Astra P-8 Bedienungsanleitung

Astra P-8

USER MANUAL

CONTACT INFORMATION:

MACHINERY PLANT“ASTRA”AB

ULONŲ G. 33, LT62161 ALYTUS, LITHUANIA

TEL.: +370 315 75449

EMAIL: INFOASTRA.LT

WWW.ASTRAGAS.LT

ASTRA MACHINERY PLANT AB • ANNO 1929

TABLE OF CONTENTS

1. SAFETY REQUIREMENTS ..................................................................................................4

2. INTENDED USE ...............................................................................................................4

3. TECHNICAL DESCRIPTION ................................................................................................5

• Components of the Stove ...........................................................................................................................................5

• Technical Features......................................................................................................................................................6

• Circuit Diagram ..........................................................................................................................................................7

4. FUEL.............................................................................................................................8

5. PLACEMENT, ASSEMBLY AND INSTALLATION ......................................................................8

• Considerations for Placement of the Stove.................................................................................................................8

• Patterns of Installation...............................................................................................................................................9

6. TRANSPORTATION, STORAGE, UNPACKING.......................................................................12

7. KINDLING....................................................................................................................12

8. OPERATION..................................................................................................................13

• Display and the Remote Control...............................................................................................................................13

• Navigating the Menu ...............................................................................................................................................14

• Menu Structure........................................................................................................................................................15

• Setting the Clock......................................................................................................................................................15

• Setting the Weekly Timer Programs .........................................................................................................................15

• Setting the Room Temperature ................................................................................................................................17

• Output Power Regulation.........................................................................................................................................17

• Regulation of the RoomVentilator...........................................................................................................................18

• Setting the Fuel Options...........................................................................................................................................18

• Modifying the Setup Options ...................................................................................................................................18

9. MAINTENANCE AND CLEANING.......................................................................................19

• Cleaning Schedule....................................................................................................................................................19

• Exterior Surfaces Cleaning........................................................................................................................................20

• Heat Exchanger Tubes Cleaning ...............................................................................................................................20

• Ashes Drawer Cleaning.............................................................................................................................................20

• Combustion Chamber Cleaning................................................................................................................................20

• Fire Pot Cleaning......................................................................................................................................................21

• Vermiculite Plates Cleaning......................................................................................................................................21

• FlameTrape Cleaning...............................................................................................................................................21

• Flue Channels Cleaning............................................................................................................................................22

• Pellet Hopper Protection against Burning ................................................................................................................23

• Protective Handle.....................................................................................................................................................23

10. TROUBLESHOOTING....................................................................................................23

• Alerts .......................................................................................................................................................................24

• Errors........................................................................................................................................................................25

• Power Supply Failure................................................................................................................................................25

11. WARRANTY TERMS AND CONDITIONS............................................................................26

12. ACCEPTANCE CERTIFICATE............................................................................................26

SELLING CARD .................................................................................................................26

STOVE INSTALLATION PROTOCOL........................................................................................27

WARRANTY AND POST-WARRANTY REPAIR CARD.................................................................27

DECLARATION OF CONFORMITY .........................................................................................28

Astra P-8 USER MANUAL

1. SAFETY REQUIREMENTS

The stove must be installed and tested by qualied personnel instructed and authorized by Astra representing company. Please carefully

read this use and maintenance manual before installing and putting the stove into operation. For further information, please contact your

local Astra dealer.

The exploitation of the stove must comply with national and European regulations. During the operation of the stove, strictly observe the

following safety requirements:

• The stove is designed to be fuelled exclusively with high-quality wood pellets with a diameter of 6 mm as described in chapter 4 of

this user’s guide;

• Do not attempt to operate the stove using traditional wood!

• To avoid potential re hazards, the stove should not be used for incineration of household garbage under any circumstances!

• Before placement of the stove, check with local building codes to assure that the installation will comply with applicable technical

and legal norms;

• Installation of the stove and the electrical connections, initial function checks and adjustments must be performed by qualied and

authorized personnel;

• Improperinstallationorpoor maintenance(not compliantwithinstructionsofthisusermanual)mayendangersurroundingproperty

and/or human health. In the case of the aforementioned product misuse, Astra is exempted of civil and criminal responsibility;

• When linking the stove to a ue, all ducting works must be completed prior to connecting to the electrical supply;

• There must be sucient air circulation in the room where the stove is installed;

• To avoid a potential re hazard, never open the door of the stove while burning goes on!

• To assure maximum safety while using your stove be sure to follow all use and maintenance operations as described in this manual;

• This pellet stove should not be operated by people with physically or mentally challenging conditions, or who have no experience

using such devices, unless they are under the direct guidance of a qualied and responsible person;

• The stove must not be operated or played with by children;

• To avoid a potential re hazard, never operate the stove with its door open, or if the door glass is cracked;

• While the stove is in operation, its surfaces, the glass, the door handle and ue ducting become very hot. Use extreme caution and

be sure to use heat-resistant personal protective equipment when touching these components;

• Kindle the stove only after the daily inspection described in this manual has been performed;

• To avoid a potential re hazard, do not dry laundry on or near the stove. Keep clothes and other ammable objects at a sucient

distance from the stove;

• For greatest safety, carefully follow the cleaning and maintenance schedule listed in table on page 19 of this manual;

• Do not turn o the stove by unplugging it from the electrical supply;

• Do not clean the stove until a body and ashes have cooled down completely;

• Do not remove the protection grid out of the pellet hopper;

• To avoid the risk of electric shock, do not touch the stove while barefoot and wet;

• The stove must be connected to the electrical supply with an easily accessible plug;

• Do not modify the design of the stove;

• To repair the stove, use only original replacement parts supplied by the manufacturer.

• Do not wait for components of the stove to become totally worn before replacing them. Replace a worn component before it

is completely disabled to prevent possible accidents caused by the sudden breakdown of the components. Perform periodic

maintenance checks as described in chapter 8 of this manual.

• In the case of a chimney re: 1) call re department immediately, 2) disconnect the stove from the electrical supply, 3) block an air

supply to the stove if possible.

This stove has been designed to function in all climatic conditions. In the circumstances of particularly adverse weather (high wind,

freezing), safety systems may automatically engage and switch o the stove. If this occurs, please contact technical assistance for

directions. In any case, do not disable the safety systems.

2. INTENDED USE

The Astra pellet stove is an eective home heating appliance intended to heat a room with hot blown air. It simultaneously performs

the function of a replace as you view the re through the temperature-resistant glass. It can be installed in all kinds of residential spaces

where people work, relax or spend their time. In order to reduce any possible danger to human health and property, the stove Astra is

equipped with special safety devices. For added convenience, control of the appliance can be fully automated. Once programmed, the

Astra pellet stove is capable of maintaining dierent heating output levels at a variety of pre-set time intervals over the course of a day,

seven days a week; it sustains a set air temperature in the room with the help of an integrated temperature sensor; and it even makes the

Astra P-8 USER MANUAL

decision to stop the appliance if unfavourable safety conditions arise: draught of the ue disappears or has fallen substantially, the door

of the stove is opened during the operation; the pellet hopper heats up; or other potentially harmful events happen. In addition, the stove

can be operated by a remote control unit (available by special order).

Only 6 mm wood pellets are used for fuelling the Astra stove. The appliance is not designed to be operated with any other kind of fuel

because other fuels leave a greater content of ashes and slag.The latter then will cause the re pot to clog, activating emergency stop of

the appliance. In order to enjoy the pleasant heat of the stove without unpleasant interruptions, use only high-quality 6 mm wood pellets

and keep the combustion chamber, re pot and ue channels of the stove cleaned at all times.

3. TECHNICAL DESCRIPTION

• COMPONENTS OF THE STOVE

Wood pellets from the hopper 4 are transported by means of the auger 5 into the re pot 19 (Fig. 1).The electrical igniter 18 kindles

the pellets. The ame and hot ue gases rise to stainless steel heat exchanger 1, descend afterwards by two lateral ue channels

surrounding the combustion chamber and are released with help of exhaust fan 16 into the chimney connection pipe 13. The room

ventilator 7 draws air from surroundings and blows it through the hot heat exchanger tubes 1, thus supplying heat.

1 32

Fig. 1 Components of the stove

1. Stainless steel heat exchanger; 2. Flame trap; 3. Display unit; 4. Pellet hopper; 5. Auger; 6.Temperature sensor of the hopper safety

thermostat; 7. Room ventilator; 8. Gear motor; 9. Air intake pipe; 10. Air intake ow sensor; 11. Control board; 12. Hopper safety

thermostat; 13. Smoke exhaust pipe; 14. Room temperature sensor; 16. Exhaust fan; 17. Smoke temperature sensor; 18. Electrical

igniter; 19. Fire pot; 20. Heat exchanger tubes scraper.

Astra P-8 USER MANUAL

• TECHNICAL FEATURES

Our product is manufactured in accordance with the following directives:

2006/95/EC– Low voltage directive;

2006/42/EEC – Machinery directive;

2004/108/EEC– Electromagnetic compatibility directive;

89/106/EEC – Construction products directive.

The following standards were applied for the Astra P-8 pellet stove:

EN 14785 – Residential space heating appliances red by wood pellets;

EN 60335-1 – Safety of household and similar electrical appliances;

EN 60335-2 – Safety particular requirements for fuel burning appliances having electrical connections;

EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3 – Electromagnetic compatibility.

Model of the stove Astra P-8

Heat transfer medium Air

Rated heating output 8.5 kW

Reduced heating output 2.7 kW

Period of complete burning of one full fuel load, min-max 11-30 h

Weight 80 kg

Height 940±10 mm

Width 453 mm

Depth 483 mm

Flue gas pipe diameter 80 mm

Air intake pipe diameter 35 mm

Capacity of the pellets hopper 16.5 kg

Fuel: wood pellets 6 mm

Hourly fuel consumption, min-max 0.5-1.9 kg

Heated space volume 180 m3

CO emission level (at 13% O2)Reduced output 0.012 %

Rated output 0.037 %

Eciency Reduced output 91,4 %

Rated output 85 %

Minimum chimney draught Reduced output 8 Pa

Rated output 10 Pa

Average smoke temperature Reduced output 100 °C

Rated output 240 °C

Volume of the ue gases ow Reduced output 3.1 g/s

Rated output 6.1 g/s

Average electrical energy consumption Operation stage 40-80 W

Kindling stage 300 W

Rated voltage 230 V

Rated frequency 50 Hz

Astra P-8 USER MANUAL

t°C t°C

O01 O02 O03 O04 I01

LPE N

T02 T01

GND I02 T03

GND F03 F01/02 +VIO

T1 T2F1

S1 M2 M3 SK1

1 2 3 457

1234

12P

CN5 CN7 CN9

CN4 CN10 CN8

CN1

8910 11

6.3mm

0.5-1.5mm²

4.8mm

0.5-1.5mm²

ø4mm

0.5-1.5mm²

ø5mm

0.5-1.5mm²

ø4mm

4-6mm²

6.3mm

0.5-1.5mm²

15 1816 17

LCD

12 13 14

Fig. 2 Circuit diagram of the stove.

• CIRCUIT DIAGRAM

The electrical circuit diagram of the stove is presented below in Fig. 2. The denomination of elements is as follows:

T1 – Room temperature sensor; T2 – Smoke temperature sensor; B1– Electrical (250 W) igniter; M1 – Fan 1- smoke exhaust fan;

M2 – Fan 2- room ventilator; M3 – Auger gear motor; SK1– Pellet hopper safety thermostat; F1 – Air ow sensor.

User interface

Service socket

Mainboard

Green

Braun

White

Green

Red

Blue

Black

Battery

Fuse: T 4A

Astra P-8 USER MANUAL

4. FUEL

Use 6 mm diameter high quality pellets to fuel a stove. When purchasing pellets, make sure that they comply with one of the bellow

listed standards and their packing is marked correspondingly:

EN 14961-2, class A1,

ENplius-A1,

DinPlius.

Wood pellets of lower quality could also be used for fueling but the stove‘s operation in that case will not be stable because of the

fuel quality. Do not use the non-wood pellets for fueling the stove.

Parameters of pellets according to EN14961 standard, class A1:

Length 3.15-40 mm

Diameter D06 6 +/-1 mm

Weight BD600 > 600 kg/m3

Caloric value Q4.6 > 4.6 kWh/kg

Residual humidity M10 < 10 %

Ashes content A0.7 < 0.7 %

Fines content F1.0 < 1 %

Do not put a bag of pellets on the surface

of the stove during the loading operations!

The pellets must be transported and stored in a dry place. They

swell after contact with moisture and become unsuitable for

ring. The pellets must always be protected against humidity

both during transportation and storage.

Astra strongly advices using the 6 mm diameter

wood pellets for fuelling the Astra stove.

5. PLACEMENT, ASSEMBLY AND INSTALLATION

•CONSIDERATIONS FOR PLACEMENT OF THE STOVE

The residential space considered for the placement of the stove must meet the following technical requirements:

• Pipe connection to a chimney of 8 cm diameter must be installed;

• The supply of air for combustion must be assured either from other ventilated rooms through opening of at least 100 cm2, or directly

from outside through the 35 mm air intake pipe. The design of grilles mounted on the opening shall exclude blocking of the air

supply;

• The permanent humidity of air in the room must not exceed 80%;

• A connection of electrical supply of 230V, 50 Hz must be installed;

• CE compliant earthing system must be present.

The placement of the stove is important for the successful heating of the room. Please, take into account the next considerations

before deciding where to place the stove:

• If the supply air needed for combustion is to be taken from another room, that room must be ventilated or have air inow from

outside. The stove can consume up to 40 m3of air per hour at maximum, so the sucient amount of it must be supplied either from

outside or from another inner space of a house;

• The stove cannot be placed in the bathroom, near a shower or bath, or in another space with high humidity level;

• If wooden ooring is present in the desired place of installation, rst cover it with a protective re-resistant plate made from steel,

glass or ceramic;

• The room in which the stove is to be placed must have at least 30 m3of volume;

• Make sure that a oor base on the place of installation has a sucient holding capacity to bear weight of the stove;

• It is recommended to place the stove in the largest room of a house or in a room which has good connectivity with other inner spaces

of a house, so that the maximum circulation of heat would be ensured;

• Connection to the electrical supply must be done through a grounded socket. If the cable of the stove is not long enough to reach the

nearest socket, use a grounded extension cable;

• If another heating installation (stove, replace) without autonomous air supply is present in the room of considered placement of the

Astra stove, evaluate, whether there would be a sucient air supply for both appliances working simultaneously and if that kind of

double installation is allowed by local technical regulations;

The stove must be installed and assembled only by qualied personnel.

• The stove must be placed so that easy access to it and to a chimney is ensured.

Astra P-8 USER MANUAL

• The joints of chimney pipes must have temperature resistant gaskets in order to ensure sucient tightness of the connections;

• A separate chimney is mandatory for the Astra stove installation. It is not permitted to connect the stove to a shared ue;

• The connection of the air intake tube of the stove to an outside is not obligatory. If the air for combustion is taken from inner spaces

of the house, these must be ventilated so that up to 40 m3of air inow is ensured;

• Do not use a mesh on the top of a chimney because it can reduce draught and cause problems for the stove functioning;

• When designing the chimney piping for the stove, do not use more than 3 pieces of 90° bends. The biggest distance between the

adjacent bends must not exceed 2,5 meters horizontally;

• A minimum distance of 10 cm should be left from the rear stove panel to the wall. A 20 cm free space must be left from lateral sides

of the stove and 150 cm- from the front side.

Fig. 3 Chimney installed outside the house.

Yes

YES NO

FIG.6FIG.9

YES

FIG.10 FIG.5

FIG.8

YES YES

FIG.7

< 2500 mm

H > 4000 mm

H > 1500 mm

1 2

0,4 m

0,4 m 0,4 m

135°

Insulated ue

Chimney cap for rain protection

Insulated chimney tee with

condensation drain pipe

Fig. 4 Incorrect installation - with 90° bend as the rst connecting part.

YES NO

FIG.6FIG.9

YES

FIG.10 FIG.5

FIG.8

YES YES

FIG.7

< 2500 mm

H > 4000 mm

H > 1500 mm

1 2

0,4 m

0,4 m 0,4 m

135°

Ashes accumulate in the 90° bend

• PATTERNS OF INSTALLATION

A 90° bend should not be installed as the rst

connecting part – ashes would quickly obstruct a

passage for smoke causing unexpected problems

for draught of the ue (Fig 4).

This type of installation (Fig. 3) requires an

insulated ue, as the whole smoke pipe is

installed outside the house. A chimney tee with

an inspection cap and condensate drain pipe is

mounted in the lower part of the ue.

Astra P-8 USER MANUAL

YES NO

FIG.6FIG.9

YES

FIG.10 FIG.5

FIG.8

YES YES

FIG.7

< 2500 mm

H > 4000 mm

H > 1500 mm

1 2

0,4 m

0,4 m 0,4 m

135°

Fig. 5 Smoke pipe installed partly inside a house and partly inside an existing ue.

Yes

Chimney tee with a cap and a

peephole

45° bend, Ø 80 mm

Chimney cover plate

Airtight steel sheeting

YES NO

FIG.6FIG.9

YES

FIG.10 FIG.5

FIG.8

YES YES

FIG.7

< 2500 mm

H > 4000 mm

H > 1500 mm

1 2

0,4 m

0,4 m 0,4 m

135°

Fig. 6 Whole smoke pipe installed inside a house.

Yes

Chimney tee with a cap and a

peephole

Chimney cap for rain

protection

This type of installation (Fig. 5) does not require

an insulated ue as the smoke pipe is assembled

partly inside the house and partly inside an

existing ue. A chimney tee with a peephole cap

is installed in the lower part of the ue.

Please note the use of two 45° bends in order

to guarantee that ash falls into the chimney tee

with the cap and the peephole.

This type of installation (Fig. 6), does not require

an insulated ue, because the whole smoke pipe

is assembled inside a house. A chimney tee with a

peephole is mounted in the lower part of the ue.

Inhaltsverzeichnis

Andere Astra Herd Handbücher

Astra

Astra P-10 Bedienungsanleitung

Beliebte Herd Handbücher anderer Marken

Arada

Arada Cassette Stove Bedienungsanleitung

HearthStone

HearthStone Stowe DV 8321 Fehlerbehebungshandbuch

Cattara

Cattara FAMILY Bedienungsanleitung

Stanley

Stanley Argon F500 OVAL Bedienungsanleitung

Avalon

Avalon B-VENT Bedienungsanleitung

Nordpeis

Nordpeis Vega Bedienungsanleitung

Exquisit

Exquisit EKC601-5 Bedienungsanleitung

Stanley

Stanley Oisin Oil MK II Betriebsanleitung

Thermocet

Thermocet Brookfield S/CC Bedienungsanleitung

HASE

HASE delhi Bedienungsanleitung

Vermont Castings

Vermont Castings Intrepid 2 Bedienungsanleitung

Italiana Camini

Italiana Camini CLASSICA Kurzanleitung

Avalon

Avalon Vashon Avanti DVS FS Bedienungsanleitung

Spartherm

Spartherm ambiente a1 Bedienungsanleitung

Dimplex

Dimplex MCFSTV12AU Bedienungsanleitung

Warmlite

Warmlite WL46040 Bedienungsanleitung

Regency

Regency Ultimate U39E Series Kurzanleitung

Barton

Barton FH-AMP8745 Technisches Dokument