AT&T Trimline TR1909 Bedienungsanleitung

For customer service or product

information, visit our website at

www.telephones.att.com

or call 1 (800) 222-3111. In

Canada, dial 1 (866) 288-4268.

Quick start guide

TR1909

Trimline® telephone

with caller ID/call waiting

Handset layout

OPTION

Press to display the

setting options.

While in the option

menu, press to save

the selection and move

to the next feature.

While viewing the call

log, press to show

dialing formats.

IN USE light

Flashes quickly when

there is an incoming

call.

Flashes slowly when

the telephone line cord

is not plugged into a

wall jack or another

telephone on the same

line is in use.

CALL LIST /

When the telephone

is in idle mode, press

to display caller ID

information.

CLEAR

Press to exit dialing, to

exit storing a number

in memory, to exit the

call log, or to return to

the idle screen anytime

without saving the

changes.

REMOVE

While viewing the call

log, press to delete

the entry currently

displayed,

press and hold to

remove all entries.

FLASH

When there is a call

waiting signal, press

FLASH to put the current

call on hold and connect

to the new call. Press

FLASH again to return to

the original call.

Press FLASH to activate

other telephone company

subscriber services such

as three-way calling.

DISPLAY DIAL

Press to dial the number

currently displayed.

MEMORY

Press to access

telephone numbers

stored in the memory.

Listening volume

Slide to adjust the

handset listening

volume to LO, MED,

or HI.

PAUSE/REDIAL

When the handset is

lifted, press to redial

the last number dialed.

When storing a

number in the

memory, press to

insert a three-second

dialing pause.

PROG

Press to store a

telephone number in

the memory.

M1, M2, M3

Press to dial a one-

touch number from the

memory.

MUTE

Press and hold MUTE to

silence the microphone

to prevent the other

party from hearing you,

but you are still able to

hear the other party.

Release MUTE to return

to the original two-way

conversation.

Switch hook

When held, the

telephone is in idle

mode.

When released, the

telephone is ready to

make a call.

Handset layout

Screen icons

CALL#

NEW

REP 0110 : 03AM 12/01

800-222-3111

LOW

TOTAL 12 NEW 01

Screen display messages

CALL# Call number in the call log.

NEW New (unreviewed) call.

REP Repeat call from the same number.

The telephone line cord is not plugged into

the wall jack.

The telephone or another telephone on the

same line is in use.

•

LOW

The battery power is low.

Screen display messages

REMOVE ALL? Remove all call log entries.

-END OF LIST- You have reached the end of the

call log entries.

Pro Program a one-touch or two-

touch memory.

LIFT RECEIVER A caller ID entry is ready to be

dialed by lifting the handset.

TOTAL XX NEW XX The total and new (unreviewed)

calls in the call log.

Battery installation

Before using the telephone, you should install four good AA

alkaline batteries (not included) to provide memory backup

and enable the use of some features. The four AA batteries are

required for caller ID features and the IN USE light to work. If

good batteries are not installed, the display only works when you

lift the handset.

If you unplug the telephone from the wall jack, or you lose

telephone service for over 10 minutes, and good batteries are not

installed, the following information is lost: call list, numbers stored

in one-touch and two-touch memory, redial list, and all settings in

the feature menu. It is recommended that you install new batteries

soon after the low battery icon appears.

Follow the steps below to install the batteries:

Press on the tab and lift to open the cover of the battery

compartment.

Lift this

tab to

open.

Press this

tab to

release.

3. Close the battery

compartment cover. Make

sure it clicks into place.

NOTES:

Do not mix old and new batteries and do not mix alkaline and standard

(carbon-zinc) batteries.

When the batteries are installed, the screen will show 12:00 and the clock will

begin to run. It will reset to the correct time when the first caller ID data is

received.

Always disconnect all telephone lines from the wall outlets before replacing

batteries.

Install new batteries every six months to maintain the call log and telephone

memory.

•

Battery installation

2. Install four new AA batteries

(not included) in the battery

compartment according to

the labels + and - engraved

in the compartment.

If you subscribe to high-speed Internet service (digital subscriber

line - DSL) through your telephone lines, you must install a DSL

filter between the telephone line cord and the telephone wall

jack. The filter prevents noise and caller ID problems caused by

DSL interference. Please contact your DSL service provider for

more information about DSL filters. Install the telephone as shown

below.

If you have DSL high speed

Internet service, a DSL filter

(not included) is required.

Telephone installation

Plug one end of the coiled

handset cord into the

handset jack on the left

side of the telephone base.

Plug the other end into the

handset.

One end of the

telephone line cord has

been installed into the

telephone jack on the

bottom of the telephone

base.

Thread the telephone line

cord through the channel

and out of the mounting

area as shown.

Plug the other end of the

telephone line cord into a

telephone wall jack.

Put the handset on the

telephone base.

Installation options

Wall installation

To install the telephone base in the wall-mount position, make

sure that you first unplug the telephone line cord from the

telephone wall jack and remove it from the channel.

1. Lift the handset and place it aside. On the telephone base, pull

out the handset tab and rotate it 180 degrees. Replace the

handset tab back to the grooves until it clicks into position.

Your telephone base is ready for tabletop use. If you want to

mount your telephone on a wall, use the provided wall-mount

bracket to connect with a standard dual-stud telephone wall-

mounting plate. If you do not have this mounting plate, you

can purchase one from many hardware or consumer electronic

retailers. You might need a professional to install the mounting

plate.

2. Remove the bracket

from the base. Hold the

telephone base with both

hands and then slide the

bracket upwards as the

arrows indicate.

3. Rotate the bracket to the

wall installation position.

Push the bracket upwards

as shown below until it

clicks into place.

Installation options

4. Route the telephone line cord

through the slot as shown

below and plug the other end

of the telephone line cord

into a telephone wall jack. To

mount the telephone on the

wall, position the mounting

holes A and B over the

telephone outlet mounting

studs. Slide the bracket

down firmly so the telephone

is held securely on the

telephone outlet mounting

studs.

DSL filter

(not included)

Tabletop installation

To return the bracket from the wall installation to tabletop use,

follow the instructions below.

2. Lift the handset and place it aside. On the telephone base, pull

out the handset tab and rotate it 180 degrees. Replace the

handset tab back to the grooves until it clicks into position.

1. Remove the telephone base from the wall mounting plate.

Unplug the telephone line cord from the telephone wall jack

and remove the cord from the slots under the telephone base.

5. Place the handset back on the telephone base.

Installation options

Andere Handbücher für Trimline TR1909

Inhaltsverzeichnis

Andere AT&T Telefon Handbücher

AT&T

AT&T 1477/1177 Bedienungsanleitung

AT&T

AT&T E5865 Bedienungsanleitung

AT&T

AT&T CL2939 Bedienungsanleitung

AT&T

AT&T 1818 Bedienungsanleitung

AT&T

AT&T 922 Bedienungsanleitung

AT&T

AT&T 950 Bedienungsanleitung

AT&T

AT&T SynJ SB67148 Bedienungsanleitung

AT&T

AT&T Trimline 230 Bedienungsanleitung

AT&T

AT&T 945 Bedienungsanleitung

AT&T

AT&T TRIMLINE 265 Bedienungsanleitung

AT&T

AT&T 636CA Bedienungsanleitung

AT&T

AT&T MERLIN LEGEND Release 2.0 Analog Multiline... Handbuch

AT&T

AT&T 945 Bedienungsanleitung

AT&T

AT&T TRIMLINE 213 Bedienungsanleitung

AT&T

AT&T CL84107 Bedienungsanleitung

AT&T

AT&T DLP72212 Bedienungsanleitung

AT&T

AT&T EL52315 Bedienungsanleitung

AT&T

AT&T E2912B Bedienungsanleitung

AT&T

AT&T 983 Bedienungsanleitung

AT&T

AT&T 993 Bedienungsanleitung

AT&T

AT&T Four-Line Intercom Speakerphone 944 Bedienungsanleitung

AT&T

AT&T 5870 Bedienungsanleitung

AT&T

AT&T TL90031 Bedienungsanleitung

AT&T

AT&T CL84109 Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung

Axess Telecom

Axess Telecom ACW-1xP800 Bedienungsanleitung