Artecta Newark 30W CCT Zoom Bedienungsanleitung

Newark 30W CCT Zoom 20°-60°

Highlite International B.V. –Vestastraat 2 –6468 EX –Kerkrade –the Netherlands

Product code: A0320220 –Black housing

A0320221 –White housing

USER MANUAL

ENGLISH

Newark 30W CCT Zoom 20°-60°

Product code: A0320220/A0320221

Preface

Thank you for purchasing this Artecta product.

The purpose of this user manual is to provide instructions for the correct and safe use of this product.

Keep the user manual for future reference as it is an integral part of the product. The user manual shall be

stored at an easily accessible location.

This user manual contains information concerning:

●Safety instructions

●Intended and non-intended use of the device

●Installation and operation of the device

●Maintenance procedures

●Troubleshooting

●Transport, storage and disposal of the device

Non-observance of the instructions in this user manual may result in serious injuries and damage of

property.

No part of this document may be copied, published or otherwise reproduced without the prior written

consent of Highlite International.

Design and product specifications are subject to change without prior notice.

For the latest version of this document or other language versions, please visit our website

www.highlite.com or contact us at [email protected]om.

Highlite International and its authorized service providers are not liable for any injury, damage, direct or

indirect loss, consequential or economic loss or any other loss arising from the use of, or inability to use or

reliance on the information contained in this document.

 2 
 
 
 
Newark 30W CCT Zoom 20°-60° 
Product code: A0320220/A0320221 
Table of contents 
1. Introduction..........................................................................................................................................................3 
 Before Using the Product ..................................................................................................................................3 
 Intended Use .......................................................................................................................................................3 
 LEDs Lifespan .......................................................................................................................................................3 
 Text Conventions ................................................................................................................................................3 
 Symbols and Signal Words................................................................................................................................4 
 Symbols on the Information Label ..................................................................................................................4 
2. Safety ....................................................................................................................................................................4 
 Warnings and Safety Instructions ....................................................................................................................4 
 Requirements for the User.................................................................................................................................5 
3. Description of the Device ...................................................................................................................................6 
 View and Dimensions ........................................................................................................................................6 
 Product Specifications ......................................................................................................................................7 
 Dimensions...........................................................................................................................................................8 
4. Installation and Deinstallation ...........................................................................................................................9 
 Safety Instructions...............................................................................................................................................9 
 Personal Protective Equipment .......................................................................................................................9 
 Installation Site Requirements ..........................................................................................................................9 
 Mounting..............................................................................................................................................................9 
 Dismounting.......................................................................................................................................................11 
 Direction Adjustment .......................................................................................................................................12 
 Connecting to Power Supply.........................................................................................................................12 
 Color Temperature Adjustment.....................................................................................................................12 
 Beam Angle Adjustment.................................................................................................................................12 
5. Troubleshooting .................................................................................................................................................13 
6. Maintenance .....................................................................................................................................................13 
 Preventive Maintenance................................................................................................................................13 
 Basic Cleaning Instructions .......................................................................................................................13 
 Corrective Maintenance................................................................................................................................13 
7. Transportation and Storage..............................................................................................................................14 
 Instructions for Transportation ........................................................................................................................14 
 Storage...............................................................................................................................................................14 
8. Disposal ..............................................................................................................................................................14 
9. Approval.............................................................................................................................................................14 
 
 

Newark 30W CCT Zoom 20°-60°

Product code: A0320220/A0320221

1. Introduction

Before Using the Product

Important

Read and follow the instructions in this user manual before installing, operating or

servicing this product.

The manufacturer will not accept liability for any resulting damages caused by the non-observance of

this manual.

After unpacking, check the contents of the box. If any parts are missing or damaged, contact your

Highlite International dealer.

Your shipment includes:

●Artecta Newark 30W CCT Zoom 20°-60°

(including track adapter)

●User manual

Fig. 01

Intended Use

This device is intended for use as an architectural light spot. It is suitable for indoor installation in

commercial and residential buildings. This device is suitable for household illumination.

Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.

LEDs Lifespan

The light output of the LEDs gradually decreases over time (lumen depreciation). High operating

temperatures contribute to this process. You can extend the lifespan of the LEDs by providing adequate

ventilation and operating the LEDs at the lowest possible brightness.

Text Conventions

Throughout the user manual the following text conventions are used:

●References: References to chapters and parts of the device are in bold lettering, for example:

“Refer to 2. Safety”, “turn the adjustment handle (05)”

●Notes: Note: (in bold lettering) is followed by useful information or tips

Newark 30W CCT Zoom 20°-60°

Product code: A0320220/A0320221

Symbols and Signal Words

Safety notes and warnings are indicated throughout the user manual by safety signs.

Always follow the instructions provided in this user manual.

DANGER

Indicates an imminently hazardous situation which, if not avoided, will result in

death or serious injury.

WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in

death or serious injury.

CAUTION

Indicates a potentially hazardous situation, which, if not avoided, may result in

minor or moderate injury.

Attention

Indicates important information for the correct operation and use of the

product.

Important

Read and observe the instructions in this document.

Provides important information about the disposal of this product.

Symbols on the Information Label

This product is provided with 2 information labels. One information label is located on the back side of the

track head. The other information label is located on the side of the track adapter.

The information labels contain the following symbols:

This device is designed for indoor use.

Independent controlgear

This device shall not be treated as

household waste.

SELV controlgear, short-circuit proof

2. Safety

Important

Read and follow the instructions in this user manual before installing, operating or

servicing this product.

The manufacturer will not accept liability for any resulting damages caused by the non-observance of

this manual.

Warnings and Safety Instructions

DANGER

Danger for children

For adult use only. The device must be installed beyond the reach of children.

●Do not leave various parts of the packaging (plastic bags, polystyrene foam, nails, etc.) within

children’s reach. Packaging material is a potential source of danger for children.

Newark 30W CCT Zoom 20°-60°

Product code: A0320220/A0320221

Attention

Power supply

Before connecting the device to the power supply, make sure that the current, voltage and frequency

match the input voltage, current and frequency specified on the information label on the device.

Attention

General safety

●Do not shake the device. Avoid brute force when installing or operating the device.

●If the device fails to work properly, discontinue the use immediately.

Attention

This device shall be used only for the purposes it is designed for.

This device is intended for use as an architectural light spot. It is suitable for indoor installation in

commercial and residential buildings. This device is suitable for household illumination.

This device does not contain user-serviceable parts. Unauthorized modifications to the device will render

the warranty void. Such modifications may result in injuries and material damage.

Attention

Before use, examine the device visually for any defects.

Attention

Do not expose the device to conditions that exceed the rated IP class conditions.

This device is IP20 rated. IP (Ingress Protection) 20 class provides protection against solid objects greater

than 12 mm, such as fingers, and no protection against harmful ingress of water.

Requirements for the User

This product may be used by ordinary persons. Maintenance may be carried by ordinary persons.

Installation and service shall be carried out only by instructed or skilled persons. Contact your Highlite

dealer for more information.

Instructed persons have been instructed and trained by a skilled person, or are supervised by a skilled

person, for specific tasks and work activities associated with the installation, service and maintenance of

this product, so that they can identify risks and take precautions to avoid them.

Skilled persons have training or experience, which enables them to recognize risks and to avoid hazards

associated with the installation, service and maintenance of this product.

Ordinary persons are all persons other than instructed persons and skilled persons. Ordinary persons

include not only users of the product but also any other persons that may have access to the device or

who may be in the vicinity of the device.

Newark 30W CCT Zoom 20°-60°

Product code: A0320220/A0320221

3. Description of the Device

The Artecta Newark 30W CCT Zoom 20°-60° is a compact LED spot suitable for indoor installation in shops,

exhibition halls, showrooms and similar venues. It features 3 selectable predefined color temperatures:

warm white (2700 K), neutral white (4000 K), and cold white (6000 K). The LED spot can be dimmed with

an external dimmer and the beam angle can be adjusted in the range 20° –60°.

The device is equipped with a 3-phase track adapter. The 3-phase track adapter is compatible with the

Artecta 3-phase track systems and with the most 3-phase tracks available on the market.

View and Dimensions

Fig. 02

01) Track adapter

02) Track lock

03) Circuit selector (0, 1, 2 and 3)

04) Pivot connector

05) Color temperature selector (WW, NW, CW)

06) Track head

07) Zoom ring

08) Zoom mark

Newark 30W CCT Zoom 20°-60°

Product code: A0320220/A0320221

Product Specifications

Model:

Artecta Newark 30W CCT Zoom 20°-60°

Electrical:

Input voltage:

220–240 V AC, 50/60 Hz

Power consumption:

35 W (at full output)

PFC:

0,99

Physical:

Dimensions:

233 x 189 x 80 mm (L x W x H) (with the track adapter)

Weight:

0,85 kg (with the track adapter)

Track adapter:

Input voltage:

220–240 V AC, 50/60 Hz

Input current max:

0,17 A

Protection class:

Output voltage:

16–40 V DC

Output voltage max:

60 V DC

Output current max:

0,75 A

Type output:

SELV

Phases:

Optics:

Light source:

30 W COB LED, non-replaceable

Dimmer:

External, TRIAC type

Beam angle (adjustable):

20° –60° at steps of 1°

Luminous flux:

1740 lm @ 2700 K and 60°

1400 lm @ 2700 K and 20°

2160 lm @ 4000 K and 60°

1730 lm @ 4000 K and 20°

2150 lm @ 6000 K and 60°

1720 lm @ 6000 K and 20°

CCT (selectable):

WW –2700 K

NW –4000 K

CW –6000 K

CRI:

Movement:

Tilt range:

0–90°

Turning range:

0–350°

Construction:

Housing:

Aluminum

Color:

A0320220 –Black

A0320221 –White

IP rating:

IP20

Finish:

Powder coated

Thermal:

Maximum ambient temperature ta:

40 °C

Minimum ambient temperature:

-20 °C

Minimum distance:

Minimum distance from flammable surfaces:

0,5 m

Minimum distance to lighted object:

0,5 m

Newark 30W CCT Zoom 20°-60°

Product code: A0320220/A0320221

Dimensions

Fig. 03

Newark 30W CCT Zoom 20°-60°

Product code: A0320220/A0320221

4. Installation and Deinstallation

Safety Instructions

WARNING

Incorrect installation and deinstallation can cause serious injuries and damage of

property.

Installation and deinstallation of the device must be carried out only by instructed or skilled persons.

Follow all applicable European, national and local safety regulations concerning electrical installations in

buildings and working at heights.

Before installing or deinstalling the device make sure that the track system is disconnected from power

supply.

Personal Protective Equipment

During installation and deinstallation wear personal protective equipment in compliance with the

national and site-specific regulations.

Installation Site Requirements

●The device can be used only indoors.

●The device can be mounted only to a 3-phase track system.

●The minimum distance to other objects must be bigger than 0,5 m.

●The maximum ambient temperature ta= 40 °C must never be exceeded.

●The relative humidity must not exceed 50 % with an ambient temperature of 40 °C

Mounting

The device can be mounted only to a 3-phase track system.

CAUTION

Restrict the access under the work area during mounting.

To mount the device, follow the steps below:

01) Disconnect the track system from the power supply.

02) Make sure that the circuit selector (03) is in OFF position (0) and the track lock (02) is in unlocked

position, as shown in Fig. 04.

03) Align the flange of the track adapter (01) with the track, as shown in Fig. 05.

Fig. 04

Fig. 05

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Artecta Sicherheitskamera Handbücher

Artecta

Artecta New Port 15W CCT 38 V1 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung