Associated Electrics RC8.2e Bedienungsanleitung
9/11
2
:: Introduction
:: KIT Features :: RC8.2 Platform Features
:: Other Helpful Items
Associated Electrics, Inc.
26021 Commercentre Dr.
Lake Forest, CA 92630
http://www.TeamAssociated.com · http://www.RC10.com · http://twitter.com/Team_Associated · http://bit.ly/AEonFacebook
Customer Service
Tel: 949.544.7500
Fax: 949.544.7501
Thank you for purchasing this Team Associated product. This manual contains instructions and tips for building and maintaining your new
RC8.2e Factory Team, 1/8 scale racing buggy. Please take a moment to read through it an familiarize yourself with these steps as they will help
you to understand each component’s function and show you some tips for getting the most out of your RC8.2e Factory Team build experience.
• New Factory Team blue aluminum sliding motor mount allows for quick and
easy removal of motor and center diff
• Factory Team 3mm lengthened 7075 hard anodized chassis
• Newly designed suspension arms feature centerline shock mounts and
optimized anti-roll bar position
• Factory Team 16mm ‘Big Bore’ hard anodized threaded shocks with 4mm
titanium nitride coated shafts
• Factory Team 5mm 7075 aluminum low-CG shock towers with optimized
geometry
• Factory Team 7075 blue aluminum pivot plates
• Factory Team 7075 blue aluminum steering knuckles
• Factory Team 7075 aluminum axles and gearbox input cups
• Factory Team 7075 blue aluminum chassis top plate and lightweight steering
posts
• Factory Team lightweight diff outdrives and ring gears
• JConcepts Punisher Body and Factory Team 83mm wheels
• JConcepts Illuzion wing with NEW Factory Team low-CG wing mount
• 3.5mm light CVA drivetrain with protective boots on center and rear drives
• Factory Team shock and differential fluids included
• 4.30:1 ratio gearboxes
• 43T diff ring and 10T pinion for increased punch and durability over
conventional buggy ratio gearboxes
• Caster blocks adjust 14, 16, or 18 degrees with molded inserts
• 3.5mm light CVA drivetrain with protective boots on center and rear joints
• Rubber sealed bearings
• Front and rear hubs use large 15mm x 24mm rubber sealed bearings
(used on the inside)
• 14 other 8mm x 16mm bearings throughout the car
• Steel alloy turnbuckles
• Molded suspension pivot bushings for adjustable pivot height
• Blue Aluminum hexes and nylon locking wheel nuts
• Large speed control mounting area raised off of chassis to allow for easy
screw mounting of common speed controllers.
• Speed control mounting area includes convenient switch-mounting boss.
• Utilizes 3 hook-and-loop straps to secure LiPo batteries into battery tray.
• Molded battery tray supports 7.4-14.8V battery packs with room for foam
pads.
• Accepts 2S, 3S, 4S, LiPo battery packs:
#628 Reedy LiPo 5500 mAh 7.4V 60C (2),
#685 Reedy LiPo 5000 mAh 7.4V 40C w/connector (2),
#709 Reedy LiPo 5000 mAh 7.4V 35C w/connector (2).
• Sealed receiver box for electronics placement.
• Receiver, servo, and battery tray remove from vehicle in one piece for easy
maintenance and cleaning.
• Convenient wire routing keeps critical electronic wires out of drivetrain
components and simplifies disassembly.
Your RC8.2e FT kits comes with the latest components used by our factory race team to win races.
However the following components are necessary to complete the build:
• 2 channel radio/transmitter set with switch – FM/PCM/2.4GHz recommended
• Transmitter batteries (#302, 303 recommended)
• 1/8 Scale Specific Speed Control, Motor, and pinion (see motor manufacturer’s gearing recommendations for correct pinion size).
• Plug Extension (depending on ESC)
• High Torque Steering Servo (AE Part # 29167)
• 1/8th scale buggy tires • CA (Cyanoacrylic) glue (#1597 recommended)
• Polycarbonate specific spray paint or polycarbonate specific bottled paint and airbrush
• Needle nose pliers • Hobby knife • Reamer/hole punch • Ride Height Gauge (#1449 recommended)
• Silicone Shock Fluid / Differential Fluid (Refer to catalog for complete listings)
• Body Scissors (AE Part # 1737) • Wire cutters • Soldering Iron • FT Threadlock (#1596)
• FT Hex Wrenches (AE Part # 1541, 1655) • Multi Tool (AE Part #7494) • FT Turnbuckle Wrench (#89240)
• FT Nut Drivers (AE Part #1561, 1663-1668) • Calipers or a Precision Ruler • Green Slime shock lube (AE Part # 1105)
:: Additional Items Needed
3
Bag L
32................Wheels, Tires, and Body Install
32................Building Tips
33................Chassis Tips
33................Front End Tips
34................Rear End Tips
35................Droop Settings
36-45.........Catalog
45................Contact Info
46................Notes
47.................Setup Sheet “Kit Setup”
48................1:1 Hardware “Fold Out
49................Setup Sheet “Blank”
50................Back Cover
:: Table of Contents
:: Notes
This symbols indicates a
special note or instruction
in the manual.
!There is a 1:1 hardware foldout page in the back
of the manual. To check the size of a part, line
up your hardare with the correct drawing until
you find the exact size. Each part in the foldout
has a number assigned to it for ordering
replacement parts.
1....................Cover
2....................Introduction
3....................Table of Contents
BAG A & AA
4....................Chassis Assembly
BAG B
4-5...............Steering Assembly
Bag C & CC
6-9...............Front, Rear, and Center
Differential Assembly
Bag D & DD
9-11.............Front Bulkhead Assembly
Bag E & EE
11-14..........Front Suspension Assembly
Bag F & FF
15-16..........Rear Bulkhead Assembly
Bag G & GG
16-19..........Rear Suspension Assembly
Bag H
20-21..........Wing Assembly
Bag I & II
21-23.........Center Bulkhead Assembly
Bag J & JJ
24-26.........Shock Assembly
Bag K
27-31..........Radio Tray Assembly
Associated Electrics, Inc.
26021 Commercentre Dr.
Lake Forest, CA 92630
http://www.TeamAssociated.com · http://www.RC10.com · http://twitter.com/Team_Associated · http://bit.ly/AEonFacebook
Customer Service
Tel: 949.544.7500
Fax: 949.544.7501
4
:: Chassis Assembly - Bag A & AA
:: Chassis Assembly (cont.) - Bag A & AA
:: Steering Assembly - Bag B
89485
RC8B
aluminum
steering
posts
89476
FT RC8B
+3mm
chassis
89552
RC8.2
side
guards
25201
3x8mm
fhcs
89214
4x12mm
fhcs
89117
Diff
shim
89014
Steering
rack post
89161
5x8mm
bearing
89016
Servo
saver
spring
89016
Servo
saver
retainer
89016
Servo
saver
bolt
89015
Servo
saver
arm
89015
Servo
saver
bellcrank
x4
x2
x2
x2
x4
x2
x2
gap setting:
7mm
!
#1596
thread lock
#1596
thread lock
#6588
black grease
#1596
thread lock
Note: cut fuel
tubing brace off of
the left side guard.
!
5
:: Steering Assembly (cont.)- Bag B
:: Steering Assembly (cont.)- Bag B
:: Steering Assembly (cont.)- Bag B
89455
3x22mm
fhcs
31404
6x10mm
bearing
89075
RC8
steering
ballstuds
89077
Flanged
pivot ball
89242
Steering
drag link
25202
3x10mm
fhcs
89074
Steering
eyelet
25215
M3
locknut
89234
Aluminum
top plate
(blue)
89011
Front body
mount
89455
3x22mm
fhcs
89258
Front chassis
brace
(plastic)
29mm
89526
50mm steel
turnbuckle
x2
x2
x2
x4
x2
x2
#1596
thread lock
#1596
thread lock
#1596
thread lock
Smooth edge towards
drivers side!
Build Two
!
note the direction
of the body post
during installation.
!
89214
4x12mm
fhcs
89209
3x18mm
fhcs
x2
25215
M3
locknut
6
:: Front/Rear Differential Assembly - Bag C & CC
:: Front/Rear Differential Assembly (cont.) - Bag C & CC
:: Front/Rear Differential Assembly (cont.) - Bag C & CC
Diff outdrive
differences
!
89120
Diff
washer
89121
Diff
O-Ring
89120
Diff
outdrive
pin
89120
Sun gear
89120
Spider
gear
assembly
25236
8x16mm
bearing 89477
Light
outdrives
(front, long)
89121
Diff
O-Ring 89478
Light
outdrives
(rear, short)
89115
Diff
housing
x2
Align pin with
groove in sun gear
!
#6588
black grease
#6588
black grease
Center Diff
Outdrive
Front Diff
Outdrive
(long)
Rear Diff
Outdrive
(short)
7
:: Front/Rear Differential Assembly (cont.) - Bag C & CC
:: Front/Rear Differential Assembly (cont.) - Bag C & CC
:: Front/Rear Differential Assembly (cont.) - Bag C & CC
89120
Diff
outdrive
pin
89116
Diff
gasket
25236
8x16mm
bearing
89494
Light diff
ring gear
89477
Light
outdrives
(front, long)
89121
Diff
O-Ring
89121
Diff
O-Ring
89478
Light
outdrives
(rear, short)
Align pin with
groove in sun gear
!
#6588
black grease
#6588
black grease
#6588
black grease
89120
Sun gear
O-Ring
#6588
black grease
89120
Diff
washer
x2
89208
3x14mm
fhcs
x4
Diff fluid
5,000cst
#5453
Tighten screws
evenly and firmly.
Fill with diff fluid to
top of gears.
!
!
Build
front and
rear diffs!
!
8
:: Center Differential Assembly - Bag C & CC
:: Center Differential Assembly (cont.) - Bag C & CC
:: Center Differential Assembly (cont.) - Bag C & CC
Align pin with
groove in sun gear
!
89120
Sun gear
89115
Diff
housing
25236
8x16mm
bearing
89121
Diff
O-Ring
89119
Diff
outdrives
(center)
89120
Diff
washer
x2
89121
Diff
O-Ring
89519
Plastic
spur gear
(46T)
89119
Diff
outdrives
(center)
25236
8x16mm
bearing
89121
Diff
O-Ring
#6588
black grease
#6588
black grease
#6588
black grease
89120
Diff
outdrive
pin
89120
Spider
gear
assembly
9
:: Center Differential Assembly (cont.) - Bag C & CC
:: Center Differential Assembly (cont.) - Bag C & CC
:: Front Bulkhead Assembly - Bag D & DD
Align pin with
groove in sun gear
!
89120
Sun gear
89116
Diff
gasket
#6588
black grease
#6588
black grease
89120
Diff
outdrive
pin
89120
Diff
washer
x2
89121
Diff
O-Ring
89103
Center CVA
bone
(front)
89557
Pin
retainer
O-ring
89106
CVA
u-joint
coupler
89106
CVA pin
89286
Gearbox
input cup
(aluminum)
89557
Pin
retainer
boot
89208
3x14mm
fhcs
x4
Tighten screws
evenly and firmly.
Fill with diff fluid to
top of gears.
Input cup has additional holes
for crosspin to extend the life of
the input cup.
!
!
!
!
Diff fluid
5,000cst
#5453
:: Front Bulkhead Assembly (cont.) - Bag D & DD
:: Front Bulkhead Assembly (cont.) - Bag D & DD
:: Front Bulkhead Assembly (cont.) - Bag D & DD
10
25236
8x16mm
bearing
89474
3x22mm
shcs
89224
3x16mm
shcs
89454
3x12mm
shcs
25215
M3
locknut
89221
5x4mm
setscrew
89481
Low
B-Plate
89538
RC8.2 front
shock tower
(aluminum)
89472
Front
bulkhead
spacer
89017
Inner
gearbox
89114
Diff pinion
gear
89117
Diff
shim
89017
Outer
gearbox
x2
x2
x2
x2
x4
x4
Key setscrew onto
flat side of shaft.
Tighten with no
endplay.
!
#1596
thread lock
!
!
Diff shims
installed to diff,
diff installed to
gearbox.
!
Wrap boot over the O-Ring.
!
!
Andere Handbücher für RC8.2e
1
Inhaltsverzeichnis
Andere Associated Electrics Motorisiertes Spielzeugauto Handbücher
Associated Electrics
Associated Electrics RC10 T4.2 Bedienungsanleitung
Associated Electrics
Associated Electrics Factory Team TC4 Bedienungsanleitung
Associated Electrics
Associated Electrics RC10GT Bedienungsanleitung
Associated Electrics
Associated Electrics Rival MT10 Bedienungsanleitung
Associated Electrics
Associated Electrics RC10T Bedienungsanleitung
Associated Electrics
Associated Electrics RC10F6 Bedienungsanleitung
Associated Electrics
Associated Electrics 20100 RC18T Bedienungsanleitung
Associated Electrics
Associated Electrics RC10TC6 Factory Team Bedienungsanleitung
Associated Electrics
Associated Electrics Team Associated RC12R5.2 Factory Team Bedienungsanleitung
Associated Electrics
Associated Electrics TEAM ASSOCIATED RC10B4 Bedienungsanleitung
Associated Electrics
Associated Electrics Reflex 14B Bedienungsanleitung
Associated Electrics
Associated Electrics RC12l4 Kit Bedienungsanleitung
Associated Electrics
Associated Electrics RC10 Worlds Car Kit Bedienungsanleitung
Associated Electrics
Associated Electrics RC8B Factory Team Bedienungsanleitung
Associated Electrics
Associated Electrics RC8B3.2e Bedienungsanleitung
Associated Electrics
Associated Electrics TEAM ASSOCIATED RC10B4 Bedienungsanleitung
Associated Electrics
Associated Electrics TEAM ASSOCIATED RC10B4 Bedienungsanleitung
Associated Electrics
Associated Electrics RC10L2 Road Series Bedienungsanleitung
Associated Electrics
Associated Electrics RC8.2e Bedienungsanleitung
Associated Electrics
Associated Electrics RC18T Bedienungsanleitung
Associated Electrics
Associated Electrics Mini MGT 3.0 Bedienungsanleitung
Associated Electrics
Associated Electrics RC10T2 Installations- und Betriebshandbuch
Associated Electrics
Associated Electrics SC10 4x4 Bedienungsanleitung
Associated Electrics
Associated Electrics Ready-To-Run RIVAL MT8 Bedienungsanleitung
Beliebte Motorisiertes Spielzeugauto Handbücher anderer Marken
Eduard
Eduard Krupp Protze 6x4 1/48 Bedienungsanleitung
New Bright
New Bright 61072UEP Bedienungsanleitung
Team Durango
Team Durango DEX410v5 Bedienungsanleitung
Jamara
Jamara Mercedes Actros Muldenkipper 2,4 GHz Bedienungsanleitung
PLAYMOBIL
PLAYMOBIL 9536 Bedienungsanleitung
Atomic
Atomic BZ3 Bedienungsanleitung
