Asus RS100-E7 Bedienungsanleitung
RS100-E7/PI2
Conguration Guide
12
II
Copyright © 2011 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language in any form or by any means,
except documentation kept by the purchaser for backup purposes, without the express written permission
of ASUSTeK COMPUTER INC. (“ASUS”).
ASUS provides this manual “as is” without warranty of any kind, either express or implied, including but not
limited to the implied warranties or conditions of merchantability or tness for a particular purpose. In no
event shall ASUS, its directors, ofcers, employees, or agents be liable for any indirect, special, incidental,
or consequential damages (including damages for loss of prots, loss of business, loss of use or data,
interruption of business and the like), even if ASUS has been advised of the possibility of such damages
arising from any defect or error in this manual or product.
Specications and information contained in this manual ae furnished for informational use only, and are
subject to change at any time without notice, and should not be construed as a commitment by ASUS.
ASUS assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual,
including the products and software described in it.
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
E6721
First Edition V1
July 2011
III
Contents
Revision history
Revision Revision history Date
V1 First release of RS100-E7/PI2 conguration guide July 2011
Revision history.......................................................................................... III
Safety information ...................................................................................... IV
Chapter 1: Product introduction
1.1 Key features.................................................................................. 1-2
1.2 System overview.......................................................................... 1-3
1.3 Front panel features..................................................................... 1-4
1.4 Rear panel features...................................................................... 1-4
1.5 Systemspecications ................................................................. 1-5
Chapter 2: Components
2.1 Upgrading CPU and CPU heatsink............................................. 2-2
2.2 Upgrading system memory......................................................... 2-3
2.3 Upgrading hard disk drives......................................................... 2-4
2.4 Installing ASUS Server Management Board.............................. 2-6
2.5 Rackmount rail kit........................................................................ 2-8
2.6 OS support list ............................................................................. 2-9
IV
Safety information
Electrical Safety
• Before installing or removing signal cables, ensure that the power cables for
the system unit and all attached devices are unplugged.
• To prevent electrical shock hazard, disconnect the power cable from the
electrical outlet before relocating the system.
• When adding or removing any additional devices to or from the system, contact
a qualied service technician or your dealer. Ensure that the power cables for
the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you service.
• If the power supply is broken, do not try to x it by yourself. Contact a qualied
service technician or your dealer.
Operation Safety
• Servicing of this product or units is to be performed by trained service
personnel only.
• Before operating the server, carefully read all the manuals included with the
server package.
• Before using the server, ensure all cables are correctly connected and the
power cables are not damaged. If any damage is detected, contact your dealer
as soon as possible.
• To avoid short circuits, keep paper clips, screws, and staples away from
connectors, slots, sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Place the server on a stable
surface.
This product is equipped with a three-wire power cable and plug for the user’s
safety. Use the power cable with a properly grounded electrical outlet to avoid
electrical shock.
Lithium-Ion Battery Warning
CAUTION! Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer’s
instructions.
CD-ROM Drive Safety Warning
CLASS 1 LASER PRODUCT
Heavy System
CAUTION! This server system is heavy. Ask for assistance when moving or
carrying the system.
1-
This chapter describes the key
features of RS100-E7/PI2. It includes
the product overview and general
specications.
Chapter 1
Product introduction
Chapter 1: Product introduction1-2
1.1 Key features
Ultra-Quiet Rack Server
• Provides excellent acoustic control (under 29dBA), which is even lower than a
projector.
• Facilitate customers with quiet working environment.
Excellent Thermal Design
• Heat-pipe for cooing efciency.
• Lower acoustic level and power saving.
Maximin Storage
• Highly compacted size of 15” depth for space saving.
• Two 3.5 HDD Supported with RAID.
Flexible Rack Selections
• Short Chassis Can Widen Your Selections on Rack and Cabinet.
• More Capacity in Data Center with Short Rack.
• Not only save your cabinet space, but increase density on cabinet
Remote Management Solution
• Easy maintenance, friendly GUI, 7x24 real time management.
Energy saving
• 80Plus PSU for optimal power efciency.
• High power efciency fan.
• Intelligent fan control technology.
• ASUS proprietary CPU heat-pipe.
ASUS RS100-E7/PI2 1-3
1.2 System overview
Items Items
1. Central processing unit (CPU) 6. Optical disk drive
2. CPU heatsink 7. Riser card
3. System memory 8. ASUS Server management board (optional)
4. Hard disk drivesHard disk drives 9. Rackmount rail kit (optional)
5. HDD bracketHDD bracket
4
5
6
8
1
2
7
3
9
9
Chapter 1: Product introduction1-4
1.3 Front panel features
1.4 Rear panel features
• The ports for the PS/2 keyboard, PS/2 mouse, USB, VGA, and Gigabit LAN
do not appear on the rear panel if motherboard is not present.
• *The port is for ASUS ASMB4-iKVM controller card only.
Turn off the system power and detach the power supply before removing or
replacing any system component.
AC power socket
USB 2.0 ports
PS/2 mouse port
PS/2 keyboard port
Serial port
VGA port
LAN port 1
LAN port 2
Expansion slot
LAN port 3*
12
Optical drive
USB 2.0 ports HDD Access LED
LAN2 LED
LAN1 LED
Power LED Reset button
Power button
Message LED
ASUS RS100-E7/PI2 1-5
1.5 Systemspecications
Model Name RS100-E7/PI2
Processor / System Bus
1 x Socket LGA1155
Intel® Xeon® E3-1200 Processor Family
Intel® CoreTM i3-2100 Processor Family
Core Logic Intel® C204 Chipset
ASUS Features Smart Fan √
ASWM2.0 √
Memory
Total Slots 4 (2 Channels)
Capacity Maximum up to 32GB
Do not support R-DIMM and non ECC U-DIMM
Memory Type DDR3 1333 / 1066 Unbuffered DIMM with ECC
Memory Size 1 GB, 2GB, 4GB, 8GB
Expansion
Slots
Total PCI/PCI-X/
PCI-E Slots 1
Slot Type 1 x PCI-E 2.0 x16 slot (x16 link) (Full-Height/HL)
Storage
2 x SATA3 6Gb/s
Intel® C204 (for Windows only)
- Supports software RAID 0 & 1
HDD Bays
I = internal
A or S = hot-
swappable
2 x Internal 3.5” SATA2 HDD Bays
Networking LAN 2 x Intel®82574L + 1 x Mgmt LAN
Graphic VGA Aspeed® AST2050 16MB
Auxiliary Storage FDD / CD / DVD 1 x Slim-type Optical Device Bay
(Options: No ODD / DVD-ROM / DVD-RW)
Onboard I/O
1 x External Serial Port
3 x RJ-45 ports (1 for ASMB5-iKVM)
4 x USB 2.0 ports (Front x 2, Rear x 2)
1 x VGA port
1 x PS/2 keyboard port
1 x PS/2 mouse port
(continued on the next page)
Chapter 1: Product introduction1-6
*Specicationsaresubjecttochangewithoutnotice.
OS Support
Windows® Server 2008 R2
Windows® Server 2008 Enterprise 32/64-bit
Windows® Server 2003 R2 Enterprise 32/64-bit
RedHat® Enterprise Linux AS5.5/6.0 32/64-bit
SuSE® Linux Enterprise Server 10 SP3/11 32/64-bit
(Subject to change without any notice)
Anti-virus Software Optional anti-virus CD Pack
Management
Solution
Out of Band
Remote
Hardware
Optional ASMB5-iKVM for KVM-over-IP support
Software ASUS ASWM Enterprise®
Net Weight Kg (CPU, DRAM &
HDD not inclu ded) 6.5 Kg
Dimension (DD x WW x HH) 380mm x 429.6mm x 43.2mm
Power Supply 220W Single Power Supply
Power Rating Input: 100-240Vac, 4-2A, 50-60Hz, Class I
Environment
Operation temperature: 10°C–35°C / Non operation
temperature: -40°C–70°C
Non operation humidity: 20%–90%
( Non-condensing)
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Asus Server Handbücher
Asus
Asus TS300-E5 Bedienungsanleitung
Asus
Asus RS300-E7 RS4 Bedienungsanleitung
Asus
Asus AP2000 Bedienungs- und Wartungshandbuch
Asus
Asus RS161-E4 PA2 Bedienungsanleitung
Asus
Asus RS720Q-E9-RS24-S Bedienungsanleitung
Asus
Asus RS162-E4 RX4 Bedienungsanleitung
Asus
Asus RS720-X7 Bedienungsanleitung
Asus
Asus RS300-H8-PS12 Bedienungsanleitung
Asus
Asus AP8000 Bedienungs- und Wartungshandbuch
Asus
Asus RS162-E4 RX4 Bedienungsanleitung
Asus
Asus RS500A-E6/PS4 Bedienungsanleitung
Asus
Asus AW1500-S5 Bedienungsanleitung
Asus
Asus RS160-E4 PA4 Bedienungsanleitung
Asus
Asus RS720A-E9-RS24-E Bedienungsanleitung
Asus
Asus Mimic Internet Camera CX200 Bedienungsanleitung
Asus
Asus K31AN Bedienungsanleitung
Asus
Asus ESC4000 IB Bedienungsanleitung
Asus
Asus RS720Q-E7 RS12 Bedienungsanleitung
Asus
Asus RS720-E7-RS24-EG Bedienungsanleitung
Asus
Asus TS700-E8-PS4 V2 Bedienungsanleitung
