Assa Abloy LOCKWOOD Sliding Door Latch Bedienungsanleitung

Installation Instructions

Tools Required: • Drill • 10.0mm Drill Bit

• 3.0mm Drill Bit • Phillips Screwdriver

Door Specifications: ø10mm

ø10mm

20mm 20mm

Centre line of ﬁxing

screw holes

1. Fixing Holes Required in Frame

Refer to door specification drawing to determine hole

centres. Drill three holes into the door frame ø10mm, the top

and bottom holes spaced 20mm from centre hole and inline

vertically. Remove any burs from the edge of the holes.

Note: The centre fixing hole should be at least 1.5m from the

floor to comply with swimming pool fencing regulations.

Ensure beak

points down

3. Assemble Latch

Insert the latch to the inside chassis assembly.

Snib tabs away

from door frame

Snib tabs away

from door frame

2. Fitting Chassis Assemblies to Frame

Align chassis assemblies to either side of doorframe. Screw the chassis to the door frame

(do not tighten at this stage) using the 2 x M4 fixing screws provided. Ensure the snib lever is

facing away from the door jamb.

Application: Self latches sliding door on closure.

Pack Contents:

2 x Chassis

Assemblies

Inside Cover Outside Cover

Strike Cover Screw PackStrike Latch

Drive Bar

Sliding Door Latch

Patent: NZ 556113

6g x

12.5mm

screws

6g x

14.5mm

screws

6. Fixing Strike to the Door Jamb

The strike can either be face fixed or side fixed (depending

on the design of the frame profile). Mark the hole positions

as close as possible in the centre of the fixing hole slots in the

strike. Drill two ø3mm holes for the 6g screws provided. Fix

the strike to the door frame.

7. Check Function

The latch should engage in

the strike automatically when

the door is closed and not

release unless the snib lever is

rotated down (either on the

inside or outside of the door).

8. Fit Covers

Clip the inside and

outside covers to the

chassis assemblies. Note

that both covers have cut

outs for the snibs but the

inside cover only has a cut

out for the latch. Fit the

strike cover to the strike.

9. Installation

Complete

4. Assemble Drive Bar

and Check Function

Insert the driving bar

between the two chassis

assemblies. Tighten the

M4 fixing screws fixing the

chassis assemblies, check

that the Sliding Door

Latch functions correctly.

Do not over tighten

screws.

5. Positioning Strike

Position the strike on the

frame by closing the door

and positioning the strike

vertically so it fully engages

with the latch.

Sliding Door Latch

077186 Feb13-1

ASSA ABLOY New Zealand Limited

6 Armstrong Road, Albany, Auckland 0632

info.nz@assaabloy.com

www.assaabloy.co.nz

Inhaltsverzeichnis

Andere Assa Abloy Sperren Handbücher

Assa Abloy

Assa Abloy EL595 Bedienungsanleitung

Assa Abloy

Assa Abloy medeco Aperio M100 Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 115 Hospital Latch Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Y-LL67AP Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin HPSK Bedienungsanleitung

Assa Abloy

Assa Abloy SECURITRON 32 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Real Living Assure Lock YRC216 Technische Daten

Assa Abloy

Assa Abloy PULSE PK200 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin IN100 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin BLSS ML2000 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent XC Series Bedienungsanleitung

Assa Abloy

Assa Abloy 836S Bedienungsanleitung

Assa Abloy

Assa Abloy EMTEK A Bedienungsanleitung

Assa Abloy

Assa Abloy Yale YDD424A Bedienungsanleitung

Assa Abloy

Assa Abloy ELECTRIC LOCK Bedienungsanleitung

Assa Abloy

Assa Abloy 840C-50 Bedienungsanleitung

Assa Abloy

Assa Abloy Securitron SAM Bedienungsanleitung

Assa Abloy

Assa Abloy EL490 Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Real Living B1L Z-Wave Technische Daten

Assa Abloy

Assa Abloy SECURITRON MORTISE UNLATCH MUNL-12 Bedienungsanleitung

Assa Abloy

Assa Abloy Abloy EL428 Bedienungsanleitung

Assa Abloy

Assa Abloy VingCard Essence Bedienungsanleitung

Assa Abloy

Assa Abloy OneSystem 819N Installationsanleitung

Assa Abloy

Assa Abloy FAB INTERLOCK Bedienungsanleitung

Beliebte Sperren Handbücher anderer Marken

Magic

Magic 105 Bedienungsanleitung

Gantner

Gantner GAT NET.Lock 7020 System Kurzanleitung

Wittkopp

Wittkopp Insys 7202 Bedienungsanleitung

Dorma

Dorma Studio Classic Bedienungsanleitung

Securam

Securam ECSL-601 Bedienungsanleitung

Sudhaus

Sudhaus 3003 Bedienungsanleitung

Safety 1st

Safety 1st 48517 Bedienungsanleitung

Pado

Pado FDS-10 Bedienungsanleitung

Esco

Esco systeQ Series Bedienungsanleitung

COMPX

COMPX National D8951 Bedienungsanleitung

secureo

secureo Key Box Bedienungsanleitung

Stock Loks

Stock Loks C8713 Bedienungsanleitung

COMPX

COMPX 1T-058 Betriebsanleitung

Auslock

Auslock T11 Bedienungsanleitung

ELCOM

ELCOM 7205 Bedienungsanleitung

Stealth SAFES

Stealth SAFES ShadowVault Bedienungsanleitung

Knox

Knox KeySecure 5 Bedienungsanleitung

Kwikset

Kwikset 48334/01 Bedienungsanleitung