II- GENERAL WARNINGS & SAFETY MEASURES
This user manual contains technical specifications, operatingguidelines, operating principles and
other information about the device.
Before connecting the device check that the local gas mains and the device are compatible
(gas pressure and type). See Page 5
Ensure that the gas connection of the device is performed in compliance with the related
standards.
Keep the gas connection equipment of the device away from places with high temperatures.
Perform the device connection near LPG tube or natural gas valve and avoid water ingress.
Ensure that the gas switches and tube (or natural gas line) is turned off while checking the
device. Check gas leakage using soap-foamed water or gas leakage detector.
In case of any gas leakage, the soap-water solution will form foams. While checking with a
detector, control detector gives signals. In case of signal, contact your authorized dealer.
Never use fire while checking gas leakage.
Ensure that no regulator is used other than the recommended regulator for the device
(especially while using LPG tube).
Keep the area where the device is mounted clean and well-ventilated.
Attention; maximum gas pressure that may be applied while the device is running is 50 mbar.
There may be gas leakage risk at pressures more than 50mbar. In such cases the device
may fail and fall outside the scope of the warranty.
Replace the damaged parts with genuine parts. Manufacturing company guarantees that the
device shall be within the warranty scope and safe only when these parts are used.
Use the device on a level surface and fix in on proper fixing pins of under-counter set
manufactured according to the device. See Page 6 (Image -1) (Image-2)
If you detect any malfunction in the device, turn off the LPG tube or the natural gas valve and
immediately contact your authorized dealer. Be careful not to make gas connection before the
repair work of the device is completed.
All repair works should be performed by authorized service personnel. Otherwise, the device
will not be included within the warranty scope.
Manufacturing company is not liable for the damages arising from improper assembly or gas
connection.
Unauthorized repairs performed by people other than the authorized service personnel may
lead to personal injury or damage to machine.
Warranty period of the device is 1 year after the purchase date.
- If you smell gas:
First of all calm down and don't panic.
Turn off the gas tap of the device.
Extinguish burning materials (candle, gasolier, etc.).
Open doors and windows for ventilation.
Be careful not to burn any device.
In case of danger do not touch any electrical switch or socket.
Do not use door bell.
Do not strike match orlighter in dangerous areas.
Do not smoke.
Close the gas valve outside ofthe building.
