AT&T Telephone Adapter Bedienungsanleitung

Telephone Adapter

Install Guide

IMPORTANT: PLEASE

READ AND FOLLOW

THESE INSTRUCTIONS

STEP BY STEP

WELCOME TO

AT&T CALLVANTAGE

SERVICE

AT&T does not represent or warrant that installation by you or a third party

chosen by you will enable you to successfully access or use this service,

nor that any such installation will not cause damage or modiﬁcations

to, or loss of, any of your software, hardware, ﬁles, data, or peripherals.

AT&T and our employees, agents, contractors, and representatives will have

no liability whatsoever for any damages or service problems (including

telephone service) resulting from your, or a third party’s, failure to properly

install, access, or use the equipment, software or services.

This guide will enable you to

install the equipment needed to use

your AT&T CallVantageSM Service.

For instructions on how to use

AT&T CallVantage Service features

once set up is complete, refer to the

Desk/Reference Guide also included in

the kit, or download a complete guide

to features at www.callvantage.att.com

(click User Guide).

CONTENTS

Check Your Package Contents 2

Telephone Adapter Front and Back Illustration 3

Step 1: Gather Information 5

Step 2: Shut off All Equipment 6

Step 3: Connect Equipment 8

Step 4: Turn on Equipment in Order 10

Step 5: Verify Your Connection 12

Step 6: Activate your Telephone Adapter 16

Appendix A: Conﬁguration for Static IP 18

Appendix B: Activating a Replacement TA 19

Appendix C: Troubleshooting 20

Appendix D: Warranty Information 27

Appendix E: Glossary 28

Technical Support 29

Telephone Cord (Grey)

You can use this to connect

your telephone to the TA.

Ethernet Cable (Blue)

You can use this to connect

your TA to your computer or

router.

D-Link Telephone Adapter

This will be referred to as the TA

from this point forward.

12V 1A DC Power Adapter

Using a power supply with

a different voltage rating will

damage and void the warranty

of this product.

Rubber Feet

You can use these on the

bottom of your TA.

CHECK YOUR PACKAGE CONTENTS

TELEPHONE ADAPTER FRONT AND BACK ILLUSTRATION

123459876 1110

1 Power LED

A solid green light indi-

cates that the unit

is powered correctly.

2 Status LED

The red status light will

blink until the TA has

been activated. Once the

TA has been successfully

connected with the AT&T

CallVantageSM Service,

it will light solid green.

The Status light will also

turn a blinking amber

color while downloading

the TA conﬁguration

ﬁle or ﬁrmware updates.

IMPORTANT: DO NOT

power off your TA if the

Status LED light is amber.

3 WAN LED

A solid green light indi-

cates connection on the

WAN port. This LED blinks

during data transmission.

This light will blink while

downloading a conﬁgura-

tion ﬁle.

4 Ethernet LEDs

10M / 100M

A solid green indicates

a 100 Mb connection.

When this light is

off but the Link/Activity

light is green you have

a 10 Mb connection.

Link / Activity

Blinks during data trans-

mission. Off indicates no

connection.

5 Phone LED

PSTN/VoIP

This light is inactive

with the PSTN/VoIP

switch in the default

“VoIP” setting.

Hook / Ring

A solid green light indi-

cates that the phone is off

hook. When the light is

off this indicates that your

phone is on hook.

6 Receptor for Power

Adapter.

7 PSTN/VoIP Switch

By default, the switch

is set to VoIP.

8 Reset Button

Pressing this button re-

stores the TA to its original

factory default settings.

Note: To reset the TA, hold

the reset button down

WHILE you power up the

box, then continue to

HOLD the reset button.

9 WAN Port

This port is for the con-

nection of an Ethernet

cable to the cable or DSL

modem.

10 Ethernet Port

This port is for the con-

nection of an Ethernet

cable to your computer.

11 Phone Port

This port is for the

connection for an

RJ-11 telephone cord

to a phone.

IMPORTANT

Follow the instructions in this guide step by step

and in the exact order presented.

Prior to proceeding:

– Read through this guide thoroughly.

– Make sure you have a cable or DSL Internet connection

(not dial-up or satellite).

– Make sure your cable/DSL Internet connection is working

(i.e. you can browse to a known website like www.att.com)

If your cable/DSL Internet connection is not working,

you must contact your cable/DSL service provider to resolve

the issue prior to installing your TA.

1GATHER

INFORMATION

A Note whether you have a single computer

connected directly to your cable/DSL

modem, or one or more computers

connected through a home router.

1234567

890

qwert uio

asdfghjk

xcvbnm,

! $%

QWERT UI

ASDFGHJK

Follow the instructions under

this icon if you have a single

computer connected directly to

your cable/DSL modem.

1234567

890

qwert uio

asdfghjk

xcvbnm,

! $%

QWERT UI

ASDFGHJK

Follow the instructions under

this icon if you have one or more

computers connected through a

home router.

For Static IP, see Appendix A ,page 18.

To activate a replacement TA, see Appendix B, page 19.

For integrated modem/home routers, see Troubleshooting, page 25.

B Make sure you have the following information

before you start your TA installation:

For all users

AT&T CallVantage Service

User ID

Your 10-digit AT&T

CallVantage Service

number (provided in your

order conﬁrmation e-mail)

AT&T CallVantage Service

password

You selected this when

you ordered the service;

if you forgot it, go to

www.callvantage.att.com

and click “Forgot your

password?”

If you have DSL

DSL Provider (PPPoE)

username

You must get this from your

DSL provider

DSL Provider (PPPoE)

password

You must get this from

your DSL provider

If you have a home router

Home router user manual

The user manual you received along with your home

router. Many manufacturers let you download this from

their website.

C Proceed to Step 2.

A Shut down your computer. If your cable/

DSL modem has a power switch, turn it off.

B Unplug your cable/DSL modem from its power

outlet. (You should perform this step even if

you set its power switch to off.)

C Leave your modem powered down for at least

5 minutes.

D Proceed to Step 3, page 8.

1234567

890

qwert uio

asdfghjk

xcvbnm,

! $%

QWERT UI

ASDFGHJK

FOR SINGLE COMPUTER CONNECTED

DIRECTLY TO CABLE/DSL MODEM

ETHERNET

PORT

ETHERNET

POWER

OFF

ETHERNET

PORT

OFF

WAN/

UPLOAD PORTS

ETHERNET

PORT

ETHERNET

POWER

OFF OFF

Cable/DSL

Jack

Personal ComputerCable/DSL

Modem

Cable/DSL

Jack

Personal Computer(s)RouterCable/DSL

Modem

SHUT OFF ALL

EQUIPMENT

!IMPORTANT! Shut down and unplug each

device separately (i.e. don’t simply shut off

your powerstrip.)

ETHERNET

PORT

ETHERNET

POWER

OFF

ETHERNET

PORT

OFF

WAN/

UPLOAD PORTS

ETHERNET

PORT

ETHERNET

POWER

OFF OFF

Cable/DSL

Jack

Personal ComputerCable/DSL

Modem

Cable/DSL

Jack

Personal Computer(s)RouterCable/DSL

Modem

A Shut down all computers connected to your

home router (including those connected

wirelessly). If your cable/DSL modem and home

router have power switches, turn them off.

B Unplug your cable/DSL modem and home router

from their power outlets. (You should perform this

step even if you set their power switches to off.)

C Leave your modem powered down for at least

5 minutes.

D Proceed to Step 3 (for one or more computers

connected via home rounter), page 9.

FOR ONE OR MORE COMPUTERS

CONNECTED THROUGH HOME ROUTER

1234567

890

qwert uio

asdfghjk

xcvbnm,

! $%

QWERT UI

ASDFGHJK

!IMPORTANT! Shut down and unplug each

device separately (i.e. don’t simply shut off

your powerstrip.)

3CONNECT

EQUIPMENT

A Set up your cabling as shown in the diagram above.

B Make sure the PSTN/VoIP switch on the back of the TA is set to “VoIP.”

C Proceed to Step 4, page 10.

1234567

890

qwert uio

asdfghjk

xcvbnm,

! $%

QWERT UI

ASDFGHJK

FOR SINGLE COMPUTER CONNECTED

DIRECTLY TO CABLE/DSL MODEM

OFF

WAN/

UPLOAD

RESET

CONSOLEPSTN

VoIP

WAN ETHERNET

12V 1A 2 1 LINE

ETHERNET

POWER

OFF

ETHERNET

PORT

OFF

PORTS

ETHERNET

PORT

OFF

RESET

CONSOLEPSTN

VoIP

WAN ETHERNET

12V 1A 2 1 LINE

ETHERNET

PORT

ETHERNET

POWER

OFF OFF

Cable/DSL

Jack

Telephone Adapter Personal ComputerTelephoneCable/DSL

Modem

Cable/DSL

Jack

Personal Computer(s)RouterTelephoneTelephone AdapterCable/DSL

Modem

( U S E E X I S T I N G C A B L E ) ( U S E N E W C A B L E )

Telephone Cord

( U S E E X I S T I N G C A B L E ) ( U S E N E W C A B L E )

Telephone Cord

NOTE The connection between the cable/DSL modem

and the cable/DSL jack should remain unchanged.

!IMPORTANT! Your existing Ethernet cable should

be between your cable/DSL modem and your TA.

This will ensure any special cabling you received

from your Internet Service Provider is between

your modem and your TA.

Inhaltsverzeichnis

Andere AT&T Telefon Handbücher

AT&T

AT&T CL2909 Bedienungsanleitung

AT&T

AT&T 5870 Bedienungsanleitung

AT&T

AT&T E5865 Bedienungsanleitung

AT&T

AT&T 272 Bedienungsanleitung

AT&T

AT&T 992 Bedienungsanleitung

AT&T

AT&T Merlin Legend MLX-20L Bedienungsanleitung

AT&T

AT&T Partner MLS 34D Bedienungsanleitung

AT&T

AT&T E2555 Bedienungsanleitung

AT&T

AT&T MS2085 Bedienungsanleitung

AT&T

AT&T 360 Bedienungsanleitung

AT&T

AT&T 9370 Bedienungsanleitung

AT&T

AT&T 7620 Bedienungsanleitung

AT&T

AT&T E2520 Bedienungsanleitung

AT&T

AT&T Merlin Legend MLX-20L Bedienungsanleitung

AT&T

AT&T CD4930 Bedienungsanleitung

AT&T

AT&T CL82115 Bedienungsanleitung

AT&T

AT&T Trimline TR1909 Bedienungsanleitung

AT&T

AT&T 929 Bedienungsanleitung

AT&T

AT&T CL82115 Bedienungsanleitung

AT&T

AT&T TRIMLINE 265 Bedienungsanleitung

AT&T

AT&T CRL81212 Bedienungsanleitung

AT&T

AT&T Definity 7313H Bedienungsanleitung

AT&T

AT&T 945 Bedienungsanleitung

AT&T

AT&T ISDN 8510T Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung

Axess Telecom

Axess Telecom ACW-1xP800 Bedienungsanleitung