Asus Vintage P5945G Bedienungsanleitung

V-Series P5945G

ASUS PC (Desktop Barebone)

Installation Manual

2 Installation Manual

1394

Rear panel features

PS/2 mouse port

Cover screw

PS/2 keyboard port

Parallel port

Line In port

Voltage selector

Metal bracket lock

Power connector

VGA port

USB 2.0 ports

Line Out port

Microphone port

Expansion slot

metal brackets

Power supply fan

Chassis fan vents

LAN (RJ-45) port

Cover screw

Refer to the system user guide for installation details and other system

information from ASUS website.

Front panel features

5.25-inch drive

bay cover

Power button

USB 2.0 ports

Microphone port

3.5-inch drive bay

cover

Headphone port

Reset button

HDD LED

IEEE 1394 port

This V-series

provide V2/V3

two types of

front panel for

users to choose,

please refer to

your product

package for the

front panel type

you purchased.

3Installation Manual

Internal components

1. Front panel cover

2. 5.25-inch optical drive bays

3. Hard disk drive bay

4. Floppy disk drive bay

5. Power supply unit

6. CPU socket

7. DIMM sockets

8. ASUS motherboard

9. PCI Express x16 slot

10. PCI Express x1 slot

11. PCI slots

12. Metal bracket lock

Selecting the voltage

The system’s power supply unit has

a 115 V/230 V voltage selector

switch located beside the power

connector. Use this switch to select

the appropriate system input voltage

according to the voltage supply in your

area.

If the voltage supply in your area is

100-127 V, set the switch to 115 V.

If the voltage supply in your area is

200-240 V, set the switch to 230 V.

eSATA

4 Installation Manual

Removing the side cover and

front panel assembly

1. Remove the cover screws on the rear panel.

2. Pull the side cover toward the rear panel until its hooks disengage

from the chassis tabs. Set the side cover aside.

3. Locate the front panel assembly hooks, then lift them until they

disengage from the chassis.

4. Swing the front panel assembly to the right, until the hinge-like tabs

on the right side of the assembly are exposed.

5. Remove the front panel assembly, then set aside.

Air duct

Chassis tab holes

Installing a CPU

To prevent damage to the

socket pins, do not remove

the PnP cap unless you are

installing a CPU.

To install a CPU:

1. Locate the CPU socket on the motherboard.

2. Press the load lever with your

thumb (A), then move it to the

left (B) until it is released from

the retention tab. A

Load lever

Retention tab

5Installation Manual

3. Lift the load lever in the direction of

the arrow to a 135º angle.

4. Lift the load plate with your thumb

and forenger to a 100º angle (4A),

then push the PnP cap from the load

plate window to remove (4B).

6. Close the load plate (A), then push

the load lever (B) until it snaps into

the retention tab.

5. Position the CPU over the socket,

making sure that the gold triangle

is on the bottom-left corner of the

socket. Fit the socket alignment key

into the CPU notch.

Installing the CPU fan and heatsink assembly

The Intel®Pentium®4 LGA775 processor requires a specially designed

heatsink and fan assembly to ensure optimum thermal condition and

performance.

To install the CPU heatsink and fan:

1. Place the heatsink on top of the installed

CPU, making sure that the four fasteners

match the holes on the motherboard.

2. Push down two fasteners at a time

in a diagonal sequence to secure the

heatsink and fan assembly in place.

3. When the fan and heatsink assembly is in

place, connect the CPU fan cable to the

connector on the motherboard. 1

Load plate

PnP cap

Gold

triangle

mark

Alignment key

6 Installation Manual

Installing an expansion card

Installing a DIMM

1. Locate the DIMM sockets in the

motherboard.

2. Unlock a DIMM socket by

pressing the retaining clips

outward.

3. Align a DIMM on the socket such

that the notch on the DIMM

matches the break on the socket.

4. Push the DIMM to the socket until the retaining clips snap inward.

• Unplug the power supply before adding or removing DIMMs.

Failure to do so may cause damage to the motherboard and/or

components.

• A DDR2 DIMM is keyed with a notch so that it ts in only one

direction. Do not force a DIMM into a socket to avoid damaging the

DIMM.

1. Remove the metal bracket lock.

2. Remove the metal cover opposite

the slot that you intend to use.

3. Insert the card connector to the

slot, then press the card rmly

until it ts in place.

4. Replace the metal bracket lock. 3

7Installation Manual

Installing storage drives

Optical drive

1. Place the chassis upright, then

remove the upper 5.25” drive

bay metal plate cover.

2. Insert the optical drive to the

bay, then carefully push the

drive until its screw holes align

with the holes on the bay.

3. Secure the optical drive with two

screws on both sides of the bay.

4. Connect the IDE (A) and power

(B) plugs to connectors at the

back of the drive.

Floppy disk drive

1. Place the chassis upright, then

remove the lower 3.5” drive bay

metal plate cover.

2. Insert the oppy disk drive to

the bay, then carefully push the

drive until its screw holes align

with the holes on the bay.

3. Secure the oppy disk drive with

two screws on both sides of the

bay.

4. Connect the signal (A) and

power (B) plugs to connectors at

the back of the drive.

Hard disk drive

1. Place the chassis upright, then

remove the upper 3.5” drive bay

metal plate cover.

2. Insert the hard disk drive to the

bay, then carefully push the

drive until its screw holes align

with the holes on the bay.

3. Secure the hard disk drive with

two screws on both sides of the

bay.

8 Installation Manual

4. For SATA HDD: Connect the

SATA signal and power plugs to

the connectors at the back of

the drive.

For IDE HDD: Connect the IDE

signal and power plugs to the

connectors at the back of the drive.

Removing the bay covers and reinstalling the

front panel assembly and side cover

If you installed an optical and/or oppy disk drive, remove the bay cover(s)

on the front panel assembly before reinstalling it to the chassis. To do this:

1. Locate the bay cover locks.

2. Press the locks outward to

release the bay cover.

3. Push the bay cover inward, then

set it aside.

4. Follow the same instructions to

remove the 3.5” drive bay cover.

To reinstall the front panel assembly and side cover:

1. Insert the front panel assembly hinge-like tabs to the holes on the

right side of the chassis.

2. Swing the front panel assembly to the left, then insert the hooks to

the chassis until the front panel assembly ts in place.

3. Insert the side cover hooks to the chassis top and bottom holes.

4. Push the side cover to the direction of the front panel until it ts in place.

5. Secure the cover with two screws you removed earlier.

Air duct

Chassis tab holes

SATA IDE

Inhaltsverzeichnis

Andere Asus Desktop Handbücher

Asus

Asus ROG CG8890 Bedienungsanleitung

Asus

Asus M11AD Bedienungsanleitung

Asus

Asus PE100A Bedienungsanleitung

Asus

Asus T2-PH1 - Terminator - 0 MB RAM Bedienungsanleitung

Asus

Asus T3-P5G965 - T Series - 0 MB RAM Bedienungsanleitung

Asus

Asus EeeBox EB1007 Bedienungsanleitung

Asus

Asus BM1AD1 Bedienungsanleitung

Asus

Asus Essentio CP6130 Bedienungsanleitung

Asus

Asus BT1AD Bedienungsanleitung

Asus

Asus D500TE Bedienungsanleitung

Asus

Asus V6 Series Bedienungsanleitung

Asus

Asus Choromebox CN60 Bedienungsanleitung

Asus

Asus V2-M2NC61S Bedienungsanleitung

Asus

Asus ESC500 G3 Bedienungsanleitung

Asus

Asus TT-67 Bedienungsanleitung

Asus

Asus BM6AF Bedienungsanleitung

Asus

Asus Essentio CP6230 Bedienungsanleitung

Asus

Asus Vintage-PE2 Bedienungsanleitung

Asus

Asus PN53 Series Bedienungsanleitung

Asus

Asus BM6360 Bedienungsanleitung

Asus

Asus Pundit-S Bedienungsanleitung

Asus

Asus Essentio CG8565 Bedienungsanleitung

Asus

Asus G10AC Bedienungsanleitung

Asus

Asus B204 Bedienungsanleitung

Beliebte Desktop Handbücher anderer Marken

HP m9060n - Pavilion - Elite Technisches Datenblatt

Dell

Dell Inspiron 600m Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

HP Presario SV7000 - Desktop PC Bedienungsanleitung

HP ProDesk 400 G5 Handbuch

Logitech

Logitech MK320 Bedienungsanleitung

Dell

Dell XPS 730 H2C Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Dell

Dell Optiplex 9010 All In One Bedienungsanleitung

HP Z1 Bedienungsanleitung

Everex

Everex eXplora Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M75e Bedienungsanleitung

Dell

Dell Alienware Area-51 R4 Bedienungsanleitung