ATEN CE700A Bedienungsanleitung
CE700A
USER MANUAL
USB KVM Extender
FCC Information
This is an FCC Class A product. In a domestic environment this product
may cause radio interference in which case the user may be required to
take adequate measures.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
User Notice
This ATEN product is specifically designed and manufactured for the
operation and management of computer mainframe and communications
equipment used in network management centers. As such, it may not be
completely appropriate for those environments and sites where special
standards for performance and high reliability are required – such as
military equipment, traffic management, nuclear facilities, security
systems, communications equipment, medical facilities, etc.
RoHS
This product is RoHS compliant.
SJ/T 11364-2006
The following contains information that relates to China.
- 3 -
CE700A User Manual
Online Registration
Telephone Support
Technical Support
For international online technical support – including
troubleshooting, documentation, and software updates:
http://support.aten.com
For North American technical support:
International http://support.aten.com
North America http://www.aten-usa.com/product_registration
International 886-2-8692-6959
China 86-10-5255-0110
Japan 81-3-5615-5811
Korea 82-2-467-6789
North America 1-888-999-ATEN ext 4988
United Kingdom 44-8448-158923
Online
Technical
Support
Troubleshooting
Documentation
Software Updates
http://www.aten-usa.com/support
Telephone Support 1-888-999-ATEN ext 4998
- 4 -
Package Contents
The CE700A USB KVM Extender package contains the following:
1 CE700AL USB KVM Extender (Local Unit)
1 CE700AR USB KVM Extender (Remote Unit)
1 USB KVM Cable (1.8 m)
2 Power Adapters
2 Rack Mount Kits
1 User Instructions*
Check to make sure that all the components are present and that
nothing got damaged in shipping. If you encounter a problem,
contact your dealer.
Read this manual thoroughly and follow the installation and
operation procedures carefully to prevent any damage to the unit,
and/or any of the devices connected to it.
*Features may have been added to the CE700A since this
manual was printed. Please visit our website to download the
most up-to-date version of the manual.
Copyright © 2009–2012 ATEN® International Co., Ltd.
Manual Part No. PAPE-1341-AT2G
Manual Date: 2012-02-06
ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights
reserved. All other trademarks are the property of their respective owners.
- 5 -
Overview
The CE700A is a USB KVM Extender with superior video quality
and built-in ESD and surge protection that allows access to a
computer system from a remote USB console (USB keyboard,
monitor, and USB mouse).
Because it allows access to a computer system from a remote
console, the CE700A is perfect for use in any type of installation
where you need to place the console where it is conveniently
accessible, but you want the system equipment to reside in a safe
location – away from the dust and dirt of the factory floor, or the
harsh environmental influence of a construction site, for example.
The CE700A is also useful for control and security purposes,
where you can have the system unit in a secure area at the same
time that you put the console in the most convenient location for
user access.
The CE700A improves on previous designs by: 1) incorporating
15KV ESD protection and 2KV surge protection; 2) providing
superior video quality – up to 1920 x 1200 resolution; 3) using
inexpensive Cat 5 cable, instead of bulkier, more expensive,
standard cables, for a much neater, more convenient, more
reliable data transfer connection; 4) it is able to sense the
distance to the system and automatically adjusts the gain
accordingly; and 5) it features a custom ASIC to ensure the
utmost in reliability and compatibility.
Setup is as easy as can be – simply connect the computer
system box and local console to the Local CE700A Module; run
the Cat 5 cable to the Remote CE700A Module (up to 150 meters
away); and plug the remote console into the Remote Module.
Note: You can control numerous remote systems from a single
console by combining the CE700A with a KVM switch.
- 6 -
Features
Local and Remote Units connect at distances up to 150 m
using Cat 5e cable
Dual console operation – control your system from both the
local and remote USB keyboard, monitor, and mouse
consoles
Built-in ASIC for greater reliability and compatibility
Auto Signal Compensation (ASC)
USB Keyboard and USB Mouse Ports
USB overcurrent detection and prevention
Pushbutton operating mode selection (Local Unit only) –
select between Local and Auto operating modes.
Built-in 8KV/15KV ESD protection (Contact voltage 8KV; Air
voltage 15KV) and 2KV surge protection
Automatic gain control – adjusts signal strength to
compensate for distance
High resolution video – up to 1920 x 1200@60Hz (30 m );
1600 x 1200@60Hz (100 m); 1280 x 1024@60Hz (150 m)
Supports VGA, SVGA, SXGA, UXGA, WUXGA, and
multisync monitors; local monitor supports DDC; DDC2;
DDC2B
Hot pluggable
Rack mountable
Easy to install – no software required – connecting cables to
the devices is all it takes
- 7 -
System Requirements
Consoles
A VGA, SVGA, SXGA, UXGA, WUXGA, or Multisync monitor
capable of the highest resolution that you will be using on the
installation
A USB keyboard
A USB mouse
Computers
The following equipment must be installed on each computer that
is to be connected to the system:
A VGA, SVGA, SXGA, UXGA, WUXGA, or Multisync card
USB Host Controller and Type A USB Port
Cables
For optimal signal integrity, and to simplify the layout, we
strongly recommend that you use the high quality custom
USB KVM Cable that is provided with this package.
Cat 5e cable is the minimum required to connect the local and
remote CE700A units. Cable of a lesser standard will result in
degrading the video signal. For best performance, we
strongly recommend Cat 5e cable.
Supported Operating Systems
OS Version
Windows 2000, XP, Vista
Linux RedHat 7.1 and higher
SuSE 9.0 and higher
Mandriva (Mandrake) 9.0 and higher
UNIX FreeBSD 4.2 and higher
Novell Netware 6.0 and higher
- 8 -
Components
CE700AL (Local Unit) Front View
CE700AR (Remote Unit) Front View
No. Component Description
1 KVM Port The custom USB KVM cable that links
the unit to the computer plugs in here.
2 Remote LED The CE700AL has two LEDs to
indicate operating status. See LED
Display, page 17, for details.
3 Local LED
4 Operating Mode
Selection Pushbutton
This pushbutton toggles the operating
mode between Auto and Local. See
Operating Modes, page 16, for details.
5 Link LED The CE700AR has two LEDs to
indicate operating status. See LED
Display, page 17, for details.
6 Remote LED
1234
AUTO / LOCAL
56
REMOTE
- 9 -
CE700AL / CE700AR Rear View
CE700AL / CE700AR Side View
No. Component Description
1 Console Ports The local and remote console’s USB
keyboard, USB mouse, and monitor
plug into these ports.
2 Power Jack The power adapter cable plugs into
this jack.
3 Remote I/O The Cat 5e cable that connects the
local and remote units plugs in here.
4 Grounding Terminal The grounding wire attaches here.
See Installation, page 11, for details.
1
23
4
- 10 -
Hardware Setup
Rack Mounting
For convenience and flexibility, the CE700AL and CE700AR can
be mounted on system racks.
1. Using the screws provided in the Rack Mount Kit, screw the
mounting bracket into the top or bottom of the unit as shown:
2. Screw the bracket into any convenient location on the rack.
Make sure that the power to any device that you
connect to the installation has been turned off. You
must unplug the power cords of any computers that
have the Keyboard Power On function.
Phillips hex head
M3 x 6
Andere Handbücher für CE700A
2
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere ATEN Extender Handbücher
ATEN
ATEN CE611 Bedienungsanleitung
ATEN
ATEN VE8900 Series Bedienungsanleitung
ATEN
ATEN VE600 Bedienungsanleitung
ATEN
ATEN CE624 Bedienungsanleitung
ATEN
ATEN KE6900 Bedienungsanleitung
ATEN
ATEN KX Series Bedienungsanleitung
ATEN
ATEN CE610L Bedienungsanleitung
ATEN
ATEN VE819 Bedienungsanleitung
ATEN
ATEN CE-220L Bedienungsanleitung
ATEN
ATEN CE100 Bedienungsanleitung
ATEN
ATEN VanCryst VE8900 Bedienungsanleitung
ATEN
ATEN KX Series Bedienungsanleitung
ATEN
ATEN ProXime CE750 Bedienungsanleitung
ATEN
ATEN CE600 Bedienungsanleitung
ATEN
ATEN VE802 Bedienungsanleitung
ATEN
ATEN VanCryst CE820 Bedienungsanleitung
ATEN
ATEN IC164T Bedienungsanleitung
ATEN
ATEN VEO66 Bedienungsanleitung
ATEN
ATEN UCE3250 Bedienungsanleitung
ATEN
ATEN VE8900 Series Bedienungsanleitung
