Asus OPTUS DSL-AX5400 Bedienungsanleitung

Modem Router

Quick Start Guide

DSL-AX5400 AX5400 WiFi 6 / NBN Ready

E17460 / First Edition

October 2020

Table of contents

A quick look at your router 3

Setting up your router 4

Button function 5

LED indications 6

FAQs 7

• NBN ready Wireless Router

• Australian Plug

• Quick Start Guide

• Power adapter

• Ethernet cable (RJ-45 cable)

• DSL cable (RJ-11 cable)

Package contents

A quick look at your router

1Power LED 7Reset button

2WiFi LED 8DSL port

3LAN LED 9USB 3.1 Gen 1 port

4DSL/WAN LED 10 LAN 1~4 ports

5Aura LEDs/WPS/WiFi combo button 11 WAN port

6Aura LEDs 12 Power switch

13 Power (DCIN) port

12 3 4 5 6 78910 11 12 13

NOTE If any of the items are damaged or missing, please contact Optus.

1. Attach the Australian plug onto the power adapter.

2. Plug the DC connector end of the power adapter into the DCIN port

of yourrouter, and the plug end into a wall power outlet.

3. If you have a NBN connection box for your service:

Connect the Ethernet cable from the blue WAN port on your router

to the LAN or data port on the NBN device.

If you are not supplied with a NBN connection box for your service:

Connect the DSL cable from the grey DSL port on your router to a

NBN FTTN/B wall socket.

4. Switch on both the wall power outlet and the router to start internet

connection automatically. Wait a few minutes until the DSL/WAN LED

turnssolid white, indicating that the internet is up and running.

Setting up your router

ASUS Router

ASUS

Router

D SL-A X 54 00

NBN FTTN/B

wall socket

Laptop NBN FTTP /

FTTC / HFC /

Fixed Wireless

Wall Power

Outlet

DSL LAN

WAN

Power

Use only the adapter that came with your package. Using other

adapters may damage the device.

Ensure that the correct cabling is connected to receive the NBN service

for your premises. Failure to do so will result in no internetservice.

Considering only one type of NBN is made available to each

premises,you will only need to connect either the DSL or WAN

toreceive internet connection. Refer to step 3 above for details.

Refer to the white label at the bottom of the DSL-AX5400 router

forthe default WiFi SSID and password.

Speciications:

DC Power adapter DC Output: +12V with max. 2.5A current

Operating Temperature 0-40oCStorage 0-70oC

Operating Humidity 50-90% Storage 20-90%

Button function

Press the button on the top cover

for about 2 seconds to perform the

following action:

• Starting the WiFi Protected

Setup(WPS)

You can also change the default action

to either of the following in the router

admin page:

• Turning on or off the Aura LEDs

(pressfor 1 second to change the

Auralighting effects)

• Turning on or off the WiFi connection

Aura LEDs/WPS/

WiFi combo button

2 sec

NOTE

LED Status Indications

Power

LED

Off No power

Solid white Device is working normally

Solid red Device is working abnormally

Flashing red slowly Rescue mode

Flashing white slowly WPS or irmware upgrade in progress

WiFi

LED

Off No WiFi signal

On WiFi connection is ready

Flashing Transmitting or receiving data

via wireless connection

LAN

LED Off No data activity or no physical

connection

On Ethernet connection is established

DSL/

WAN

LED

Off Both DSL and WAN cables are

unplugged

Flashing red slowly DSL/WAN is attempting to connect

tothe NBN

Solid red

Device is ready for coniguration

butinternet connection has not been

established yet

Solid white Internet connection is established

LED indications

FAQs

1. What should I do if there is no internet connection?

• If all indicator LEDs are OFF:

Check if the power adapter is properly connected. Ensure the power

switches on both the wall socket and the router are turned ON, and

check on a different wall outlet if possible.

• If DSL/WAN LED is OFF:

Check if you have wired up the DSL-AX5400 router to your NBN source

via either of the methods below.

(a) If you are also supplied with a NBN connection box for your service,

connect the Ethernet cable from the blue WAN port on your router to

the LAN or data port on the NBN device.

(b) If you are not supplied with a NBN connection box for your service,

connect the DSL cable from the grey DSL port on your router to a NBN

FTTN/B wall socket.

• If DSL/WAN LED is in any colour outside solid white:

Wait a few minutes for the internet to be connected. The DSL-AX5400

router may take up to ive minutes for the irst internet connection

fromnew or factory reset restoration.

• If WiFi is not discoverable from all devices or if all wired devices are not

receiving a valid IP:

Press and hold the reset button until the power LED blinks, and wait up

to ive minutes for the router to be reset to its default settings.

2. Where can I ind the default SSID and password for the

DSL-AX5400 router?

You can ind the default SSID and password from the white label located

at the bottom of your router.

FAQs (continued)

3. How do I access my routers admin page?

Enter either "router.asus.com" or "192.168.0.1" in your preferred browser

toenter the admin page.

Default login: optus

Default password: Same as your default WiFi password on the white

label at the bottom of your router.

4. How do I customize the SSID (WiFi name) and password?

Enter the router admin page, go to Network Map > System Status,

andmake your changes then apply to save settings.

5. How do I change the lighting effect on the DSL-AX5400 router?

Enter the router admin page, then click on Aura RGB option under

System Status to set your preferred lighting effect.

6. How do I link the DSL-AX5400 router to Alexa?

Enter the router web GUI, then click the Alexa & IFTTT tab at the left

navigation panel, and follow onscreen instructions to complete the

linkingprocess. Alexa router skills can be found from:

https://www.asus.com/us/support/FAQ/1033393/.

7. How can I give a speciic device priority access to internet trafic?

Enter the router web GUI, then click the Game tab at the left navigation

panel. Click Add to choose the device, then click +to add devices into the

Game Device List, and Apply to apply changes.

8. What do I do if my game or console reports “Double NAT Detected”?

Enter the router web GUI, then click the Open NAT tab at the left

navigation panel. On the Open NAT screen, click +Add to add your

desirablegame to a speciic gaming device, and OK to save changes.

Inhaltsverzeichnis

Andere Asus WLAN-Router Handbücher

Asus

Asus ZenWiFi AX Mini XD4N Bedienungsanleitung

Asus

Asus RT-AC1300G PLUS Bedienungsanleitung

Asus

Asus PCE-N10 Bedienungsanleitung

Asus

Asus RT-N12 Series Bedienungsanleitung

Asus

Asus WL-500b Bedienungsanleitung

Asus

Asus 4G-AC53U Bedienungsanleitung

Asus

Asus RT-N65R Bedienungsanleitung

Asus

Asus RT-N56U Bedienungsanleitung

Asus

Asus RT-N56U Bedienungsanleitung

Asus

Asus RT-AX58U Bedienungsanleitung

Asus

Asus RT-AC66U B1 Bedienungsanleitung

Asus

Asus WL-500W SuperSpeed N Bedienungsanleitung

Asus

Asus RT-N53 Bedienungsanleitung

Asus

Asus ZenWiFi AX Mini Bedienungsanleitung

Asus

Asus ExpertWiFi EBR63 Bedienungsanleitung

Asus

Asus RT-N66U Dark Knight Bedienungsanleitung

Asus

Asus RT-N53 Bedienungsanleitung

Asus

Asus 4G-AC55U Gebrauchsanweisung

Asus

Asus RT-N56U Bedienungsanleitung

Asus

Asus RT-N300 B1 Bedienungsanleitung

Asus

Asus RT-N10U Bedienungsanleitung

Asus

Asus Lyra Voice Bedienungsanleitung

Asus

Asus RT-AC68U Bedienungsanleitung

Asus

Asus Lyra MAP-AC2200 Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Milesight

Milesight UG67 Bedienungsanleitung

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

NETGEAR

NETGEAR WNR2000v4 Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung

Draytek

Draytek Vigor2120 Series Bedienungsanleitung

Sitecom

Sitecom WLR-4000 Bedienungsanleitung