Asus (WL-330) Bedienungsanleitung

English

Quick Start Guide

Pocket Wireless Access Point

(WL-330)

E1486

2ASUS Pocket Wireless Access Point (WL-330)

English

Quick Start Guide

Package contents

Check the following items in your ASUS Pocket Wireless AP package. Contact

your retailer if any item is damaged or missing.

ASUS Pocket Wireless AP (WL-330)

Compact universal power adapter and plug (100V ~ 240V)

USB adapter and plug

RJ-45 connector and cable

Support CD

Quick Start Guide

Soft case

IMPORTANT! Use only the power adapter and plug that came with the

ASUS Pocket Wireless AP package. Using other power adapter and plug

may damage the device.

System requirements

Before installing the ASUS Pocket Wireless AP, make sure that your system

meets the following requirements:

•An Ethernet (10Base-T or 100Base-TX) adapter for wired client

•At least one 802.11b (11Mbps) or 802.11g (54Mbps) wireless adapter for

wireless mobile client

•An installed TCP/IP and Internet browser

NOTE. Refer to the User Guide in the support CD for detailed

information on the ASUS Pocket Wireless AP.

3ASUS Pocket Wireless Access Point (WL-330)

English

Quick Start Guide

Ethernet adapter mode (USB bus power)

1. Connect one end of the RJ-45

cable to the Ethernet port of the

device.

2. Connect the other end of the

RJ-45 cable to the Ethernet port

of your computer.

3. Insert the USB cable plug to the

DC-IN socket of the device.

4. Insert the other end of the USB

cable to any available USB port of

your computer.

After installation, check the Power and Ethernet LEDs. These LEDs light up to

indicate that the device is on and has physical connection to an Ethernet network.

NOTE. For notebooks with limited power supply, we recommend that you

use the supplied universal power adapter and plug instead of the USB

adapter and plug.

Installing the device

Follow these instructions to install the ASUS Pocket Wireless AP.

Access point mode (DC power)

1. Connect one end of the RJ-45 cable

to the Ethernet port of the device.

2. Connect the other end of the

RJ-45 cable to the 10Base-T port

of a network hub, switch, router, or

wall patch panel.

3. Insert the universal power adapter

plug to the DC-IN socket of the device.

4. Connect the universal power adapter to a

wall socket.

5. Insert the power plug to the DC-IN socket of the network hub, switch, or router.

6. Plug the power adapter of the network hub, switch, or router to a wall socket.

4ASUS Pocket Wireless Access Point (WL-330)

English

Quick Start Guide

LED indicators

The ASUS Pocket Wireless AP comes with a Power,

Wireless, and Ethernet LED indicators. Refer to the

table below for LED indications.

LED Status Mode* Indication

Power On AP/EA The device in on and ready.

Off AP/EA The device is off or performing boot sequence

Blinking AP/EA Firmware upgrade failed.

Wireless On AP The device is on and ready.

EA The device is associated with an AP or other

wireless device.

Off AP The device is off.

EA The device is not associated with an AP or other

wireless device.

Blinking AP/EA The device is transmitting or receiving data.

Ethernet On AP/EA The device is off or not connected to an Ethernet

network.

Off AP/EA The device is connected to an Ethernet network.

*Modes:

AP - Access point

EA - Ethernet adapter

5ASUS Pocket Wireless Access Point (WL-330)

English

Quick Start Guide

Installing the utilities

The support CD contains the utilities for configuring theASUS Pocket WirelessAP.

To install the device utilities in your computer:

1. Insert the support CD to the optical drive.

2. Click “Install ASUS WLAN AP Utilities”when the ASUS Wireless LAN

Access Point WL-330 installation window appears.

3. The device utilities are copied into your computer.

If Autorun is NOT enabled in your computer, browse the contents of the

support CD and double click the Setup.exe file to run the CD.

Other support CD options

Uninstall ASUS WLAN Card Utilities/Driver. Click this option to uninstall the

ASUS Pocket Wireless AP utilities from your system.

Run Setup Wizard Utility. Click this option to run the Setup Wizard utility.

Read/Install User Documentation. Click to view the installation and quick

setup guides in PDF format.

Explore this CD. Click this option to explore the support CD contents.

Browse our Web Site. Click this option to visit the ASUS website.

Click EXIT to close the installation window.

6ASUS Pocket Wireless Access Point (WL-330)

English

Quick Start Guide

Using the Setup Wizard utility

The Setup Wizard utility allows easy configuration of the ASUS Pocket Wireless

AP settings in both access point and Ethernet adapter modes. You may launch

the Setup Wizard utility directly from the support CD or from the Windows

desktop.

Launching the Setup Wizard utility

To launch the Setup Wizard utility

from the support CD:

1. Insert the support CD to the

optical drive.

2. Click the Run Setup Wizard

Utility option from the

installation window.

3. The Setup Wizard utility

window appears.

To launch the Setup Wizard from

the Windows

desktop:

1. Install the device utilities

following the steps in section 3.1.

2. From the Windows

desktop,

click Start > All Programs >

ASUS Utility > Wireless AP

WL-330 > Setup Wizard.

3. The Setup Wizard utility

window appears.

7ASUS Pocket Wireless Access Point (WL-330)

English

Quick Start Guide

Setting up your access point (AP mode)

To setup your access point (AP):

1. The Setup Wizard auto-detects

and displays the device SSID,

channel, encryption, MAC, and IP

addresses. Click Configure to

change these settings.

2. Enter the Network Name (SSID)

and channel you wish to use.

Click the WEP link or the

Encryption tab to set the WEP

encryption.

IMPORTANT! A wireless

client must have the same

SSID and WEP encryption

settings with the ASUS

Pocket Wireless AP to

establish connection.

3. Configure the AP WEP

encryption. Click OK when done.

8ASUS Pocket Wireless Access Point (WL-330)

English

Quick Start Guide

Connecting to an AP or other wireless devices (Ethernet

adapter mode)

The Setup Wizard utility also allows you to use your ASUS Pocket Wireless AP

as an Ethernet adapter that connects to an AP or other wireless device(s).

To connect the ASUS Pocket Wireless AP to an AP or wireless device(s):

1. Switch the ASUS Pocket Wireless AP to Ethernet adapter mode using the

mode switch on the bottom of the device.

2. From the Windows

desktop, click Start > All Programs > ASUS Utility >

Wireless AP WL-330 > Setup Wizard.

3. The Ethernet Adapter Status

window appears and displays the

auto-detected Ethernet adapter

settings. Click Configure to

connect to an AP or wireless

device (s).

NOTE. The available

networks are indicated by

icons for easy identification.

Refer to the icon indications

table in the User Guide for

details.

4. Select a wireless network from

the Available Networks list, then

click Configure.

9ASUS Pocket Wireless Access Point (WL-330)

English

Quick Start Guide

5. Enter the network name (SSID) of

the wireless network you wish to

connect.

6. Select the channel of the wireless

network you wish to connect.

10. Configure the Ethernet adapter

WEP encryption settings.

Click OK when done.

7. Set the Network Type.Select Infrastructure if you wish to connect to an

AP. Select Ad Hoc if you wish to connect to another wireless device.

8. Enable or disable MAC Cloning.

9. Click the WEP link or the Encryption tab.

NOTE. You may select the

channel if you set the

device in an Ad-hoc

network environment. In

Infrastructure network, the

channel is automatically

selected.

IMPORTANT! Change the

device WEP encryption

settings only when your

selected network has an

enabled WEP encryption.

•The SSID and WEP encryption keys of the ASUS Pocket Wireless AP

must be the same with that of the AP or wireless device to establish

connection.

•If you are trying to connect to an AP (Infrastructure), make sure the MAC

address of the ASUS Pocket Wireless AP is included in the AP

authorization table.

10 ASUS Pocket Wireless Access Point (WL-330)

English

Quick Start Guide

Web onfiguration utility

The Web Configuration utility allows you to configure theASUS Pocket Wireless

AP using a web browser on your computer. The following sections provide

information on how to launch this utility.

Launching the Web Configuration utility

To launch the Web Configuration utility using the Device Discovery utility:

1. Click Start > All Programs > ASUS Utility > Wireless AP WL-330 >

Device Discovery.

2. The Device Discovery window

appears.

3. Click Config to launch the Web

Configuration utility.

To launch the Web Configuration utility using a web browser:

1. Open a web browser.

2. Disable your web proxy, if you are using one.

3. Type http://192.168.1.1 on the address bar, then press <Enter>.

NOTE. This option requires you to change the TCP/IP settings of the

network adapter where the ASUS Pocket Wireless AP is connected.

Refer to the User Guide in the support CD for instructions on how to

change the TCP/IP configurations.

Andere Handbücher für (WL-330)

Inhaltsverzeichnis

Andere Asus Drahtloser Zugangspunkt Handbücher

Asus

Asus WL-320gP - Wireless Access Point Bedienungsanleitung

Asus

Asus 54Mbps Bedienungsanleitung

Asus

Asus WL-HDD2.5 Bedienungsanleitung

Asus

Asus RC-AC68U Bedienungsanleitung

Asus

Asus WL 320gE - Wireless Access Point Bedienungsanleitung

Asus

Asus (WL-330) Bedienungsanleitung

Asus

Asus Lyra mini Bedienungsanleitung

Asus

Asus EA-AC87 Bedienungsanleitung

Asus

Asus (WL-330) Bedienungsanleitung

Asus

Asus WL 320gE - Wireless Access Point Bedienungsanleitung

Asus

Asus M2N-VM DH Bedienungsanleitung

Asus

Asus EA-AC87 Bedienungsanleitung

Asus

Asus EA-AC87 Bedienungsanleitung

Asus

Asus EA-AC87 Bedienungsanleitung

Asus

Asus WL-320gP - Wireless Access Point Bedienungsanleitung

Asus

Asus EA-AC87 Bedienungsanleitung

Asus

Asus SpaceLink WL-300 Bedienungsanleitung

Asus

Asus EA-AC87 Bedienungsanleitung

Asus

Asus EA-N66 Benutzerhandbuch

Asus

Asus EA-AC87 Bedienungsanleitung

Asus

Asus WL-330GE - Wireless Access Point Bedienungsanleitung

Asus

Asus WL-330GE - Wireless Access Point Bedienungsanleitung

Asus

Asus WL-300G Bedienungsanleitung

Asus

Asus AiMesh-AC1900 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung