Assa Abloy TRAKA TOUCH M Bedienungsanleitung

This Document is the subject of copyright and must not be copied or

otherwise reproduced either in whole or in part without the express

written permission of TRAKA.

TRAKA TOUCH M

INSTALLATION GUIDE

TD0034

03/08/18

VERSION 5.0

V5.0 03/08/18 TD0034 Page 2 of 30

This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT”

VERSION HISTORY

Version Date Who Description of Changes Approved By

1.0 07/08/12 AK Initial version of document

2.0 09/08/12 AK Changed cabinet image to reflect overall dimensions

3.0 24/08/12 AK General updates

3.1

01/10/12

Added battery specification section

4.0

09/05/14

Edited the installation section

4.1 26/01/15 AK Updated the PCB type to the new iMX28

4.2 22/10/15 LN Rewritten to match current installation process

4.3 21/07/16 RC Document changed from UD0044 to TD0034

4.4 21/11/16 RC Added UL Certification information

4.5 12/04/17 LN

Added ‘Product Details’ section with compliance and electrical

details. Added ‘Mounting Info & Safety Tips’ section. Added

‘Product Disconnection’ section. Updated the ‘Connecting the

Mains Power’ section. Added ‘Replacing the Fuse in a Surge

Protection Device’ section. Added ‘Switching off the System’

section.

4.6 19/04/17 LN Edited a note in ‘Connecting the Mains Power’ section.

4.7 06/12/17 RC Added ferrite core installation process

4.8

07/12/17

Update information from UL testing

4.9

08/05/18

General updates

5.0

03/08/18

Knock out dimensions added

V5.0 03/08/18 TD0034 Page 3 of 30

This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT”

CONTENTS

Version History................................................................................................................................................2

Contents ........................................................................................................................................................3

1. Introduction.............................................................................................................................................5

2. Product Details.........................................................................................................................................5

2.1 Electrical Rating ...............................................................................................................................5

2.2 Environmental Rating .......................................................................................................................5

2.3 Compliance Level .............................................................................................................................5

2.3.1 USA and Canada ..........................................................................................................................5

2.3.2 Europe........................................................................................................................................5

3. System & iFob Diagram.............................................................................................................................6

3.1 System Diagram ..............................................................................................................................6

3.1.1 System Key .................................................................................................................................6

3.2 iFob (Intelligent fob) & Key bunch Diagram .........................................................................................7

3.2.1 iFob Key......................................................................................................................................7

4. Before You Start.......................................................................................................................................8

4.1 Mounting Info & Safety Tips...............................................................................................................8

4.2 What You Should Have......................................................................................................................9

4.3 Tools and Materials Required For Installation .....................................................................................10

4.4 Wall Preparation.............................................................................................................................10

5. Installing the System..............................................................................................................................12

6. Connecting the Mains Power ....................................................................................................................17

6.1 USA and Canada ............................................................................................................................17

7. Switching On the System.........................................................................................................................21

8. Product Disconnection.............................................................................................................................22

8.1 Mains Disconnection .......................................................................................................................22

8.2 Battery Disconnection.....................................................................................................................22

9. Maintenance ..........................................................................................................................................23

9.1 Switching off the System.................................................................................................................23

9.2 Manually Opening the Door .............................................................................................................24

9.3 Serial Number/Rating Plate Location.................................................................................................25

9.4 Replacing the Fuse in a Surge Protection Device.................................................................................26

9.5 Backup Battery ..............................................................................................................................27

9.5.1 Battery Location.........................................................................................................................27

V5.0 03/08/18 TD0034 Page 4 of 30

This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT”

9.5.2 Battery Connection Details ..........................................................................................................29

9.5.3 Battery Specification...................................................................................................................29

10. Technical Support ..............................................................................................................................30

V5.0 03/08/18 TD0034 Page 5 of 30

This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT”

1. INTRODUCTION

This User Guide has been prepared to assist with the installation of a Traka Touch M System.

2. PRODUCT DETAILS

2.1 ELECTRICAL RATING

Power supply: Input: 100-240V AC, Output: 15V DC

Battery backup: DC12v 7Ah

Power consumption: 35W max

2.2 ENVIRONMENTAL RATING

Operating temp: Ambient, for indoor use only (-5°C to +40°C at 95% non-condensing relative humidity)

2.3 COMPLIANCE LEVEL

2.3.1 USA AND CANADA

CAN/ULC S319

ULC S319 Class = Class 1

The product’s or component’s compliance to ULC-S319 would be invalidated through the use of any add-on, expansion,

memory, or other module manufactured or supplied by the manufacturer or manufacturer’s representative.

UL294

The levels of access/class of protection are summarised below:

•Attack Level – Level IV

•Endurance Level – Level IV

•Line Security Level – Level I

•Standby Power Level – Level IV

2.3.2 EUROPE

Contact Traka for a copy of the CE declaration of conformity.

V5.0 03/08/18 TD0034 Page 6 of 30

This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT”

3. SYSTEM & IFOB DIAGRAM

3.1 SYSTEM DIAGRAM

3.1.1 SYSTEM KEY

1. Cam Lock

2 keys are supplied with your Traka system. These are required for gaining access to the system electronics

during servicing and maintenance. We ask that you do not keep these keys in the system. In case of a

system failure, they will be required to gain access to the manual release door catch located behind the pod

allowing emergency access to the keys.

2. Touch Screen

The Touch sensitive LCD works as a user friendly interface for our embedded application. The numeric

keypad, alphabetic keyboard and receptor buttons are incorporated into this easy to use 7” LCD.

3. Card /Proximity Reader

Traka supports a wide array of access devices. The primary job of any access device is to identify the user

to the Traka system. Once the system knows who you are, it can grant or deny access to specific keys

accordingly.

4. Control Pod

Incorporates the touch screen, reader and the cam Lock providing access to the systems electronics.

5. Receptor Slot

The Receptor Slot holds the iFob in place.

V5.0 03/08/18 TD0034 Page 7 of 30

This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT”

3.2 IFOB (INTELLIGENT FOB) & KEY BUNCH DIAGRAM

3.2.1 IFOB KEY

1. iFob

The iFob is at the heart of any Traka Key Management system. It is a bullet shaped device made from nickel

plated brass. It contains a microchip with a unique identification number allowing the Traka system to

identify the key(s) attached.

2. Identification Tag

The identification tag displays the cabinet slot number to which the iFob belongs. The tags can be provided in

a variety of colours which is useful when managing multiple Traka systems. For example tag “101 yellow”

would belong to position 101 in the “Yellow” cabinet and tag “101 blue” would belong to position 101 in the

“blue” cabinet. This makes it nice and simple for system administrators and users.

3. Security Seal

The Security Seal is used to attach the key(s) to the iFob using the special tools from the kit provided. Once

the seal is locked, the only way to detach the keys from the iFob is to cut the security seal using the special

cutter tool from the supplied kit.

V5.0 03/08/18 TD0034 Page 8 of 30

This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT”

4. BEFORE YOU START

4.1 MOUNTING INFO & SAFETY TIPS

Traka systems contain delicate electronic components which may be damaged if Electrostatic

Discharge (ESD) control measures are not correctly adhered to.

Traka systems must be securely fastened to a wall to eliminate the potential of the system being

pulled over and causing damage or injury.

Traka systems can be heavy and may require 2 persons to lift.

The wall (and any wall covering) to which the Traka System is fixed must be made of low

flammability material (at least 94 UL-5V flammability class equivalent).

Traka Touch systems can be heavy and therefore require a strong wall to fix to. Fixings are not

included and so when selecting the appropriate fixings it is essential they are strong enough to

retain the system and not pull out from the wall.

V5.0 03/08/18 TD0034 Page 9 of 30

This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT”

4.2 WHAT YOU SHOULD HAVE

Once you receive your Traka Touch system, please open the box and check you have the following…

a) Traka Touch M cabinet

b) Wall Mounting Bracket

c) 2x Override Keys

d) 3x M5 x 8.0 - Socket Button Screws (Traka Part No. FF-5-0030)

V5.0 03/08/18 TD0034 Page 10 of 30

This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT”

e) 1x Ferrite Core (FF-3-0049) Only required if connecting to a network

If you are missing any of the above please contact Traka immediately.

NOTE: Traka do not provide wall fixings for your system. Please ensure you source appropriate fixings for

the type of wall you are fixing to.

4.3 TOOLS AND MATERIALS REQUIRED FOR INSTALLATION

Traka does not provide tools and certain materials for the installation of the Traka Touch, you will need to source the

following…

•Drill

•Wall Fixings (appropriate for the type of wall you are fixing to)

•4mm Alan Key/T –bar

•Large Flat Headed Screwdriver

•Hammer

•20mm Grommet/Cable Gland

•20mm Conduit (if needed)

4.4 WALL PREPARATION

Using the below dimensioned drawing, ensure the area of wall is large enough to fit the system and clear from any

obstructions. The chosen location for the system should be no further than 1 Metre from the mains spur.

Inhaltsverzeichnis

Andere Assa Abloy Netzwerk-Hardware Handbücher

Assa Abloy

Assa Abloy SMARTair Wireless Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung