AT&T Trimline TR1909 Bedienungsanleitung

Quick start guide

TR1909

Trimline® telephone

with caller ID/call waiting

Make sure to install four

AA alkaline batteries

(not included) before

using the telephone.

See page 4 for easy

instructions.

Parts checklist ..................................1

Handset layout .................................2

Battery installation.........................4

Telephone installation ..................5

Wall installation...............................6

Switching from wall

installation to desktop............8

About the feature menu..............9

Feature summary.............................9

Basic telephone operation ......10

Options while on calls...............11

Storing numbers in memory...12

Troubleshooting ............................14

Important safety

information ................................16

FCC and ACTA information......17

FCC Part 15.....................................18

Limited warranty...........................19

Technical specifications ............21

Table of contents

This quick start guide provides you basic installation and use

instructions. A limited set of features are described in abbreviated

form.

Please refer to the complete on-line TR1909 Trimline®

telephone with caller ID/call waiting user’s manual for a full set

of installation and operation instructions at

http://www.telephones.att.com/manuals/TR1909.

Before using this AT&T product, please read Important safety

information on page 16 of this quick start guide.

Introduction

Parts checklist

Save your sales receipt and original packaging in the event warranty

service is necessary.

Your telephone contains the following items:

Handset

Telephone base with

telephone line cord and

mounting bracket

Coiled handset cord

Quick start guide

Handset layout

OPTION/SELECT

Press to display the

setting options.

While in the option

menu, press to save the

selection and move to

the next feature.

While reviewing the call

log, press repeatedly to

show different dialing

formats.

FLASH

When there is a call

waiting signal, press

FLASH to put the current

call on hold and connect

to the new call. Press

FLASH again to return to

the original call.

Press FLASH to activate

other telephone company

subscriber services such

as three-way calling.

IN USE light

Flashes quickly when

there is an incoming

call.

Flashes slowly when

the telephone line cord

is not plugged into a

wall jack or another

telephone on the same

line is in use.

On when the telephone

line is in use.

CALL LIST /

When the telephone

is idle, press to display

caller ID information.

CLEAR

Press to exit storing a

number in memory, to

exit the call log, or to

return to the idle screen

anytime without saving

the changes.

DISPLAY DIAL

Press to dial the number

currently displayed.

REMOVE

While reviewing the call

log, press to delete the

entry currently displayed,

or press and hold to

remove all entries.

MEMORY

Press to access telephone

numbers stored in the

speed dial memory.

Listening volume

Slide to adjust the

handset listening volume

to LO, MED or HI.

PAUSE/REDIAL

When the handset is

lifted, press to redial

the last number dialed.

When storing a number

in the memory, press to

insert a three-second

dialing pause.

PROG

Press to store a

telephone number in

the memory.

M1, M2, M3

When the handset is

lifted, press to dial a

number from the

one-touch memory.

MUTE

Press and hold MUTE to

silence the microphone

to prevent the other

party from hearing you;

you are still able to hear

the other party. Release

MUTE to return to the

conversation.

Switch hook

When held down, the

telephone is in idle

mode.

When released, the

telephone is ready to

make a call.

Handset layout

Dialing keys

Press to dial a number.

Before using the telephone, install four good AA alkaline batteries

(not included) to provide memory backup, and to enable features

such as caller ID and the IN USE light. If good batteries are not

installed, the display only works when you lift the handset. When

operating in this mode, the display may be dimmer than usual. It

is recommended that you install new batteries soon after the low

battery icon appears.

Follow the steps below to install batteries:

Press on the tab and lift

to open the cover of the

battery compartment.

1. Install four new AA batteries

(not included) in the battery

compartment according to

the engraved labels, +and -,

in the compartment. Place

the batteries above the

battery strap.

Close the battery compartment cover. Make sure it clicks into place.3.

Battery installation

NOTES:

Do not mix old and new batteries, and do not mix alkaline and standard (carbon-

zinc) batteries.

Always disconnect the telephone line from the telephone wall jack before

replacing batteries.

Install new batteries every six months to maintain the call log and telephone

memory.

•

Lift this tab

to open.

Press this tab

to release.

If you subscribe to high-speed Internet service (DSL - digital

subscriber line) through your telephone lines, you must install a

DSL filter between the telephone line cord and the telephone wall

jack. The filter prevents noise and caller ID problems caused by

DSL interference. Please contact your DSL service provider for more

information about DSL filters.

Install the telephone as shown below:

Telephone installation

Plug one end of the coiled

handset cord into the handset

jack on the left side of the

telephone base. Plug the other

end into the handset.

One end of the telephone

line cord has been installed

into the telephone jack at the

bottom of the telephone base.

Route the telephone line cord

through the slot as shown.

DSL filter

(not included)

Plug the other end of the cord

into a telephone wall jack.

Put the handset on the

telephone base.

Your telephone base is ready for desktop use. If you want to mount

your telephone on a wall, use the provided mounting bracket to

connect with a standard dual-stud telephone wall mounting plate.

If you do not have this mounting plate, you can purchase one from

many hardware or consumer electronic retailers. You may need

professional assistance to install the mounting plate.

To install the telephone base in the wall mount position, make sure

that you first unplug the telephone line cord from the telephone

wall jack and remove it from the slot under the telephone base.

Lift the handset and place it aside. On the telephone base, pull

out the handset tab and rotate it 180 degrees. Replace the

handset tab into the grooves until it clicks into position.

Wall installation

Remove the mounting bracket from the base. Hold the telephone

base with both hands and then slide the bracket upwards as the

arrows indicate.

Wall installation

Rotate the bracket 180 degrees to the wall mounting position.

Push the bracket upwards as shown until it clicks into place.

Route the telephone line cord through the slot as shown and plug

the other end of the cord into a telephone wall jack. To mount

the telephone on the wall, position the mounting holes A and B

over the telephone outlet mounting studs. Slide the bracket down

firmly so the telephone is held securely on the studs.

Place the handset back on the telephone base.5.

DSL filter

(not included)

Switching from wall installation to desktop

To return the bracket from wall mount position to desktop use,

follow the instructions below:

Remove the telephone base from the mounting plate. Unplug

the telephone line cord from the telephone wall jack and

remove the cord from the slots under the telephone base.

Lift the handset and place it aside. On the telephone base, pull

out the handset tab and rotate it 180 degrees. Replace the

handset tab back to the grooves until it clicks into position.

Remove the bracket

from the base. Hold the

telephone base firmly

and then slide the

bracket downwards as

the arrows indicate.

3. Rotate the bracket to the desktop

installation position. Push the

bracket down as shown below until

it clicks into place.

Follow steps 2-4 in Telephone installation on page 5 to install

your telephone for desktop use.

Andere Handbücher für Trimline TR1909

Inhaltsverzeichnis

Andere AT&T Telefon Handbücher

AT&T

AT&T ML17939 Bedienungsanleitung

AT&T

AT&T CD4930 Bedienungsanleitung

AT&T

AT&T 1080 Bedienungsanleitung

AT&T

AT&T 7630 Bedienungsanleitung

AT&T

AT&T Aastra 6731i Bedienungsanleitung

AT&T

AT&T SB67030 Bedienungsanleitung

AT&T

AT&T 9370 Bedienungsanleitung

AT&T

AT&T CL4940 Bedienungsanleitung

AT&T

AT&T 945 Bedienungsanleitung

AT&T

AT&T MERLIN LEGEND Release 2.0 Analog Multiline... Handbuch

AT&T

AT&T Partner 34D Bedienungsanleitung

AT&T

AT&T TL86109 Bedienungsanleitung

AT&T

AT&T SPIRIT 2448 Expansion Unit Stücklistenhandbuch

AT&T

AT&T 360 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

AT&T

AT&T BELL 2563HB Bedienungsanleitung

AT&T

AT&T MDW 9000 Bedienungsanleitung

AT&T

AT&T CL84109 Bedienungsanleitung

AT&T

AT&T 830 Bedienungsanleitung

AT&T

AT&T Definity 7406 Plus Bedienungsanleitung

AT&T

AT&T TRIMLINE 210 Bedienungsanleitung

AT&T

AT&T CL4939 Bedienungsanleitung

AT&T

AT&T Trimline TR1909 Bedienungsanleitung

AT&T

AT&T 145 Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung

Axess Telecom

Axess Telecom ACW-1xP800 Bedienungsanleitung