AT&T Trimline 260 Bedienungsanleitung

Trimline®Caller ID

Telephone 260

Please also read

Part 1 — Important

Product Information

AT&T and the Globe Design are registered trademarks ofAT&T Corp.licensed toAdvancedAmericanTelephones.

USER’S MANUAL

Part 2

REVISED

DRAFT

4/24/02

260book_1ATT 4/24 4/24/02 6:24 PM Page ii

Printed in China. Issue 1AT&T 04/02

260book_1ATT 4/24 4/24/02 6:24 PM Page iii

BEFORE YOU BEGIN . . . . . . . 1

About Caller Identification

(Caller ID) . . . . . . . . . . . . . . . . 1

About Home Area Code and

Local Area Codes . . . . . . . . . . . 2

INSTALLATION . . . . . . . . . . . 3

Battery Installation . . . . . . . . . . . . 3

Telephone Installation . . . . . . . . . 4

FEATURE SETTINGS . . . . . . . . 8

Feature Settings Summary . . . . . . . 8

Language Selection . . . . . . . . . . . 10

Set Home Area Code . . . . . . . . . 11

Set Local Area Codes . . . . . . . . . 12

Display Screen Options . . . . . . . . 13

TELEPHONE OPERATION . . . . 15

Making and Answering Calls . . . . 15

Redial . . . . . . . . . . . . . . . . . . . . 15

Handset Volume . . . . . . . . . . . . . 15

Mute . . . . . . . . . . . . . . . . . . . . . 15

RINGER Volume . . . . . . . . . . . . . 16

New Call Light . . . . . . . . . . . . . . 17

Line Status Indicator . . . . . . . . . . 17

Clear . . . . . . . . . . . . . . . . . . . . . 17

Flash/Call Waiting . . . . . . . . . . . . 17

TELEPHONE MEMORY . . . . . 18

Directory Card . . . . . . . . . . . . . . 18

Storing Memory Numbers . . . . . . 19

Storing a Pause in a

Memory Number . . . . . . . . . . . 19

One-Touch Dialing . . . . . . . . . . . 19

Dialing Numbers in Memory . . . . 19

CALLER ID OPERATION . . . . . 20

About Caller Identification . . . . . . 20

Call History . . . . . . . . . . . . . . . . 21

Reviewing Call History . . . . . . . . 21

Display Dial . . . . . . . . . . . . . . . . 21

Display Dial Options . . . . . . . . . 21

Storing a Call Record

into Memory . . . . . . . . . . . . . . 22

Removing Call Records

from Call History . . . . . . . . . . . 22

Setting Screen Display Options . . 22

Display Screen Messages . . . . . . . 23

IN CASE OF DIFFICULTY . . . . 24

CONTENTS

260book_1ATT 4/24 4/24/02 6:24 PM Page v

About Caller Identification (Caller ID)

This product has a Caller ID with CallWaiting feature that works with

service available from your local phone service provider.

Caller ID with CallWaiting lets you see who’s calling before you answer

the phone,even when you’re on another call.

You may need to change your phone service to use this feature. Contact

your phone service provider if:

• You have both Caller ID and CallWaiting,but as separate services

(you may need combined service)

• You have only Caller ID service,or only CallWaiting service

• You don’t subscribe to any Caller ID or CallWaiting services.

You can also use this product with regular Caller ID service,or with no

Caller ID services.

There are fees for Caller ID services,and they may not be available in all

areas.

Depending on your service,you may see the caller’s number,or the caller’s

name and number. This product can provide information only if both you

and the caller are in areas offering Caller ID service,and if both telephone

companies use compatible equipment. The time and date are sent by the

service provider along with the call information.

BEFORE YOU BEGIN

260book_1ATT 4/24 4/24/02 6:24 PM Page 1

About Home Area Code and Local Area Codes

Always program your home area code,and,if you need them,up to four

local area codes (see“Set HomeArea Code”and“Set LocalArea Codes”on

pages 11 and 12). Programming these area codes changes how numbers

are displayed in the call history,and allows for correct operation of the

Display Dial feature.

Refer to the chart below to determine whether you will need to program

LocalArea Codes after you install your phone.

If you dial… For… Then, in Steps 2-4

on page 12

11 digits All calls outside Make no entry

(1+ area code + phone number) your own area code

10 digits Some calls outside Enter area codes that

(area code + phone number) your own area code do not require a “1”

10 digits All calls within your Enter your own area

(area code + phone number) own area code code

BEFORE YOU BEGIN

260book_1ATT 4/24 4/24/02 6:24 PM Page 2

INSTALLATION

Battery Installation

This telephone requires fourAA batteries (not included) in order for the

Caller ID with CallWaiting,Memory,and New Call light to work. For best

results use alkaline or heavy duty batteries

1Press on the tab to remove the battery compartment cover.

2Install fourAA

batteries (not

included) in

the battery

compartment. 3Replace the battery

compartment cover

by aligning the

bottom tabs on the

cover with the slots

on the base and

snapping into place.

NOTE: Once the batteries are installed, the screen will show12:00 and

the clock will begin to run. The clock will be reset to the correct time

when the first Caller ID data is received.

Battery

compartment

cover

Battery compartment

recess for easy battery

removal

260book_1ATT 4/24 4/24/02 6:24 PM Page 3

Telephone Installation

Wall Installation

1Plug one end of the line cord into the telephone line jack.

INSTALLATION

2Feed the line cord into the channel and wind it around and out of the

mounting area as shown.

3Connect the other end to a telephone jack not controlled by a switch.

4Mount the phone on the wall as shown,then continue with the steps

in“ForTable/Desk andWall Installation”on page 7.

Telephone

line jack Line cord

Mounting

area

Modular telephone

wall jack

Channel

260book_1ATT 4/24 4/24/02 6:24 PM Page 4

INSTALLATION

Table/Desk Installation

1Reposition mounting adapter on the base to table/desk position.

a) Remove mounting adapter from the

base by pressing down with your

thumbs as indicated by the arrows.

c) Replace mounting adapter on base

by aligning it as shown and pushing

up with your thumbs as indicated

by the arrows.

b) Turn mounting adapter so that the

channel is up top as shown.

260book_1ATT 4/24 4/24/02 6:24 PM Page 5

INSTALLATION

Modular

telephone wall

jack

2Plug one end of the line cord into

the telephone line jack.

3Feed the line cord through

the channel as shown (so

the phone will sit flat).

4Connect the other end

to a telephone jack not

controlled by a wall

switch,then continue

with the steps in

“ForTable/Desk and

Wall Installation”

on page 7.

Line cord

Channel

Telephone

line jack

260book_1ATT 4/24 4/24/02 6:24 PM Page 6

For Table/Desk and Wall Installation

Coiled cord

INSTALLATION

1Plug the coiled cord

into the jack on the

base. Plug the other

end into the handset,

then hang up.

2Lift the handset and

listen for a dial tone.

If you can’t hear a dial

tone,see IN CASE OF

DIFFICULTY.

3Set RINGER switch to

LO,HI or OFF. If the

RINGER switch is set

to OFF,you will not

hear this phone ring

when you have an

incoming call.

Your phone will work immediately after installation using the default

feature settings (see Feature Settings Summary on next page). You can

make and answer calls as soon as the phone is connected to a telephone

jack,but you must install the batteries for the screen,Caller ID features

and memory to work (see“Battery Installation”).

NOTE: If you subscribe to Caller ID services from your local telephone

service provider, you must follow the instructions in “Set Home Area

Code” on page 11 for your phone to properly recognize and dial calls,

and you may need to follow the instructions in“Set Local Area Codes”

on page 12.

260book_1ATT 4/24 4/24/02 6:24 PM Page 7

Inhaltsverzeichnis

Andere AT&T Telefon Handbücher

AT&T

AT&T 1856 - Corded Speakerphone Bedienungsanleitung

AT&T

AT&T MLS-Series Referenzhandbuch

AT&T

AT&T CL2909 Bedienungsanleitung

AT&T

AT&T 902 Bedienungsanleitung

AT&T

AT&T Merlin Bedienungsanleitung

AT&T

AT&T Syn248 SB35020 Bedienungsanleitung

AT&T

AT&T 982 Bedienungsanleitung

AT&T

AT&T EL52103 Bedienungsanleitung

AT&T

AT&T 993 Bedienungsanleitung

AT&T

AT&T Legend Setup For Merlin Mail Bedienungsanleitung

AT&T

AT&T Merlin Legend MLX-10D Bedienungsanleitung

AT&T

AT&T CL4939 Bedienungsanleitung

AT&T

AT&T MS2085 Bedienungsanleitung

AT&T

AT&T Generic 1 Bedienungsanleitung

AT&T

AT&T 906 Bedienungsanleitung

AT&T

AT&T BELL 540 Series Einrichtungshandbuch

AT&T

AT&T SynJ SB67118 Bedienungsanleitung

AT&T

AT&T System 75 Bedienungsanleitung

AT&T

AT&T E2555 Bedienungsanleitung

AT&T

AT&T MERLIN LEGEND MLX-10 Non-Display Telephone Bedienungsanleitung

AT&T

AT&T 1040 Bedienungsanleitung

AT&T

AT&T 17939 Bedienungsanleitung

AT&T

AT&T SynJ SB67158 Bedienungsanleitung

AT&T

AT&T Partner 34D Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung

Axess Telecom

Axess Telecom ACW-1xP800 Bedienungsanleitung