Asoni JNC-2613M Bedienungsanleitung

2 Mega-Pixel

H.264 CMOS Network Camera

JNC-2613M / JNC-2613MW /

JNC-2613M-PoE

User’s Manual

Date: 11/10/2010

Firmware Version: V1.0.18

Content

Content ........................................................................................................................................1

1. Preface .................................................................................................................................2

2. Product Specifications...........................................................................................................2

3. Product Installation ...............................................................................................................5

A. Hardware Installation.........................................................................................................5

B. Monitor Setting..................................................................................................................8

C. IPAssignment ...................................................................................................................9

4. Live Video...........................................................................................................................11

5. Configuration ......................................................................................................................16

A. System............................................................................................................................16

B. Video/Audio Setting.........................................................................................................23

C. Network Setting...............................................................................................................31

D. Event Handling................................................................................................................41

6. Network Configuration ........................................................................................................53

A. Intranet Only....................................................................................................................53

B. Internet Only....................................................................................................................55

C. Intranet + Internet............................................................................................................58

7. Factory Default ...................................................................................................................61

Compatible List of SD Card........................................................................................................62

1. Preface

This camera is a professional 2 Mega-Pixel CMOS network camera which builds in web

server. User views real-time video via IE browser. It supports H.264, JPEG and MPEG4

(3GPP Only) video compression which provides smooth and high quality video. The event

video can be stored in the SD card, and can be playback remotely.

The PoE model built-in support for Power over Ethernet allows the camera to receive both

data and power over a single Ethernet cable.

This camera is an easy-to-use IP camera which is designed for security application.

2. Product Specifications

z2 Mega-Pixel CMOS Sensor

zH.264 / MJPEG / MPEG4 (3GPP Only) compression formats.

zSupports resolution up to 1600x1200

zH.264 / MJPEG / MPEG4 (3GPP Only) triple streaming.

zSelf-Contained HTTP Web Server providing Internet capability for remote access

zWireless network connection (Wireless model)

zBuilt-in PoE splitter, support for Power over Ethernet (PoE model)

zSupports SD card for local event recording

z2-way audio

zOnline firmware upgrade

zRecorded files compatible with Microsoft Windows Media Player

Hardware

CPU / RAM / ROM ARM 9, 32 bit RISC / 256MB / 16MB

Image Sensor 1/3” CMOS, 2 Mega-Pixel

Lens 4 mm Mega-Pixel Fixed Lens

Illumination 0. 5 lux

Day / Night Optional Mechanism IR Cut Filter (ICR)

Lens Changeable Yes, CS Mount

Support DC IRIS Yes

Video Out 1 Analog video out (BNC connector)

Audio In Built-in microphone

Audio Out 1 Line out (RCA connector)

Digital I/O 1 Digital in / 1 Relay out

Power Supply Normal & Wireless model: DC 12V, 1A

PoE model (built-in PoE Splitter):

Use PoE: PoE Injector (IEEE 802.3af)

Or, use Power Adaptor: DC 12V, 1A

Power Consumption Max. 6 Watt

Dimensions W58 x H65 x D131.5 mm

Network

Ethernet 10/ 100 Base-T

Wireless (Wireless model) 802.11b/g, supports WPA-PSK, WPA2-PSK, WEP 64/ 128 bit

Network Protocol HTTP, TCP/IP, RTP/RTSP, 3GPP, SMTP, FTP, PPPoE, DHCP, DDNS, NTP, UPnP

System

Video Resolution 1600x1200, 1280x1024, 1280x960, 1280x720

800x592, 640x480, 320x240, 176x144

Compression Format H.264 / MJPEG / MPEG-4 (3GPP only)

Frame Rate Up to 15FPS@1600x1200, 22FPS@1280x1024, 25FPS@1280x960,

30FPS@1280x720

Triple Streaming Yes (2 for live view, 1 for 3GPP)

3GPP Yes, Live view with 3G mobile phone

Video BitrateAdjustment CBR, VBR

VideoAdjustment Brightness, Contrast, Sharpness, BLC, Night mode, Video orientation

Image Snapshot Yes

Privacy Mask Yes, 3 different areas

Motion Detection Yes, 3 different areas

Event Trigger Motion Detection, Digital In

Triggered Action Send Email, Send to FTP, Save to SD Card, Relay Out

Pre/ Post Alarm Yes, configurable

Security Password protection

Firmware Upgrade HTTP mode, can be upgraded remotely

Connection Up to 10 clients simultaneously

Audio Yes, 2-way

SD card management

Recording Trigger Motion Detection, Digital In, IP Check, Network Disconnect

Schedule Snapshot with schedule

Video Format Video (AVI), Snapshot (JPEG)

Video Playback Yes

Web browsing requirement

OS Windows 2000, XP, Vista, Windows 7

Web Browser Microsoft IE V7.0 (32-bit) or above, Mozilla Firefox V5.0 or above, Opera V10

or above, Safari V4.0.5 or above, Google Chrome V5.0 or above

Suggested Hardware Intel Core 2 Duo 1.66GHz, RAM: 1GB

Graphic card: 128MB onboard RAM

* Specifications are subject to change without notice

3. Product Installation

A. Hardware Installation

Cable Connections

nNetwork Connector: The RJ-45 connector allows connect the Ethernet cable.

oPower Jack: To connect the included power adapter.

pAudio Out: The RCA connector allows connect to an amplified speaker,

you can hear the voice of the remote site from the speaker.

qVideo Out: The BNC connector allows connect to the analog display to

output analog video for locally monitoring.

rDigital I/O: Digital In and Relay Out.

sSD Card Slot: Insert a SD card if you want to do the event recording (video

only) in the camera.

tAntenna Connector: Available for Wireless model. To connect the included wireless

antenna.

1. Connect the cable of Digital I/O, Video output, and Audio output if you want to use

these functionalities.

2. Connect the wireless antenna for the Wireless camera.

3. Connect Ethernet cable for network connection.

4. Connect power adapter to turn on the camera.

5. If the camera is PoE model, the power adapter is not necessary. The camera will get

the power from the PoE injector or PoE switch.

PoE (Power over Ethernet) is a technology that integrates power into a standard LAN

infrastructure. It enables power to be provided to the network device, such as an IP

phone or a network camera, using the same cable as that used for network connection.

It eliminates the need for power outlets at the camera locations. Please follow the

below figure for the connection.

6. Set up the network configurations according to the network environment. For further

explanation, please refer to Network Configuration chapter.

7. After finish the configuration for the very first time, if you want to use wireless network,

plug out the Ethernet cable.

I/O Connections

I/O terminal connector – used in application, for e.g., motion detection, event triggering,

alarm notifications. It provides the interface to:

z1 set of Digital Input (Alarm In + GND) – The digital inputs for connecting devices

that can toggle between an open and closed circuit, such as PIRs, door/window

contacts, glass break detectors, etc. When a signal is received the status changes

and the input becomes active.

z1 sets of Relay Output (N.O. + COM or N.C. + COM) –The output to Relay switch

of the alarm device such as LEDs, Sirens, etc.

PoE Switch or PoE Injector

Ethernet Cable

Data only Ethernet Cable

Mixed data and power

PoE Network Camera

To Network

Digital Input (Alarm Input)

GND (Ground): Initial status is LOW.

Alarm: Max. 50mA, 12VDC.

Relay output

COM: Common pin.

N.O. (Normally Open): Max. 1A / 24VDC or 0.5A/ 125VAC.

N.C. (Normally Close): Max. 1A / 24VDC or 0.5A/ 125VAC.

Alarm In Relay Out

Door/Window

Contacts

B. Monitor Setting

1. Right-Click on the desktop. Select “Properties”

2. Change color quality to “Highest (32bit)”.

C. IP Assignment

¾Always consult your network administrator before assigning an IP address to your

camera in order to avoid using a previously assigned IP address.

¾MAC Address: Each network camera has a unique Ethernet address (MAC address)

shown on the sticker of the camera.

¾One final note, although the IP Search is able to find and configure any network

camera on the LAN except those that are behind a router, it is a good idea to set the

host PC to the same subnet. In order to connect to the Web-based user interface of

the network camera, the host PC must be in the same subnet. For more information

about subnets, please consult your network administrator.

There are 3 kinds of IP configuration:

zFixed IP (Public IP or Virtual IP)

zDHCP (Dynamic IP)

zDial-up (PPPoE)

IP Search is a utility that provides an easier, more efficient way to configure the IP

address and network settings of the network camera in Local Network (LAN). It even

provides a convenient way to set the network settings for multiple devices simultaneously.

Moreover, IP Search can save the network settings for all devices as a backup and

restore them when necessary.

The software can be installed from the attached software CD.

1. Once IP Search has been successfully installed on the computer, double click the

“IP Search” icon on the desktop.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Asoni Sicherheitskamera Handbücher

Asoni

Asoni CAM679F Bedienungsanleitung

Asoni

Asoni CAM633 Bedienungsanleitung

Asoni

Asoni CAM677G Bedienungsanleitung

Asoni

Asoni CAM678H Bedienungsanleitung

Asoni

Asoni CAM656D Bedienungsanleitung

Asoni

Asoni CAM640 Bedienungsanleitung

Asoni

Asoni CAM646M-PoE Bedienungsanleitung

Asoni

Asoni CAM737MIR Bedienungsanleitung

Asoni

Asoni CAM6833EV Bedienungsanleitung

Asoni

Asoni CAM636M Bedienungsanleitung

Asoni

Asoni CAM713M Bedienungsanleitung

Asoni

Asoni CAM434 Bedienungsanleitung

Asoni

Asoni CAM746F Bedienungsanleitung

Asoni

Asoni CAM410 Bedienungsanleitung

Asoni

Asoni CAM647 Bedienungsanleitung

Asoni

Asoni CAM417 Bedienungsanleitung

Asoni

Asoni CAM437 Bedienungsanleitung

Asoni

Asoni CAM668F Bedienungsanleitung

Asoni

Asoni CAM662H Bedienungsanleitung

Asoni

Asoni CAM419 Bedienungsanleitung

Asoni

Asoni CAM661H Bedienungsanleitung

Asoni

Asoni CAM410 Bedienungsanleitung

Asoni

Asoni CAM417-PoE Bedienungsanleitung

Asoni

Asoni CAM412 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung