AT&T 1856 - Corded Speakerphone Bedienungsanleitung

Quick start guide

1856

Speakerphone/

answering system with

caller ID/call waiting

VOLUME

During a call, press or to

adjust listening volume.

MUTE

Press to silence the microphone.

Press again to resume

conversation.

SPEAKER

Press to turn the speakerphone

on or off (begin or end a call).

Quick reference guide

CID

When the telephone is idle,

press to display caller ID

information.

While entering numbers, press

twice to insert a three-second

dialing pause.

DISPLAY DIAL

Press to dial the number

currently displayed.

FLASH

During a call, press to receive

an incoming call if call waiting is

activated.

TAS/SETUP

Press to hear setup options.

Press and hold to change

answering system options.

CID/SETUP

Press to customize the

telephone's operation.

PROG/MEM

Press to program a number.

M1/M2/M3

Press to dial a one-touch

number.

CLOCK RESET

Press to review. Press and hold

to set the clock.

REMOVE

Press to delete caller ID currently

displayed.

REDIAL

Press to redial last number

dialed.

DELETE

Press to delete a message

currently playing.

When phone is not in use,

press and hold to delete all old

messages.

REPEAT/MEMO

Press once to repeat a message

currently playing, and press

twice to listen to the previous

messages.

Press to record a memo or

change a menu setting.

ON/OFF

Press to turn answering system

on or off.

SKIP /ANNC

Press to skip a message

or change a menu setting.

Press and hold to record an

announcement.

PLAY/STOP

When the telephone is idle, if

you have new messages, press

to play. Press again to stop mes-

sage playback.

Press and hold to play all mes-

sages (the oldest first)

CID

When the telephone is idle,

press to display caller ID

information.

While entering numbers, press

to delete the last number

entered.

Telephone base installation

NOTES:

1. Use only the power adapter supplied with this product or equivalent. To order a

replacement power adapter, visit our website at www.telephones.att.com,

or call 1 (800) 222-3111.In Canada, dial 1 (866) 288-4268.

2. Be sure to use an electrical outlet not controlled by a wall switch.

3. The power adapters are intended to be correctly oriented in a vertical or floor

mount position. The prongs are not designed to hold the plug in place if it is

plugged into a ceiling or under-the-table/cabinet outlet.

Install the telephone as shown below. Choose a location where the telephone

is not exposed to excessive heat, cold, dust or moisture.

If you subscribe to high-speed Internet service (digital subscriber line - DSL)

through your telephone lines, you must install a DSL filter between the

telephone base and the telephone wall jack. The filter prevents noise and

caller ID problems caused by DSL interference. Please contact your DSL

service provider for more information about DSL filters.

1. Plug one end of the telephone

line cord into the telephone

jack at the back of the

telephone.

2. The small end of the power

adapter has been plugged into

the power jack in the back of

the telephone at the factory.

Double check that it has been

plugged in firmly.

3. Route the cord through the

slot as shown to the right.

4. Plug the other end of the

telephone line cord into a

telephone jack.

5. Plug the large end of the

power adapter into an

electrical outlet not controlled

by a wall switch.

DSL filter (not included)

for DSL users.

Telephone line cord

Getting started

Installation options

Tabletop mount Wall mount

NOTE: The mounting bracket must be used for both tabletop use and wall

mounting positions.

Telephone outlet mounting

plate with mounting studs.

1. To remove the bracket, hold the

telephone base in both hands, press

the two bracket tabs and lift the

bracket away from slots and .

2. Rotate the bracket to the wall mount-

ing position, insert the tabs of the

bracket into slots and on the

telephone base, then press the other

bracket tabs into slots and as

shown below.

Wall mounting

The telephone base comes with the bracket mounted for tabletop use. If wall

mounting is desired, a telephone outlet wall mounting plate with mounting studs is

required. This mounting plate with studs may be available for purchase from many

hardware or consumer electronics retailers and may require professional installation.

Installation options

3. Connect the telephone line cord and

power adapter to the jacks on the back of

the telephone base. Bundle the telephone

line cord, and secure it with a twist tie

before placing it inside the bracket. Please

see the picture on the right.

4. Plug the power adapter into an electrical

outlet not controlled by a wall switch. Plug

the telephone line cord into a telephone

wall jack. To mount the telephone on the

wall, position the mounting holes and

over the telephone outlet mounting studs.

Press and slide the bracket down firmly

so the telephone is held securely on the

telephone outlet mounting studs.

Tabletop installation

To return the bracket from the wall mounting to tabletop position, follow the

directions below.

1. Remove the telephone base from the

wall. Unplug the cords from the wall

jacks. Remove the bracket from the

telephone base.

2. Rotate the bracket to tabletop

position, insert the bracket tabs

into slots and on the tele-

phone base, then press the other

bracket tabs into slots and .

3. Route cords through slots. Plug the

other end of the telephone line cord

into a telephone wall jack. Plug the

large end of the power adapter into

an electrical outlet not controlled by

a wall switch.

Place the bundled telephone

line cord inside the bracket.

www.telephones.att.com

AT&T and the AT&T logo are trademarks of AT&T Intellectual Property II, L.P. d/b/a

AT&T Intellectual Property licensed to Advanced American Telephones,

San Antonio, TX 78219. Printed in China. Issue 6 AT&T 3/09.

Andere Handbücher für 1856 - Corded Speakerphone

Inhaltsverzeichnis

Andere AT&T Telefon Handbücher

AT&T

AT&T 2833 Series Leitfaden

AT&T

AT&T CL84109 Bedienungsanleitung

AT&T

AT&T Telephone Adapter Bedienungsanleitung

AT&T

AT&T 7407 Bedienungsanleitung

AT&T

AT&T ML17928 Bedienungsanleitung

AT&T

AT&T 950 Bedienungsanleitung

AT&T

AT&T CL82311 Bedienungsanleitung

AT&T

AT&T CareLine SN1197 Bedienungsanleitung

AT&T

AT&T TRIMLINE 213 Bedienungsanleitung

AT&T

AT&T TL86109 Bedienungsanleitung

AT&T

AT&T DEFINITY 8101 Bedienungsanleitung

AT&T

AT&T Definity Generic 3 Bedienungsanleitung

AT&T

AT&T EL52315 Bedienungsanleitung

AT&T

AT&T Merlin Legend MLX-20L Bedienungsanleitung

AT&T

AT&T CL80107 Bedienungsanleitung

AT&T

AT&T 984 Bedienungsanleitung

AT&T

AT&T SPIRIT 1224 Controller Bedienungsanleitung

AT&T

AT&T Partner MLS 12D Bedienungsanleitung

AT&T

AT&T EL52103 Bedienungsanleitung

AT&T

AT&T 1187 Bedienungsanleitung

AT&T

AT&T CL82113 Bedienungsanleitung

AT&T

AT&T 1855 - AT&T Corded Phone Bedienungsanleitung

AT&T

AT&T E2555 Bedienungsanleitung

AT&T

AT&T CL2909 Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung

Axess Telecom

Axess Telecom ACW-1xP800 Bedienungsanleitung