Asus NCCH-DLE Bedienungsanleitung

Motherboard

NCCH-DLE

iiii

E1975E1975

E1975

First Edition V1First Edition V1

First Edition V1

May 2005May 2005

May 2005

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form

or by any means, except documentation kept by the purchaser for backup purposes, without the

express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or

altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2)

the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES

OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

IN NO EVENT SHALLASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE

LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES

(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE

OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR

ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUALARE FURNISHED

FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGEATANY TIME

WITHOUT NOTICE,AND SHOULD NOT BE CONSTRUEDAS A COMMITMENT BY ASUS.

ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR

INACCURACIES THAT MAYAPPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS

AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identification or

explanation and to the owners’ benefit, without intent to infringe.

iiiiii

iii

Contents

Notices ............................................................................................... vii

Safety information ............................................................................ viii

About this guide ................................................................................. ix

Typography .......................................................................................... x

NCCH-DLE specifications summary ..................................................... xi

Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introduction

1.1 Welcome! .............................................................................. 1-1

1.2 Package contents ................................................................. 1-1

1.3 Special features .................................................................... 1-2

1.3.1 Product highlights................................................... 1-2

1.3.2 Innovative ASUS features ....................................... 1-4

Chapter 2: Hardware informationChapter 2: Hardware information

Chapter 2: Hardware information

2.1 Before you proceed .............................................................. 2-1

2.2 Motherboard installation ....................................................... 2-3

2.2.1 Placement direction ................................................ 2-3

2.2.2 Screw holes ............................................................ 2-3

2.2.3 Support plates for motherboard............................. 2-4

2.2.4 Motherboard layout ................................................ 2-8

2.2.5 Layout contents ..................................................... 2-9

2.3 Central Processing Unit (CPU) ............................................ 2-11

2.3.1 Overview ............................................................... 2-11

2.3.2 Installing the CPU.................................................. 2-11

2.3.3 Installing the CPU heatsink and fan ...................... 2-13

2.4 System memory ................................................................. 2-15

2.4.1 Overview ............................................................... 2-15

2.4.2 Memory configurations ......................................... 2-15

2.4.3 Installing a DIMM ................................................... 2-17

2.4.4 Removing a DIMM ................................................. 2-17

2.5 Expansion slots ................................................................... 2-18

2.5.1 Installing an expansion card .................................. 2-18

2.5.2 Configuring an expansion card.............................. 2-18

2.5.3 PCI/PCI-X slots ...................................................... 2-20

2.5.4 AGP Pro slot ......................................................... 2-20

2.6 Jumpers .............................................................................. 2-21

2.7 Connectors ......................................................................... 2-25

2.7.1 Rear panel connectors .......................................... 2-25

2.7.2 Internal connectors............................................... 2-26

iviv

Contents

Chapter 3: Powering upChapter 3: Powering up

Chapter 3: Powering up

3.1 Starting up for the first time................................................ 3-1

3.2 Vocal POST Messages .......................................................... 3-2

3.3 Powering off the computer .................................................. 3-4

3.3.1 Using the OS shut down function ........................... 3-4

3.3.2 Using the dual function power switch .................... 3-4

Chapter 4: BIOS setupChapter 4: BIOS setup

Chapter 4: BIOS setup

4.1 Managing and updating your BIOS ........................................ 4-1

4.1.1 Creating a bootable floppy disk .............................. 4-1

4.1.2 AwardBIOS Flash Utility .......................................... 4-3

4.1.3 ASUS CrashFree BIOS 2 utility ................................ 4-6

4.1.4 ASUS EZ Flash utility .............................................. 4-9

4.1.5 ASUS Update utility .............................................. 4-10

4.2 BIOS setup program ........................................................... 4-13

4.2.1 BIOS menu screen ................................................. 4-14

4.2.2 Menu bar ............................................................... 4-14

4.2.3 Navigation keys .................................................... 4-14

4.2.4 General help .......................................................... 4-15

4.2.5 Sub-menu ............................................................. 4-15

4.2.6 Scroll bar .............................................................. 4-15

4.2.7 Pop-up window ..................................................... 4-15

4.3 Main menu .......................................................................... 4-16

4.3.1 Primary IDE Master ............................................... 4-17

4.3.2 Primary IDE Slave .................................................. 4-19

4.3.3 Secondary IDE Master ........................................... 4-19

4.3.4 Secondary IDE Slave ............................................. 4-19

4.4 Advanced menu .................................................................. 4-20

4.4.1 Advanced BIOS Features ...................................... 4-20

4.4.2 CPU Configuration ................................................. 4-21

4.4.3 Memory Configuration .......................................... 4-23

4.4.4 Chipset ................................................................. 4-24

4.4.5 Onboard Device .................................................... 4-27

4.4.6 PCIPnP ................................................................... 4-32

4.4.7 USB Configuration ................................................. 4-34

4.5 Power menu ........................................................................ 4-35

4.5.1 APM Configuration ................................................ 4-36

4.5.2 Hardware Monitor ................................................. 4-39

Contents

4.6 Boot menu .......................................................................... 4-41

4.6.1 Boot Device Priority .............................................. 4-41

4.6.2 Hard Disk Boot Priority ......................................... 4-42

4.6.3 Removable Device Priority .................................... 4-42

4.6.4 Boot Settings Configuration ................................. 4-43

4.6.5 Security ................................................................ 4-45

4.7 Exit menu ........................................................................... 4-47

Chapter 5: Driver installationChapter 5: Driver installation

Chapter 5: Driver installation

5.1 RAID ...................................................................................... 5-1

5.1.1 RAID configurations ................................................ 5-1

5.1.2 Installing hard disk drives ....................................... 5-2

5.1.3 Setting the RAID item in BIOS ................................ 5-2

5.1.4 Adaptec

RAID configuration utility ....................... 5-3

5.1.4.1 Creating a RAID 0 set (Striped) ............. 5-4

5.1.4.2 Creating a RAID 1 set (Mirrored) .......... 5-10

5.1.5 Creating an Intel

6300ESB RAID driver disk ....... 5-21

5.1.5.1 Windows

2000/2003 Server .............. 5-21

5.1.5.2 Red Hat

Linux 9.0 ............................... 5-21

5.1.6 Installing the Intel

6300ESB RAID controller

driver .................................................................... 5-22

5.1.6.1 Windows

2000/2003 Server .............. 5-22

5.1.6.2 Red Hat

Linux 9.0 ............................... 5-26

5.1.7 FastBuild™ Utility .................................................. 5-29

5.1.7.1 Creating a RAID 0 set (Performance) ... 5-30

5.1.7.2 Creating a RAID 1 set (Security) .......... 5-32

5.1.7.3 Creating a RAID 0+1 set

(Security and Performance) ................. 5-38

5.1.7.4 Manually creating a RAID set ................ 5-40

5.1.7.5 Deleting a RAID set .............................. 5-43

5.1.7.6 Rebuilding a RAID 1 set ........................ 5-45

5.1.8 Installing the Promise

PDC20319 RAID

controller driver .................................................... 5-47

5.1.8.1 Windows

2000 Server ........................ 5-47

5.1.8.2 Windows

2003 Server ........................ 5-51

5.1.8.3 Red Hat

Linux 9.0 ............................... 5-56

5.2 LAN .................................................................................... 5-57

5.2.1 Windows

2000 Server ........................................ 5-57

5.2.2 Windows

2003 Server ........................................ 5-59

5.2.3 Red Hat

Linux 9.0 ............................................... 5-61

vivi

5.3 VGA .................................................................................... 5-62

5.3.1 Windows

2000 Server ........................................ 5-62

5.3.2 Windows

2003 Server ........................................ 5-63

Verifying the VGA driver installation .................... 5-63

5.3.3 Red Hat

Linux 9.0 ............................................... 5-63

Appendix: Reference informationAppendix: Reference information

Appendix: Reference information

A.1 NCCH-DLE block diagram ...................................................... A-1

Contents

viivii

vii

Notices

Federal Communications Commission StatementFederal Communications Commission Statement

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

•

This device may not cause harmful interference, and

•

This device must accept any interference received including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with

manufacturer’s instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications StatementCanadian Department of Communications Statement

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus set out in the Radio Interference

Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with CanadianThis class B digital apparatus complies with Canadian

This class B digital apparatus complies with Canadian

ICES-003.ICES-003.

ICES-003.

The use of shielded cables for connection of the monitor to the graphics

card is required to assure compliance with FCC regulations. Changes or

modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate

this equipment.

viiiviii

viii

Safety information

Electrical safetyElectrical safety

Electrical safety

•

To prevent electrical shock hazard, disconnect the power cable from

the electrical outlet before relocating the system.

•

When adding or removing devices to or from the system, ensure that

the power cables for the devices are unplugged before the signal cables

are connected. If possible, disconnect all power cables from the existing

system before you add a device.

•

Before connecting or removing signal cables from the motherboard,

ensure that all power cables are unplugged.

•

Seek professional assistance before using an adapter or extension cord.

These devices could interrupt the grounding circuit.

•

Make sure that your power supply is set to the correct voltage in your

area. If you are not sure about the voltage of the electrical outlet you

are using, contact your local power company.

•

If the power supply is broken, do not try to fix it by yourself. Contact a

qualified service technician or your retailer.

Operation safetyOperation safety

Operation safety

•

Before installing the motherboard and adding devices on it, carefully read

all the manuals that came with the package.

•

Before using the product, make sure all cables are correctly connected

and the power cables are not damaged. If you detect any damage,

contact your dealer immediately.

•

To avoid short circuits, keep paper clips, screws, and staples away from

connectors, slots, sockets and circuitry.

•

Avoid dust, humidity, and temperature extremes. Do not place the

product in any area where it may become wet.

•

Place the product on a stable surface.

•

If you encounter technical problems with the product, contact a qualified

service technician or your retailer.

ixix

About this guide

This user guide contains the information you need when installing and

configuring the motherboard.

How this guide is organizedHow this guide is organized

How this guide is organized

This manual contains the following parts:

••

•Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introduction

This chapter describes the features of the motherboard and the new

technologies it supports.

••

•Chapter 2: Hardware informationChapter 2: Hardware information

Chapter 2: Hardware informationChapter 2: Hardware information

Chapter 2: Hardware information

This chapter lists the hardware setup procedures that you have to

perform when installing system components. It includes description of

the switches, jumpers, and connectors on the motherboard.

••

•Chapter 3: Powering upChapter 3: Powering up

Chapter 3: Powering upChapter 3: Powering up

Chapter 3: Powering up

This chapter describes the power up sequence and ways of shutting

down the system.

••

•Chapter 4: BIOS setupChapter 4: BIOS setup

Chapter 4: BIOS setupChapter 4: BIOS setup

Chapter 4: BIOS setup

This chapter tells how to change system settings through the BIOS

Setup menus. Detailed descriptions of the BIOS parameters are also

provided.

••

•Chapter 5: Driver installationChapter 5: Driver installation

Chapter 5: Driver installationChapter 5: Driver installation

Chapter 5: Driver installation

This chapter provides instructions for creating and configuring RAID,

and installing the necessary drivers for different system components.

••

•Appendix: Reference informationAppendix: Reference information

Appendix: Reference informationAppendix: Reference information

Appendix: Reference information

This appendix includes additional information that you may refer to

when configuring the motherboard.

Where to find more informationWhere to find more information

Where to find more information

Refer to the following sources for additional information and for product

and software updates.

1.1.

1. ASUS websitesASUS websites

ASUS websitesASUS websites

ASUS websites

The ASUS website provides updated information on ASUS hardware

and software products. Refer to the ASUS contact information.

2.2.

2. Optional documentationOptional documentation

Optional documentationOptional documentation

Optional documentation

Your product package may include optional documentation, such as

warranty flyers, that may have been added by your dealer. These

documents are not part of the standard package.

Conventions used in this guideConventions used in this guide

Conventions used in this guide

To make sure that you perform certain tasks properly, take note of the

following symbols used throughout this manual.

DANGER/WARNING:DANGER/WARNING:

DANGER/WARNING: Information to prevent injury to yourself

when trying to complete a task.

CAUTION:CAUTION:

CAUTION: Information to prevent damage to the components

when trying to complete a task.

NOTE:NOTE:

NOTE: Tips and additional information to help you complete a

task.

IMPORTANT:IMPORTANT:

IMPORTANT: Instructions that you MUST follow to complete a

task.

TypographyTypography

Typography

Bold textBold text

Bold text Indicates a menu or an item to select.

Italics

Used to emphasize a word or a phrase.

<Key> Keys enclosed in the less-than and greater-

than sign means that you must press the

enclosed key.

Example: <Enter> means that you must press

the Enter or Return key.

<Key1+Key2+Key3> If you must press two or more keys

simultaneously, the key names are linked with

a plus sign (+).

Example: <Ctrl+Alt+D>

Command Means that you must type the command

exactly as shown, then supply the required

item or value enclosed in brackets.

Example: At the DOS prompt, type the

command line:

format A:/S

Inhaltsverzeichnis

Andere Asus Hauptplatine Handbücher

Asus

Asus CUV4X-C PC133 Bedienungsanleitung

Asus

Asus GRYPHON ARMOR KIT Bedienungsanleitung

Asus

Asus P4BGL-VM Bedienungsanleitung

Asus

Asus PRIME B360M-A Bedienungsanleitung

Asus

Asus V4-M3A3200 Bedienungsanleitung

Asus

Asus P6T6WS Revolution - Motherboard - ATX Bedienungsanleitung

Asus

Asus P5GDC Deluxe Bedienungsanleitung

Asus

Asus M5A88-M Bedienungsanleitung

Asus

Asus M2N-X PLUS Bedienungsanleitung

Asus

Asus A7V8X-X Bedienungsanleitung

Asus

Asus P5WD2-E Premium Kurzanleitung

Asus

Asus PRIME H310M-F R2.0 Bedienungsanleitung

Asus

Asus ROG STRIX B660-F Gaming WiFi Bedienungsanleitung

Asus

Asus Motherboard A7V8X Bedienungsanleitung

Asus

Asus P/E-P55T2P4D Bedienungsanleitung

Asus

Asus M4A88T-I DELUXE Bedienungsanleitung

Asus

Asus STRIX Z270G GAMING Bedienungsanleitung

Asus

Asus PCI I-486SP3G Bedienungsanleitung

Asus

Asus M4A89GTD PRO Bedienungsanleitung

Asus

Asus AT3GC-I - Motherboard - Mini ITX Bedienungsanleitung

Asus

Asus A58M-K Bedienungsanleitung

Asus

Asus B85M-E Leitfaden

Asus

Asus P8H61-M EVO Gebrauchsanweisung

Asus

Asus KGPE-D16 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung

Epson

Epson S5U13700P00C000 Bedienungsanleitung

Gigabyte

Gigabyte GA-K8N Ultra-SLI Bedienungsanleitung

Albatron

Albatron PX925XE Series Bedienungsanleitung