Asus Eee PC MK90H Bedienungsanleitung
E4889
15G06Q162100
Quick Start Guide
netpal
Disney Netpal Quick Start Guide
1
DO NOT expose
to dirty or dusty
environments.
DO NOT expose
to strong
magnetic or
electrical fields.
DO NOT expose
to or use near
liquids, rain, or
moisture.
DO NOT press or touch
the display panel.
DO NOT place on
uneven or unstable
work surfaces.
DO NOT place or
drop objects on
top.
Safety Precautions
The following safety precautions will increase the life of the Disney Netpal.
Follow all precautions and instructions. Except as described in this manual,
refer all servicing to qualified personnel.
Disconnect the AC power before cleaning.Wipe the Disney Netpal
using a clean cellulose sponge or chamois cloth dampened with a
solution of nonabrasive detergent and a few drops of warm water
and remove any extra moisture with a dry cloth.
DO NOT leave the
Disney Netpal on your
lap or any part of the
body.
Ambient
temperatures
between 5°C (41
°F) and 35°C (95°
F)
CAUTION! ELECTRICALLY OPERATED PRODUCT.THIS IS NOT A TOY.
TO AVOID RISK OF ELECTRIC SHOCK OR FIRE, IT SHOULD NOT BE
PLAYED WITHOUT ADULT SUPERVISION OR PLACED WHERE SMALL
CHILDREN CAN REACH.
Disney Netpal Quick Start Guide
2
Powering on your Disney Netpal
These are only quick instructions for using your Disney Netpal.
1. Connect the AC power adapter
• When you open the display panel, do not force it down to the table
or else the hinges may break! Never lift the Disney Netpal by the
display panel!
• Only use battery packs and power adapters supplied with this
Disney Netpal or specifically approved by the manufacturer or
retailer for use with this model or else damage may occur to the
Disney Netpal.The output voltage of this adapter is +12Vdc, 3A.
Remember to fully charge the battery before first use and whenever
it is depleted to prolong battery life.
2. Turn ON the Disney Netpal
Damage may occur if you use
a different adapter to power
the Disney Netpal.You may
damage both your battery
pack(s) and the Disney Netpal
with a faulty AC-DC adapter.
Disney Netpal Quick Start Guide
3
First-time Startup
For the first time you start your Disney Netpal, the Windows wizard will
launch automatically and lead you through setting up your preferences
and some basic information.
Follow the wizard instructions to finish the initialization:
2. Select your system settings by
specifying the region you are
in, the language you use and
the keyboard type you use.
Click Next to continue.
1. The Welcome message
appears. Click Next to
continue.
3. Select the time zone you are
in and click Next to continue.
4. Follow the onscreen instructions to finish the initialization and to
register with Microsoft.
Disney Netpal Quick Start Guide
4
Parental Control
Disney Desktop helps you keep your child safe from inappropriate web
content and applications. It allows you to configure how you want your
child to use this Disney Netpal, including programs which they can and
cannot use and a safe environment for your children when they go online.
Setting the master password and
creating an account
1. Double-click the Parental Control icon on the
desktop to start the program.
After the Windows initialization, you will
be asked to configure Parental Control.
You can configure the settings whenever
you want by clicking the shortcut on the
desktop.
2. Click Windows Control Panel
on the left pane to set the
administrator password.
For service and support, visit our multi-language web site at
http://support.asus.com.
3. Refer to the User Manual for the following instructions to finish the
Disney Parental Control configuration.
Disney Netpal Quick Start Guide
5
Wireless network connection
1. Double-click the crossed wireless network icon in the
Notification area.
3. When connecting, you may have to
enter a password.
2. Select the wireless access point
you want to connect to from the
list and click Connect to build the
connection.
If you cannot find the desired access
point, click Refresh network list in
the left pane and search in the list
again.
If the wireless connection icon does not show in the Notification
area. Activate the wireless LAN function by pressing
+
(<Fn> + <F2>) before configuring a wireless network connection.
4. After a connection has been
established, the connection is shown
on the list.
5. You can see the wireless network
icon in the Notification area.
The wireless connection icon disappears when you Press
+
(<Fn> + <F2>) to disable the WLAN function.
Disney Netpal Quick Start Guide
6
Wired network connection
To establish a wired network, follow the instructions below:
Using a dynamic IP:
1. Right-click the network icon with a
yellow warning triangle on the
Windows® taskbar and select Open
Network Connections.
3. Click Internet Protocol
(TCP/IP) and click Properties.
2. Right-click Local Area Connection
and select Properties.
4. Click Obtain an IP address
automatically and click OK.
Disney Netpal Quick Start Guide
7
Using a static IP:
1. Repeat the step 1–3 of Using a dynamic IP to start the static IP
network configuration.
2 Click Use the following IP address.
3. Enter the IP address, Subnet mask and Gateway from your service
provider.
4. If needed, enter the preferred DNS Server address and alternative
address.
5. After entering all the related values, click OK to build the network
connection.
Contact your Internet Service Provider (ISP) if you have problems
connecting to the network.
Disney Netpal Quick Start Guide
8
Connecting removable devices
You can connect removable devices based on your needs.
1 2
Memory Card Slot
1
2
USB Flash Memory Disk
USB External Hard Disk DriveUSB External Optical Disk Drive
SD (Secure Digital)
MiniSD (with SD adapter)
MMC (Multimedia Card)
MMC Plus
RS-MMC (Reduced Size) (with MMC adapter)
USB Port (2.0/1.1)
microSD
SD Adapter
Disney Netpal Quick Start Guide
9
WLAN Setup FAQ
If you follow the instructions in the manual and fail to build a wireless
network connection successfully, refer to the frequently asked questions
below for quick solutions to your problems. For more information and
advanced wireless network configuration, please visit http://livesupport.
asus.com/eeewirelessxphowto.html.
Ensure that the wireless LAN function is enabled before configuring
a wireless network connection. If not, press <Fn> + <F2> to activate
the wireless LAN function.
1. I am asked to enter the key for the wireless connection.
The network you would like to connect is encrypted, you need to
enter the correct key before using this network. Unless you have
your own wireless router, you will always need a correct key for the
encrypted wireless network.
2. Is my USB 3G wireless data card/wireless router compatible with
Disney Netpal Windows XP OS?
Contact the wireless card/router manufacturer if you have a
compatible issue.
3. I cannot build a wireless connection to my wireless router.
Try the following solutions.
• Restart your router and ensure that the router setup is correct.
• Cancel the encryption key (if there’s one) and try again.
• The distance from router influences the wireless signal strength.
Weak signal strength may fail the connection.
Andere Handbücher für Eee PC MK90H
1
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Asus Laptop Handbücher
Asus
Asus W3A Gebrauchsanweisung
Asus
Asus Zenbook Pro Duo UX581 Handbuch
Asus
Asus E3179 Bedienungsanleitung
Asus
Asus F9F Bedienungsanleitung
Asus
Asus Eee PC 900SD Bedienungsanleitung
Asus
Asus ExpertBook B9 Leitfaden
Asus
Asus ROG G703GXR EV002T Leitfaden
Asus
Asus E3480 Gebrauchsanweisung
Asus
Asus E9469 Leitfaden
Asus
Asus Z62F Bedienungsanleitung
Asus
Asus Eee PC R252B Bedienungsanleitung
Asus
Asus TP300LA Leitfaden
Asus
Asus A95VB Bedienungsanleitung
Asus
Asus Eee PC 1005HAB Bedienungsanleitung
Asus
Asus Eee PC 701SDX Linux Bedienungsanleitung
Asus
Asus P1440FAFA1614R Bedienungsanleitung
Asus
Asus Zephyrus GX531GW-ES008R Bedienungsanleitung
Asus
Asus EEEPC900-W072X - Eee PC 900 Bedienungsanleitung
Asus
Asus ZENBOOK UX32VD Bedienungsanleitung
Asus
Asus UX303UA Leitfaden
