ASV VT-70 Bedienungsanleitung
VT-70 High Output
Version: EN
Edition: 2019-09
Part Number: 0404-853 (US)
Valid From Serial No: 02001
Original Instructions
Operation and Maintenance Manual
Please fill in before commissioning the machine:
Model: _________________________
Vehicle Serial Number: _________________________
Year of Manufacture: _________________________
Commissioned on: _________________________
Dealer:
CONTENTS
Introduction...................................................... 2
Safety ................................................................. 5
Technical Data.................................................. 29
Machine Description / Controls................. 35
Operation........................................................... 55
Transportation.................................................. 65
Maintenance..................................................... 73
California Proposition 65.............................. 96
1
Page
The operator must read and understand all the instructions in this
manual before operating the machine.
VT-70 High Output US ISO O&M
0404-853 2019-09
1 INTRODUCTION
2
1.1 Product Identification (PIN)
The machine PIN is located on the identification plate, on the side of the operator
enclosure.
Please state the model of the machine and PIN when making inquiries in regards
to parts, service, or warranty.
1.2 Introduction
Thank you for purchasing a VT-70 High Output Compact Track Loader. We
are confident that the machine you have chosen will provide excellent perform-
ance and efficient operation.
The information contained in this manual is intended to provide the operator with
all necessary information for the proper use of the machine.
It is imperative that this manual be provided to the end user at the time of pur-
chase, prior to operation and kept with the machine at all times. If lost or dam-
aged, contact your dealer immediately to obtain a replacement prior to resuming
operation.
The operator is responsible for the safe operation of the machine.
The operator must read, understand and obey the instructions in both this
and the AEM safety manual for skid steer and compact track loaders prior
to operating or performing maintenance or service on the machine.
Should you need clarification or further explanation of the topics in this manual,
please contact your dealer immediately for assistance.
Information describing special equipment or attachments and their operation are
not included in this manual.
This manual should be stored in the provided storage location in the cab of the
machine.
1.3 Safety Alert Symbol
The safety alert symbol is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
1.4 Intended Use
The machine with bucket attachment is intended to be used solely for work con-
sistent with its design. Such work includes loosening, collecting, transporting, and
distributing soil, rock, or similar materials as well as loading these materials onto
trucks, conveyors, or other methods of transport.
VT-70 High Output US ISO O&M
0404-853 2019-09
1 INTRODUCTION
3
After installation of compatible (see section 4.13) special working attachments,
the equipment can be used for corresponding applications.
The operator must follow the operating instructions (manuals) for any externally
supplied components or attachments.
Any use varying from that described here or any lack of adherence to the operat-
ing instructions, maintenance procedures, or replacement intervals described in
this manual shall be regarded as unintended or improper use. The supplier cannot
be held responsible for any damage resulting from improper use. This risk is
borne solely by the user.
1.5 Bulletin Compliance
It is very important to comply with all safety related bulletins. Bulletins are tied to
the most current owner on record. Therefore, it is important that any new owner
contact their local dealer to register the machine in their name. This will ensure
that they will be notified in the event of a safety related bulletin affecting their
machine.
1.6 Contacting the Manufacturer
If you have questions relating to ownership including, but not limited to: accident
reporting, current owner updates, product applications and safety, standards and
regulations compliance, product modifications, transfer of ownership, please
consult your local dealer as the first point of contact.
1.7 Copyright
This manual is intended for use by personnel responsible for operation, mainte-
nance, repair, and supervision activities involving the machine described within.
This manual is copyrighted. It shall not, either in whole or in part, be reproduced,
transmitted, or used for the purpose of competition without our prior written con-
sent.
1.8 Warranty
Your VT-70 High Output is warranted under the Compact Track Loader and Utility
Vehicle Standard Limited New Product Warranty (“Warranty”). A copy of the
Warranty certificate is available from your Authorized VT-70 High Output
Distributor.
VT-70 High Output US ISO O&M
0404-853 2019-09
4
1.9 Tier 4F Compliance Information
In order to comply with tier 4F emissions regulations, the exhaust system in the
VT-70 High Output is equipped with a Diesel Oxidation Catalyst (DOC) that pas-
sively treats the exhaust gasses as they flow through the system. It does not
require operator intervention of any kind. The emissions system on the VT-70
High Output is designed to be tier 4F compliant for the life of the machine.
The tier 4F engine and emissions system in the VT-70 High Output requires Ultra
Low Sulfur Diesel (ULSD) fuel to operate properly. There are special considera-
tions regarding the use and handling of ultra low sulfur diesel fuel. Information on
these topics can be found on the following pages: 18-19 (section 2.10 - Fuel
Handling Precautions) and 34 (section 3.11 - Fluid Specifications).
The VT-70 High Output is also equipped with self-diagnostic features common to
modern diesel engines. Information regarding self-diagnostics can be found on
the following pages: 37 (section 4.1 -
NOTICE
message), 46-48 (section 4.11-1
- main menu and active faults - accessing fault information through the operator
interface).
1 INTRODUCTION
VT-70 High Output US ISO O&M
0404-853 2019-09
2.1 Safety Alert System ................................. 7
2.2 Graphical Symbols................................... 8
2.3 Safety Signs (ISO) ..................................... 12
2.4 General Notes............................................ 14
2.5 Personal Protection Equipment ......... 15
2.6 Hazard Zone............................................... 15
2.7 Operation.................................................... 16
2.8 Stability........................................................ 17
2.9 Transport of Persons ............................... 17
2.10 Fire Prevention ....................................... 18
2.11 Crush / Burn Avoidance ...................... 19
2.12 Placing Into Operation ........................ 20
2.13 Starting the Machine ........................... 20
2.14 Jobsite Safety.......................................... 21
2.15 Parking the Machine ............................ 22
2.16 Towing / Retrieving............................... 22
2.17 Transporting............................................ 23
2.18 Maintenance ........................................... 24
2.19 Battery ....................................................... 26
2.20 Hydraulic Lines / Hoses....................... 27
Page
5
2 SAFETY
VT-70 High Output US ISO O&M
0404-853 2019-09
6
VT-70 High Output US ISO O&M
0404-853 2019-09
This Page Intentionally Left Blank
2 SAFETY
7VT-70 High Output US ISO O&M
0404-853 2019-09
2.1 Safety Alert System
Safety Alert Symbol
This symbol means: Attention! Be alert! Your safety
is involved!
The safety alert symbol is used to alert you to potential
personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or
death.
This symbol is used as an attention-getting device throughout this manual as well
as on decals and labels fixed to the machinery to assist in potential hazard recog-
nition and prevention.
Property or equipment damage warnings in this publication are identified by the
signal word "NOTICE".
“NOTICE” Indicates a hazardous situation which, if not avoided, could
result in property or equipment damage.
NOTICE
2.2 Graphical Symbols
Hazard Avoidance
Pictorial Pictorial Description
Hazard: Skin/Oil Injection
Avoidance:
• Relieve internal pressure before
disconnecting any line or fitting.
• Keep away from leaks or pin-
holes.
• Use cardboard to check for leaks.
Fluid injected into skin must be
surgically removed within a few
hours by a doctor familiar with this
type of injury or gangrene will
result.
Hazard: Fall
Avoidance: Use the provided
access system when entering or
exiting the machine.
Hazard: Rollover / Ejection
Avoidance: Carry loads low, keep
heaviest end of machine uphill at
all times while operating on
inclines.
Hazard: Burn/Scald
Avoidance: Allow to cool before
opening.
8
2 SAFETY
VT-70 High Output US ISO O&M
0404-853 2019-09
Inhaltsverzeichnis
Andere ASV Kompaktlader Handbücher
ASV
ASV POSI-TRACK SR-70 Bedienungsanleitung
ASV
ASV PT-70 Bedienungsanleitung
ASV
ASV PT-80 Bedienungsanleitung
ASV
ASV RT-40 Bedienungsanleitung
ASV
ASV 2810 Bedienungsanleitung
ASV
ASV R Series Bedienungsanleitung
ASV
ASV PT-80 Bedienungsanleitung
ASV
ASV RT60-ROW Bedienungsanleitung
ASV
ASV RC-50 Betriebsanleitung
ASV
ASV RC30 Betriebsanleitung
