the Low Volt-

age Directive (73/23/EEC), and the CE Marking Directive (93/68/EEC). As such,

this product bears the CE marking in accordance with the above applicable Direc-

tive(s).

A copy of the Declaration of Conformity may be obtained from: ARR S nterna-

tional, nc., 3871 Lakeﬁeld Drive, Suite 300, Suwanee, GA 30024.

As indicated by this symbol, disposal of this product is governed

by Directive 2002/96/EC of the European Parliament and of the

Council on waste electrical and electronic equipment (WEEE).

WEEE could potentially prove harmful to the environment; as

such, upon disposal of the Telephony Modem the Directive re-

quires that this product must not be disposed as unsorted mu-

nicipal waste, but rather collected separately and disposed of in

accordance with local WEEE ordinances.

This product complies with directive 2002/95/EC of the European Par-

liament and of the Council of 27 January 2003 on the restriction of the

use of certain hazardous substances (RoHS) in electrical and elec-

tronic equipment.

Touchstone TM902 Telephony Modem User’s Guide

Safety

Getting

Started Installation

Ethernet

Conﬁguration Usage Troubleshooting Glossary

Energy Consumption (T 902S odels only)

n accordance with Ecodesign Directive 2005/32/EC, this device is equipped with a

power switch. The following energy consumption ﬁgures apply (measured with a

wattmeter at the outlet):

Note: n most instances, ARR S recommends that the power switch remain in

the ON position at all times. Turning the switch OFF disables the device,

including both data service and telephone service. Turning the switch

OFF is recommended only during vacations or similar extended ab-

sences.

Switch State Power Consumption

OFF 0.0 W

ON 7.5 W (idle)

10.5 W (typical)

Touchstone TM902 Telephony Modem User’s Guide

Safety

Getting

Started Installation

Ethernet

Conﬁguration Usage Troubleshooting Glossary

Getting Started

About Your New Telephony odem

The Touchstone TM902 Telephony Modem is DOCS S® 3.0 or Euro-DOCS S™ 3.0

compliant with the following features:

• Speed: much faster than dialup or SDN service; up to eight times faster

than DOCS S 2.0 cable modems

• Connectivity: supports Ethernet connection

• Flexibility: provides two independent lines of telephone service as well as

high speed data

• Compatibility:

– Data services: DOCS S or Euro-DOCS S 3.0 compliant and backward-

compatible with DOCS S 2.0 or 1.1; supports tiered data services (if of-

fered by your cable company)

– Telephony services: PacketCable™ and Euro-PacketCable 1.5 or 1.0 com-

pliant

What’s in the Box?

Make sure you have the following items before proceeding. Call your cable company

for assistance if anything is missing.

• Telephony Modem

• Power Cord

• Quick nstallation Guide

• Wall-Mounting Template and nstructions

• Ethernet Cable

• Mini CD-ROM (80mm)

Note: An adapter is required for slot-loading drives. Adapter is not included.

• End User License Agreement

Touchstone TM902 Telephony Modem User’s Guide

Safety

Getting

Started Installation

Ethernet

Conﬁguration Usage Troubleshooting Glossary

What’s on the CD?

The CD provides the following items:

• Quick nstall Guide

• User’s Guide

Items You Need

f you are installing the Telephony Modem yourself, make sure you have the fol-

lowing items on hand before continuing:

•Telephony modem package: see What’s in the Box? for a list of items in

the package.

•Coaxial cable (coax): as shown in the image to the left, this is a thin cable

with a connector on each end. t is the same kind of wire used to connect to

your television for cable TV. You can buy coax from any electronics retailer

and many discount stores; make sure it has connectors on both ends. There

are two types of connectors, slip-on and screw-on; the screw-on connectors

are best for use with your Telephony Modem. The coax should be long

enough to reach from your Telephony Modem to the nearest cable outlet.

Note: For best performance, use high-quality RG-6 type coax cable and mini-

mize or eliminate splitters between the cable jack and the Telephony Modem.

•Phone Cable: as shown in the image to the left, this is a standard phone

cable with standard phone connectors (RJ11 type) on both ends. You can

buy phone cables from any electronics retailer and many discount stores.

•Splitter (optional): provides an extra cable connection by splitting a sin-

gle outlet into two. You may need a splitter if you have a TV already con-

nected to the cable outlet that you want to use. You can buy a splitter from

any electronics retailer and most discount stores; you may also need a short

piece of coax cable (with connectors); use it to connect the splitter to the

cable outlet and then connect the Telephony Modem and TV to the splitter.

Note: A splitter effectively cuts the signal in half and sends each half to its

two outputs. Using several splitters in a line may deteriorate the quality of

your television, telephone, and/or internet connection.

Touchstone TM902 Telephony Modem User’s Guide

Safety

Getting

Started Installation

Ethernet

Conﬁguration Usage Troubleshooting Glossary

Coax Cable

Phone Cable

•Wall-mount hardware (optional): if you want to wall-mount your Tele-

phony Modem, you need to obtain two drywall anchors or wood screws. See

the Wall-Mount Template and nstructions for more details.

•Information packet: your cable company should furnish you with a packet

containing information about your service and how to set it up. Read this in-

formation carefully and contact your cable company if you have any ques-

tions.

Getting Service

Before trying to use your new Telephony Modem, contact your local cable company

to establish an nternet account and telephone service. When you call, have the

following information ready:

• the Telephony Modem serial number and MAC addresses of the unit (printed

on a sticker on the bottom of the Telephony Modem)

• the model number of the Telephony Modem

Save this information for future use. n addition, you should ask your cable com-

pany the following questions:

• Do you have any special system requirements or ﬁles that need to down-

load after am connected?

• When can start using my Telephony Modem?

• Do need a user D or password to access the nternet or my e-mail?

• Will my phone number(s) change?

• What new calling features will have and how do use them?

Touchstone TM902 Telephony Modem User’s Guide

Safety

Getting

Started Installation

Ethernet

Conﬁguration Usage Troubleshooting Glossary

Inhaltsverzeichnis

Andere Arris Modem Handbücher

Arris

Arris Touchstone TM502 Bedienungsanleitung

Arris

Arris SURFboard SBG6950AC2 Bedienungsanleitung

Arris

Arris Touchstone TM502 Bedienungsanleitung

Arris

Arris Touchstone CM450 Bedienungsanleitung

Arris

Arris TM502G Bedienungsanleitung

Arris

Arris Touchstone 402P Bedienungsanleitung

Arris

Arris SURFboard SB6190 Bedienungsanleitung

Arris

Arris SURFboard SBG6950AC2 Bedienungsanleitung

Arris

Arris SURFboard SB6190 Bedienungsanleitung

Arris

Arris Touchstone TM3202G Bedienungsanleitung

Arris

Arris CM82 Benutzerhandbuch

Arris

Arris Touchstone CM550 Bedienungsanleitung

Arris

Arris SURFboard SB6121 Bedienungsanleitung

Arris

Arris Touchstone TM502 Bedienungsanleitung

Arris

Arris SURFboard SB6183 Bedienungsanleitung

Arris

Arris Touchstone SBG6700-AC Bedienungsanleitung

Arris

Arris SURFboard T25 Bedienungsanleitung

Arris

Arris TM602G Gebrauchs- und Pflegehandbuch

Arris

Arris Touchstone TM702 Bedienungsanleitung

Arris

Arris Touchstone DG860 Gebrauchsanweisung

Arris

Arris Touchstone TG3452 Bedienungsanleitung

Arris

Arris SURFboard SBG6950AC2 Bedienungsanleitung

Arris

Arris Touchstone TM822G Bedienungsanleitung

Arris

Arris Surfboard G34 Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung