Assa Abloy Orion Bedienungsanleitung

ASSA ABLOY Hospitality 66 8003 016-3

Installation Manual

Orion High Voltage Thermostat

DRAFT

ASSA ABLOY Hospitality 66 8003 016-3

Copyrights

The information in this document is subject to change at the sole discretion of

ASSA ABLOY without notice.

Any use, operation or repair in contravention of this document is at your own risk.

ASSA ABLOY does not assume any responsibility for incidental or consequential

damages arising from the use of this manual.

All information and drawings in this document are the property of ASSA ABLOY.

Unauthorized use and reproduction is prohibited.

VingCard and Elsafe are registered trademarks of ASSA ABLOY.

ASSA ABLOY Hospitality 66 8003 016-3

Table of contents

.................................................................................................6FCC and ISED(IC) statements

........................................................................................................................ 6FCC statements

........................................................................................................................ 7

ISED (IC) statements

................................................................................................................................................ 7

End product labeling

.................................................................................................81. Introduction

.................................................................................................9

2. To install the software

........................................................................................................................ 92.1 To install a Visionline option

........................................................................................................................ 9

2.2 To install an Orion EMS client

................................................................................................................................................ 9

2.2.1 To start an Orion EMS client

.................................................................................................103. To install the Orion EMS devices

........................................................................................................................ 103.1 To install a thermostat

................................................................................................................................................ 11

3.1.1 Step-by-step procedure

................................................................................................................................................ 12

3.1.2 Thermostat dimensions

................................................................................................................................................ 13

3.1.3 To mount a thermostat

................................................................................................................................................ 14

3.1.4 To wire a thermostat

....................................................................................................................................... 15

3.1.4.1 Low voltage terminal block (12 pole; 3.5mm spacing)

....................................................................................................................................... 16

3.1.4.2 High voltage terminal block (8 pole; 5.0mm spacing)

....................................................................................................................................... 17

3.1.4.3 Switch output

....................................................................................................................................... 17

3.1.4.4 Proportional output

....................................................................................................................................... 18

3.1.4.5 Extra input

....................................................................................................................................... 19

3.1.4.6 Wired door switch

....................................................................................................................................... 20

3.1.4.7 Outputs N, L, RV, Y and W

....................................................................................................................................... 22

3.1.4.8 More about live output

....................................................................................................................................... 23

3.1.4.9 Fan outputs

....................................................................................................................................... 23

3.1.4.10 Connection example for floating valve

........................................................................................................................ 24

3.2 To install an RF door switch

................................................................................................................................................ 24

3.2.1 RF door switch dimensions

................................................................................................................................................ 25

3.2.2 RF door switch magnet dimensions

................................................................................................................................................ 25

3.2.3 Wall-mounted casing

.................................................................................................264. To set up a thermostat profile

........................................................................................................................ 264.1 General

........................................................................................................................ 27

4.2 HVAC

................................................................................................................................................ 28

4.2.1 Heating

....................................................................................................................................... 28

4.2.1.1 2-pipe fan coil with automatic switching

....................................................................................................................................... 29

4.2.1.2 Proportional

....................................................................................................................................... 30

4.2.1.3 Floating valve

................................................................................................................................................ 31

4.2.2 Cooling

....................................................................................................................................... 31

4.2.2.1 2-pipe fan coil with automatic switching

....................................................................................................................................... 32

4.2.2.2 Proportional

....................................................................................................................................... 33

4.2.2.3 Floating valve

................................................................................................................................................ 34

4.2.3 Consumption

........................................................................................................................ 34

4.3 Fan

ASSA ABLOY Hospitality 66 8003 016-3

........................................................................................................................ 35

4.4 Limits

........................................................................................................................ 37

4.5 Timeout

........................................................................................................................ 37

4.6 Deadband

........................................................................................................................ 38

4.7 Misc

.................................................................................................435. To commission the system

........................................................................................................................ 435.1 To join the thermostat to the network

........................................................................................................................ 45

5.2 To commission when thermostat controller is not used

.................................................................................................476. To check the installation

........................................................................................................................ 476.1 To check diagnostics

........................................................................................................................ 48

6.2 To test the in-room devices

.................................................................................................50Appendix A: Quick reference of technical data

.................................................................................................52

Appendix B: Firmware upgrade

.................................................................................................54

Appendix C: To set up a suite

........................................................................................................................ 54Introduction

........................................................................................................................ 54

To set up a suite with foyer door

................................................................................................................................................ 55

To enable 'suite with foyer door' in Visionline

................................................................................................................................................ 55

To set up the online network

................................................................................................................................................ 56

To initialize the master thermostat with suite settings

................................................................................................................................................ 57

To read out the thermostat status

................................................................................................................................................ 57

Online network tree

........................................................................................................................ 58

To set up a suite with two rooms (not foyer)

................................................................................................................................................ 58

VingCard door locks

....................................................................................................................................... 59

Visionline settings

....................................................................................................................................... 60

To set up the online network

....................................................................................................................................... 61

To initialize the master thermostat with suite settings

....................................................................................................................................... 61

Online network tree

................................................................................................................................................ 62

Other guest door locks than VingCard

....................................................................................................................................... 63

To set up the online network

....................................................................................................................................... 64

To configure the door switches

....................................................................................................................................... 64

Online network tree

........................................................................................................................ 65

To set up a suite with one door only

................................................................................................................................................ 66

To set up the online network

................................................................................................................................................ 67

To initialize thermostats with suite settings

....................................................................................................................................... 67

To initialize the thermostat in the first room of the suite

....................................................................................................................................... 68

To initialize the thermostat in the second room of the suite

................................................................................................................................................ 69

To read out the thermostat status

................................................................................................................................................ 69

Online network tree

........................................................................................................................ 70

More about how the suite works

................................................................................................................................................ 70

Suite with foyer

....................................................................................................................................... 70

Suite card

....................................................................................................................................... 71

Regular guest card

................................................................................................................................................ 71

Suite with one door only

ASSA ABLOY Hospitality 66 8003 016-3

.................................................................................................72Appendix D: Configuration in offline scenarios

........................................................................................................................ 73To add the lock to the in-room network

.................................................................................................77Appendix E: To install an external motion sensor

........................................................................................................................ 78Quick reference of technical data

........................................................................................................................ 78

Motion sensor dimensions

........................................................................................................................ 79

Motion sensor locations

.................................................................................................80Appendix F: Read more

.................................................................................................80

Revision history

ASSA ABLOY Hospitality 66 8003 016-3

FCC and ISED (IC) statements

FCC (Federal Communications Commission) statements

These devices comply with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) these devices may not cause harmful interference, and

(2) these devices must accept any interference received, including interference that may

cause undesired operation.

Important note: To maintain compliance with FCC´s RF exposure guidelines, this equipment

should be installed and operated with minimum distance 20 cm between the radiator and your

body. Use only the supplied antenna.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

These transmitters must not be co-located or operating in conjunction with any other antennas

or transmitters.

Changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

The concerned end product must be labeled to say 'Contains FCC ID: Y7V-683081118C1'.

The concerned end product must be labeled to say 'FCC ID: Y7V-TZENHV'.

ASSA ABLOY Hospitality 66 8003 016-3

ISED (IC) statements

These devices comply with Industry Canada licence-exempt RSS standard CAN ICES-3 (B)/NMB-3(B) B.

Operation is subject to the following two conditions:

(1) these devices may not cause interference, and

(2) these devices must accept any interference, including interference that may cause undesired

operation of the devices.

Les présents appareils sont conformes aux CNR d’Industrie Canada applicables aux appareils radio

exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:

(1) les appareils ne doivent pas produire de brouillage, et

(2) l’utilisateur des appareils doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le fonctionnement.

Important note: To comply with Industry Canada RF radiation exposure limits for general population,

the antennas used for these transmitters must be installed such that a minimum separation distance

of 20 cm is maintained between the radiator (antenna) and all persons at all times and must not be

co-located or operating in conjunction with any other antenna or transmitter.

Under Industry Canada regulations, these radio transmitters may only operate using an antenna of a

type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential

radio interference to other users, the antenna type and its gain should be so chosen that the equivalent

isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

These radio transmitters IC9514A-683081118C1 and IC9514A-TZENHV have been approved by Industry

Canada to operate with the antenna types listed below with the maximum permissible gain and required

antenna impedance for each antenna type indicated. Antenna types not included in this list, having

a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with

these devices.

Name/Model Gain Impedance

Inverted F-antenna 3.0 dBi 50 ohm

The term "IC" before the equipment certification number only signifies that the Industry Canada

technical specifications were met.

Le terme "IC" devant le numéro de certification signifie seulement que les specifications techniques

Industrie Canada ont été respectées.

End product labeling

The radio module is labeled with its own IC Certification Number. If the IC Certification Number is not visible

when a module is installed inside another device, then the outside of the device into which the module is

installed must also display a label referring to the enclosed module. In that case, the final end product must

be labeled in a visible area with the following:

'Contains IC: 9514A-683081118C1'

'IC: 9514A-TZENHV'

ASSA ABLOY Hospitality 66 8003 016-3

1. Introduction

Energy is a large cost for hotels, and EMS (Energy Management System) is a way

of achieving energy savings in guest rooms. With the Orion EMS software option

to Visionline it is possible to

view the Orion EMS status of different rooms

modify the configurable parameters for a room/group of rooms/entire property)

provide alarm conditions

provide energy savings reports

provide preventative maintenance reports

This manual

describes how to install the Orion EMS (Energy Management System) option

and if applicable an Orion EMS client; see chapter 2

- for the Orion EMS features to be shown in the Visionline software, it is

necessary to install the Orion EMS option; follow the steps in section 2.1

- if the Orion EMS features should also be available in a separate client where

the operators do not see the "ordinary" Visionline items such as doors,

follow the steps in section 2.2; this requires that the Orion EMS option

has been installed in the Visionline software

describes how to install the Orion EMS devices; chapter 3

describes how to set up a thermostat profile; chapter 4

describes how to commission the Orion EMS devices in an online network;

chapter 5

Note: For daily operations when the system is in use, see Daily use manual Orion High

Voltage Thermostat. In that document, more information about SysMon (System Monitor)

features is also found. For more information about the Orion Service software, see Quick

reference guide Orion Service.

A main task for Orion EMS is to determine whether or not a guest room is physically

occupied. When a room is not occupied, Orion EMS controls the HVAC (Heating

Ventilation and Air Conditioning) systems based on the configurable settings of

the system. The items used together with Orion EMS are:

digital thermostat Orion High Voltage Thermostat; in the rest of this document

simply called 'thermostat'

motion sensor

Note: The thermostat has a built-in motion sensor, but in some cases

(depending on the location of the Orion High Voltage Thermostat in the room)

it can be necessary to use an external motion sensor in addition.

door monitoring device; lock, switch

gateway (the same as is used for online doors; requires the Online option which

is also installed according to section 2.1)

Note: The gateway is not used in offline scenarios; see Appendix D for details.

Note: For each room number, it is possible to have

one wired thermostat

up to five motion sensors

up to five door switches

Note: The best conditions for Orion EMS are obtained if also the locks are online and

commissioned to the same online network as the thermostat and the motion sensor.

ASSA ABLOY Hospitality 66 8003 016-3

2. To install the software

2.1 To install a Visionline option

If the Orion EMS option (and Online option) has been ordered together withthe

Visionline software, it is included in the license code and will be set in the software

when the license code is entered. If the option(s) should be added to the system at

a later occasion, when the license code has already been entered and system ID is

therefore set, an option code is used instead. Several software options can be included

in one option code. An operator with the authority to handle option codes must be

logged on. Normally, options are set by the system manager or the distributor.

When ordering the option, the system code must be communicated to the

ordering department:

1. Double click on System settings under the Reports tab in the navigation window

of Visionline. System settings is available even if you are not logged on.

2. Communicate your system code to the order department; see order

acknowledgement for phone number and e-mail address. The system code

can also be entered in the Ordering web page when making the order.

To install an option:

1. Go to Tools/Option code

in Visionline.

2. Enter the option code and click Apply

Figure 1

2.2 To install an Orion EMS client

If there should be a separate Orion EMS client (see chapter 1 for more information),

this is installed according to the ReadMe file for the applicable operating system.

The ReadMe files are found on the Orion EMS software CD.

2.2.1 To start an Orion EMS client

1. Click the Start button and go to Programs/Orion EMS/Orion EMS.

2. When requested, log on with the same user ID and password as for Visionline.

ASSA ABLOY Hospitality 66 8003 016-3

3. To install the Orion EMS devices

3.1 To install a thermostat

mportant: This thermostat directly controls high voltage circuits

and must be installed by a licensed electrician.

mportant: All local codes must be followed when installing this thermostat.

The thermostat will control a variety of HVAC systems and the installation will

vary based on the type of system to which it is installed.

Figure 2

The master controller of the in-room system is the thermostat, shown in Figure 2.

To the guest, this device appears and operates as a standard digital thermostat;

however, this device also receives entry and exit information from the door lock

or switch as well as motion detected information from the motion sensor. This

information is used to determine the occupancy status of the room and implement

energy savings strategy based on this information. The guest operates the

thermostat, which communicates directly with the Visionline software/Orion EMS

software and the devices within the room.

Andere Handbücher für Orion

Inhaltsverzeichnis

Andere Assa Abloy Thermostat Handbücher

Assa Abloy

Assa Abloy Orion Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung