AT&T EL41108 Bedienungsanleitung

Quick start guide

EL41108

5.8 GHz cordless

telephone with caller ID/

call waiting

REMOVE

If you subscribe to high-speed Internet service (Digital Subscriber Line - DSL)

through your telephone lines, you must install a DSL filter between the

telephone base and the telephone wall jack. The filter will prevent noise and

caller ID problems caused by DSL interference. Please contact your DSL service

provider for more information about DSL filters.

Your product may be shipped with a protective sticker covering the handset or

telephone base display - remove it before use.

For customer service or product information, visit our website at

www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial

1 (866) 288-4268.

Avoid placing the telephone base too close to:

• Communication devices such as: television sets, VCRs, or other cordless

telephones.

• Excessive heat sources.

• Noise sources such as a window with traffic outside, motors, microwave ovens,

refrigerators, or fluorescent lighting.

• Excessive dust sources such as a workshop or garage.

• Excessive moisture.

• Extremely low temperature.

• Mechanical vibration or shock such as on top of the washing machine or work

bench.

Installation preparation

NOTES:

1. Use only the power adapter supplied with this product or equivalent. To order a replacement

power adapter, visit our website at www.telephones.att.com or call

1 (800) 222-3111.In Canada, dial 1 (866) 288-4268.

2. This power adapter is intended to be correctly oriented in a vertical or floor mount position.

The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-

the-table or cabinet outlet.

Telephone line cord

DSL filter

(available from your DSL

Internet provider.)

Telephone base installation

If you subscribe to high-speed Internet service (Digital Subscriber Line - DSL)

through your telephone lines, you must install a DSL filter between the

telephone base and the telephone wall jack. The filter will prevent noise

and caller ID problems caused by DSL interference. Please contact your DSL

service provider for more information about DSL filters.

Install the telephone base as shown below.

4. Plug the other

end of the

telephone line

cord into a

telephone jack.

5. Plug the

large end of

the power

adapter into

an electrical

outlet not

controlled by

a wall switch.

3. Route cords

through slots.

2. Plug one end of

the telephone

line cord into the

telephone jack

on the underside

of the telephone

base.

1. Plug the small

end of the power

adapter into the

power jack on

the underside of

the telephone

base.

REMOVE

Battery installation & charging

Install the battery as shown below. After installing the battery, you can

make and receive short calls, but replace the handset in the telephone

base when not in use. For optimal performance, charge the handset battery

for at least 16 hours before use. When fully charged, the handset battery

provides approximately five hours of talk time or six days of standby time.

If the handset has not been used for a long time or if the battery inside is

completely depleted, put it on the telephone base for recharging.

Step 1

Insert the battery plug as

indicated, making sure that

it matches the color-coded

label inside the battery

compartment.

Step 4

Charge the handset, by placing the handset

face up in the telephone base. The CHARGE

light on the handset should be on as soon as

the handset is properly placed on the telephone

base.

Step 3

Slide the battery

compartment cover

up until it clicks.

Step 2

Place the battery

and wires inside the

compartment.

CHARGE

light

IMPORTANT INFORMATION

Use only the supplied rechargeable battery, replacement battery (part number 89-1332-00-00) or

equivalent. To order a replacement battery, visit our website at

www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial

1 (866) 288-4268.

Quick reference guide - handset

REMOVE

CID/-VOLUME

When in a menu, press

to scroll down. When the

phone is not in use, press

to display caller ID history

entries. While entering

names or numbers, press

to move the cursor to the

left. During a call, press

to decrease listening

volume.

DIR /VOLUME+

When in a menu, press to

scroll up. When the phone

is not in use, press to

display directory entries.

While entering names, press

to advance the cursor.

During a call, press to

increase listening volume.

PHONE/FLASH

Press to make or answer

a call. During a call, press

to receive an incoming

call if call waiting is

activated.

CHAN/REMOVE

When on a call, press to

scan for a clearer channel

when there is static or

interference on the line.

When in caller ID mode,

press to delete the

displayed caller ID entry,

or press and hold to

delete all caller ID entries

when the phone is not in

use.

OFF/CLEAR

During a call, press to

hang up. While using

menus, press to cancel an

operation, or exit the menu.

MENU/SELECT

Press to display menu.

Press to store a

programming option.

MUTE

While on a call, press to

mute the microphone.

Press again to resume your

conversation.

REDIAL/PAUSE

When the phone is not

in use, press repeatedly

to display the last five

numbers called. While

dialing or entering numbers

to the directory, press to

insert a four-second dialing

pause.

CHARGE

The light is on when

a cordless handset is

properly positioned to

charge in the telephone

base.

Quick reference guide - telephone base

VOICEMAIL

Flashes when there is new

voicemail (requires voicemail

service from your local

telephone company).

HANDSET LOCATOR

Press to make the handset

beep when a handset is not on

the telephone base.

IN USE

• On steady when a handset

is in use.

• Flashes quickly while an

incoming call is ringing.

For complete instructions, please refer to the user’s manual. If you are unable

to find your manual, you may read and/or download the manual at

www.telephones.att.com.

www.telephones.att.com

AT&T and the AT&T logo are trademarks of AT&T Intellectual Property II, L.P. d/b/a

AT&T Intellectual Property licensed to Advanced American Telephones. Printed in China.

Issue 5 AT&T 08/08.

Andere Handbücher für EL41108

Inhaltsverzeichnis

Andere AT&T Schnurloses Telefon Handbücher

AT&T

AT&T CL81309 - AT&T DECT 6.0 Bedienungsanleitung

AT&T

AT&T EL52103 Bedienungsanleitung

AT&T

AT&T E5600 Bedienungsanleitung

AT&T

AT&T CL81109 Bedienungsanleitung

AT&T

AT&T DL72240 Bedienungsanleitung

AT&T

AT&T EL52201 Bedienungsanleitung

AT&T

AT&T CL82114 Bedienungsanleitung

AT&T

AT&T E2812B Bedienungsanleitung

AT&T

AT&T E5911 Bedienungsanleitung

AT&T

AT&T CL82350 Bedienungsanleitung

AT&T

AT&T TL92271 Bedienungsanleitung

AT&T

AT&T CL82309 Bedienungsanleitung

AT&T

AT&T TL86109 Bedienungsanleitung

AT&T

AT&T E5654B Bedienungsanleitung

AT&T

AT&T E2600B Bedienungsanleitung

AT&T

AT&T 9111 Bedienungsanleitung

AT&T

AT&T CL83113 Bedienungsanleitung

AT&T

AT&T E6001 Bedienungsanleitung

AT&T

AT&T CL82107 Bedienungsanleitung

AT&T

AT&T Network Adapter 25 Bedienungsanleitung

AT&T

AT&T EL52201 Bedienungsanleitung

AT&T

AT&T 2320 Bedienungsanleitung

AT&T

AT&T 2256 Bedienungsanleitung

AT&T

AT&T CL81101 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

Panasonic

Panasonic KX-TGP700 Bedienungsanleitung

GE 27930 Bedienungsanleitung

Radio Shack

Radio Shack 43-3557 Bedienungsanleitung