Asus Eee PC 900 Bedienungsanleitung

Andere Handbücher für Eee PC 900

2

Inhaltsverzeichnis

Beliebte Laptop Handbücher anderer Marken

HP

HP ze2401xt - Pavilion Notebook PC Bedienungsanleitung

Velocity

Velocity NoteMagix M10 Bedienungsanleitung

Dell

Dell Alienware 17 R2 Bedienungsanleitung

Toshiba

Toshiba A105-S2236 Bedienungsanleitung

HP

HP ENVY 17 Handbuch

Winbook

Winbook LM Bedienungsanleitung

Dell

Dell Inspiron 1464 Bedienungsanleitung

Dell

Dell Inspiron 15R 5537 Bedienungsanleitung

HP

HP PROBOOK 4520S Handbuch

Dell

Dell Latitude ATG D620 Bedienungsanleitung

Sony

Sony VAIO PCG-FX270 Bedienungsanleitung

Dell

Dell Latitude 7310 Bedienungsanleitung

Dell

Dell Precision GU806 Bedienungsanleitung

Sony

Sony VAIO PCG-R505JLK Bedienungsanleitung

Lenovo

Lenovo THINKPAD X32 Bedienungsanleitung

HP

HP Compaq tc4200 Kurzanleitung

Toshiba

Toshiba mini NB300 Bedienungsanleitung

Lenovo

Lenovo ThinkPad X201 Tablet Handbuch

TouchKit Setup

Reminder:

Be extremely careful when putting back on

the LCD hou ing; make ure the crew are

NOT tightened all the way down. Di continue action

immediately a oon a force i felt on the hou ing.

Further tightening of the crew will cau e touch

creen to crack re ulting in inaccurate cur or.

Package Content

Controller Board Preparation

Apply rubber adhe ive on the bottom ide of the controller board a

in ulation.

Eee PC 900 In tallation Guide

Step 1.

Remove all 6 screws for LCD housing.

Step 2.

Remove all 6 screws for bottom

housing.

Step 3.

Remove ke board b pushing in the 3

springs.

Step 4.

Remove both FPC for ke board and

touchpad in the direction indicated.

Step 5.

Remove all 9 screws for ke board

housing.

Step 6.

1. Use thin double-sided tape to secure the

touch screen panel on the metal frame

of the LCD module.

2. Remove both screws to detach LCD

module from the housing.

Step 7.

Detach the old connector to the

camera module and replace it Camera

Harness provided b the TouchKit.

Step 8.

Remove both screws on each side of

the LCD module to detach the LCD

brackets. This is to lower the LCD

module to accommodate the thickness

of the touch screen panel.

Remember to replace the LCD brackets

back to its’ original position in step 6.

Step 9. Touch Screen Alignment

Horizontal alignment (direction 1) use

the screw hole as reference point.

Vertical alignment (direction 2)

approximatel 1.5mm~2.0mm from the

bottom edge of the metal frame.

Step 10.

Place Shock Absorber Rubber on the

metal frame surrounding the touch

screen panel.

Step 11.

Remove camera connector.

Step 12.

1. Connector placement for touch screen

panel.

2. Camera port on the motherboard to USB

input on the controller (Hub Harness)

3. USB output to camera module (Camera

Harness)

4. USB output (optional expansion)

5. USB output (optional expansion)

Be extremely careful when putting back on the LCD hou ing; make ure the crew are NOT tightened all

the way down. Di continue action immediately a oon a force i felt on the hou ing. Further tightening

of the crew will cau e touch creen to crack re ulting in inaccurate cur or.