Asoka PlugLink 9650 Bedienungsanleitung
User’s Guide
PlugLink 9650 Ethernet Adapter
PL9650-WT
© 2011 Asoka USA Corporation. Asoka, PlugLink and the Asoka logo are registered trademarks or
trademarks of Asoka USA Corporation. Information is subject to change without notice. All rights
reserved.
PL9650UG-66-0369-01Rev.001
Asoka® User’s Guide
PlugLink 9650 Ethernet Adapter PL9650-WT
2
Table of Content
Chapter Title Page
1 Introduction 3
2 Important Safety Information 4
3 Learning About your Powerline Ethernet Adapter 5
4 Preparing to Install 7
5 Installing the Powerline Ethernet Adapter 9
6 Using Setup Assistant 15
7 Using Admin Utility 19
8 Technical Support Information 24
9 Technical Specifications 22
10 Warranty Information 26
Asoka® User’s Guide
PlugLink 9650 Ethernet Adapter PL9650-WT
3
Chapter 1
Introduction
Thank you for purchasing a PlugLink 9650 Ethernet Adapter (PL9650-WT) from Asoka. This adapter
lets you network your home or office by simply plugging directly into your wall outlet. Now,
networking is as easy as plugging in a night light. With your PlugLink 9650 Ethernet Adapter, you
can easily share your high-speed Internet broadband, mp3s, video and gaming throughout the
home or office without pulling any new cabling.
This unit will not interfere with other household appliances such as hair dryers, vacuum cleaners
or microwave ovens. Consuming only 5 watts of power, it is environmentally friendly and will not
noticeably increase your electrical bill. It is a simple, secure and reliable choice for web surfing,
playing games, complimenting your existing wireless network, mp3 streaming and even high-
definition (HD) video sharing.
This User’s Guide shows you how to connect your PlugLink 9650 Ethernet Adapter to your PC or
cable/DSL router. Setup is easy, just follow the instructions in this guide and your network will be
up and running in a matter of minutes.
Asoka® User’s Guide
PlugLink 9650 Ethernet Adapter PL9650-WT
4
Chapter 2
Important Safety Instruction for the PlugLink 9650 Ethernet Adapter
The following precautions should be taken when using this product:
Read all instructions before installing and operating this product.
Do not open the cover on this product and/or alter this product in any way.
Follow common household electrical safety practices.
If you have any questions or concerns regarding these safety measures, please contact
Monday through Friday from 9:00 am to 5:00 pm PST, excluding holidays.
Asoka® User’s Guide
PlugLink 9650 Ethernet Adapter PL9650-WT
5
Chapter 3
Learning about your PlugLink 9650 Ethernet Adapter
Package Contents
PlugLink 9650 Ethernet Adapter (PL9650-WT)
6 feet Ethernet cable
Quick Installation Guide
Installation Resource CD
Warranty and Support Information Card
If any of the parts are incorrect, missing, or damaged, contact the retailer where you made your
purchase. Keep the carton, including the original packing materials, in case you need to return
the unit for repair.
The Front Panel
The front panel of the PL9650-WT Adapter contains the status lights described below.
Figure 3-1: PL9650-WT Front Panel
You can use the status lights to verify connections. Viewed from top to bottom, left to right, the
table describes the lights on the front panel of the unit.
Table 3-1: Status Light Descriptions
Power On
Off Indicates Device Powered On
Indicates No Power
PLC Activity
Blinking
Off Indicates Activity on Powerline
Indicates No Activity on Powerline
(Should blink Intermittently)
ETH Link On
Blinking
Off
Indicates Ethernet Connectivity
Indicates Ethernet Traffic
Indicates No Ethernet Activity
Asoka® User’s Guide
PlugLink 9650 Ethernet Adapter PL9650-WT
6
The Bottom Panel
The bottom panel of the PL9650-WT contains an Ethernet (RJ-45) port as shown in figure 3-2.
Figure 3-2: PL9650-WT Front Panel
The Rear Panel
The label on the rear panel of the PL9650-WT Adapter contains the items listed below.
MAC address
Model number
Part number
Serial number
Unique device password
Note: For future convenience, please write this information down in your Warranty Support
Information card.
Figure 3-3: Rear Label
Asoka® User’s Guide
PlugLink 9650 Ethernet Adapter PL9650-WT
7
Chapter 4
Preparing to Install the PlugLink 9650 Ethernet Adapter
The PlugLink 9650 Ethernet Adapter lets you set up a home or an office network using your
existing electrical outlets. It can also easily compliment your existing network by connecting to
any device with a 10BaseT/ 100BaseT Ethernet-capable device.
In order to share a peer-to-peer connection between computers, all you will need is:
One (1) PL9650-WT device attached to each computer.
Figure 4-1: Peer-to-peer network diagram.
In order to share a Broadband connection between computers, all you will need is:
One (1) PL9650-WT device attached to each computer
Standard Cable/DSL Modem
Standard Cable/DSL Router or Wireless Router
[
Figure 4-2: Sharing broadband connection network diagram.
Asoka® User’s Guide
PlugLink 9650 Ethernet Adapter PL9650-WT
8
You can also use the PlugLink 9650 Ethernet Adapter with other Ethernet enabled device like IP
Cameras, IP STB, game consoles, and many more.
Figure: 4-3: Networking other Ethernet enabled devices.
Asoka® User’s Guide
PlugLink 9650 Ethernet Adapter PL9650-WT
9
Chapter 5
Installing the PlugLink 9650 Ethernet Adapter
Note: Do not connect the PlugLink 9650 Ethernet Adapter into a power strip, extension cord,
uninterruptible power supply (UPS), or surge protector. This may prevent the unit from working
properly or degrade the network performance.
1. Connect each of your PlugLink 9650 Ethernet Adapters.
a) Connect the unit into a nearby wall outlet
b) Connect the enclosed Ethernet cable to the Ethernet port of the unit
c) Connect the other end of the cable to the Ethernet port of the PC
2. Insert the enclosed Installation Resource CD into your CD-ROM drive. The PlugLink 9650
Ethernet Adapter Installation Utility should appear automatically. If it does not appear within
30 seconds, select your CD-ROM drive and double-click on the icon named “Setup.exe” to
initiate the Installation Utility.
3. The Welcome screen should appear. Click on “Install Driver and Utility” to proceed to
installation.
Figure: 5-1: Welcome screen.
4. Click “Next” to begin the installation process.
Asoka® User’s Guide
PlugLink 9650 Ethernet Adapter PL9650-WT
10
Figure: 5-2: Begin Installation Screen.
5. Click “Next” to continue Installation.
Figure: 5-3: InstallShield Installation Welcome Screen.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Asoka Adapter Handbücher
Asoka
Asoka PL9667-Q1 Bedienungsanleitung
Asoka
Asoka PlugLink PL9661-G1 Bedienungsanleitung
Asoka
Asoka PlugLink-ETH-500 Bedienungsanleitung
Asoka
Asoka PlugLink PL9661-I2 Bedienungsanleitung
Asoka
Asoka PlugLink PL9660-Q1 Bedienungsanleitung
Asoka
Asoka PlugLink HD AV ECo PL9661-ETH Bedienungsanleitung
Asoka
Asoka PlugLink PL9667-B3 Bedienungsanleitung
Asoka
Asoka PlugLink PL9650-ETH Bedienungsanleitung
Asoka
Asoka PlugLink 500G Bedienungsanleitung
Asoka
Asoka PlugLink AV 9660 Bedienungsanleitung
