OM00016 Rev C, FP00097 Operation Manual –March 5, 2023 Page 8of 9
Maintenance
The LCM is a sealed unit and does not require regular maintenance to operate. Depending on
environmental conditions the condenser fins could become fouled with dust and debris. A fouled
condenser will cause the LCM to operate inefficiently and potentially over-heat and shut down. To clean
the condenser, follow the steps below. All work should be performed while wearing safety glasses and
ear protection with the LCM powered off.
1. Use a damp (water), lint free towel and wipe the inner face of the condenser. Be careful not to
bend or damage any of the fins.
2. Alternatively, the user may remove the fan and air may be blown through the condenser to
remove any dust. Use a compressed air source regulated to between 50 and 100 psi and keep
the nozzle at least 2 inches away from the condenser face. Be sure to reattach the fan and fan
guard when finished cleaning the coils.
Customer Service
Commercial Product Warranty
Aspen System LLC (hereinafter referred to as “Aspen”), warrants to the original purchaser that products
sold shall be free from defects in material and workmanship for the warranty period not to exceed one
year from the date of shipment. If buyer claims that a product violates such warranty, Aspen, upon
notice promptly given, will either examine the product at buyer’s site, or issue shipping instructions for
return to Aspen at buyer’s expense, transportation charges prepaid.
Aspen’s sole obligation under its warranty shall be, at its option, to repair, replace or refund the price of
any product thereof which is proved to violate such warranty. In no event, whether based on contract,
indemnity, warranty, tort (including negligence), strict liability or otherwise, shall Aspen be liable to the
buyer for special, indirect, incidental or consequential damages whatsoever including, without
limitation, loss of profit or revenue.
The above warranty is buyer’s exclusive remedy and Aspen hereby expressly disclaims all other
warranties, express or implied, including the implied warranty of merchantability and the implied
warranty of fitness for a particular purpose. The foregoing shall constitute the sole remedy of the buyer
and the sole liability of Aspen.
This Limited Warranty shall not apply to any product or component thereof which has been repaired or
altered outside of Aspen’s factory in any manner so as, in Aspen’s sole judgment, to affect its
serviceability, or to any product that has been subject to alteration, accident, misuse, abuse, neglect or
normal wear. The Limited Warranty shall not apply to products which have been assembled or installed
or used in a manner contrary to Aspen’s printed instructions, or due to failure to follow Aspen printed
instructions for operation and maintenance. This product is designed and intended to be installed and
operated in an enclosure that is sealed from the ambient environment. Exposure to water leakage into
the enclosure and/or excessive condensation from exposure to humid ambient air during operation will
void this warranty. Any technical assistance provided by Aspen’s personnel or representatives in system
design is construed to be a proposal and not a recommendation. The responsibility for determining
feasibility rests with the user and should be subject to test. Only the terms expressed in this Limited
