Atlantic Technology STA-200 Bedienungsanleitung
343 Vanderbilt Avenue Norwood, MA 02062
Telephone: (781) 762-6300 Fax: (781) 762-6868
STA-200 STREAMING AMPLIFIER USER GUIDE
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other .
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power- supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. Grounding or Polarization–This product may be equipped with a
polarized alternating-current line plug (a plug having one blade wider than
the other). This plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your electrician
to replace your obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
Alternate Warnings–This product is equipped with a three-wire grounding-
type plug, a plug having a third (grounding) pin. This plug will only fit into
a grounding-type power outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.
16. Ventilation–Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and to protect it
from overheating, and these openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided
or the manufacturer’s instructions have been adhered to.
17. The MAINS plug or an appliance coupler is used as the disconnect
device, the disconnect device shall remain readily operable.
18. CLASS II apparatus with double insulation, and no protective earth
provided.
19. CAUTION: Danger of explosion if the remote control battery is
incorrectly replaced. Replace only with the same or equivalent type.
20. WARNING: The remote control battery (battery or batteries or battery
pack) shall not be exposed to excessive heat such as sunshine, fire or the
like.
21. No naked flame sources, such as lighted candles, should be placed on
the apparatus.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE
THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE
OR OTHER OUTLET UNLESS THE BLADES CAN BE
FULLY INSERTED TO PREVENT BLADE EXPOSURE
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
Important Safety Instructions
1/18
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interfer- ence
that may cause undesired operation.
FCC WARNING
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
inerference to radio communications.
However, there is no guarantee that interference will not occur in a particu- lar
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
•Connect the equipment into an outlet different from that to which the receiver
is connected.
•Consult the dealer or an experienced radio/TV technician for help. Caution:
To comply with the limits for an FCC Class B comput
ing device, always use any shielded signal cord supplied with this unit.
The Federal Communications Commission warns that changes or modifica-
tions of the unit not expressly approved by the party responsible for compli-
ance could void the user’s authority to operate the equipment.
Radio Frequency Interference Statement
Warning:
This is a Class B product. In a domestic environment, this product may cause
radio interference in which case the user may be required to take adequate
measures.
European Union Information on Disposal for Users of Waste
Electrical & Electronic Equipment (private households)
This symbol on the product(s) and / or accompanying documents means
that used electrical and electronic products should not be mixed with
general household waste. For proper treatment, recovery and recycling,
please take this product(s) to designated collection points where it will be
accepted free of charge.
Alternatively, in some countries you may be able to return your products
to your local retailer upon purchase of an equivalent new product.
Disposing of this product correctly will help save valuable resources and
prevent any potential negative effects on human health and the environ-
ment, which could otherwise arise from inappropriate waste handling.
Please contact your local authority for further details of your nearest
desig- nated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accor-
dance with you national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact
your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union. If you wish to discard
this product please contact your local authorities or dealer and ask for the
cor- rect method of disposal.
Important Safety Instructions
Qualcomm aptX is a product of Qualcomm Technologies International,
Ltd. Qualcomm is a trademark of Qualcomm Incorporated, registered in
the United States and other countries, used with permission. aptX is a
trademark of Qualcomm Technologies International, Ltd., registered in
the United States and other countries, used with permission.
2/18
Introduction
2
Initial Setup
6
Connecting a Bluetooth Source
8
Using your STA-200 as a SKAA receiver
10
Using the Line in Analog Audio Input
12
Using the AUX Input
12
Using Several STA-200 Units Together in a SKAA Network
13
15
16
3/18
The SKAA cmd App
The SKAA cmd App Specifications
Trouble Shooting Guide 17
Introduction
IR Audio Input
4/18
Power LED
Bright Orange: On
Dim Orange: Sleep
Gear Button
Click to switch modes
Hold to power on/off
Bluetooth LED
See Page 6 for
description
Bluetooth Button
See Page 6 for
description
Relay LED
See Page 10-11 for
description
SKAA Indicator
LED See Page 8 for
description
Volume
Down Button
Volume
Up Button AUX Input
Jack See Page 9
for description
Infrared
Receiver
Sensor for
IR remote
SKAA Bond Button
See Page 8 for
description
AUX LED
See Page 9 for
description
Introduction
5/18
Remote control
1. POWER ON/OFF Button
2. MUTE Button
3. Volume Up Button
4. Volume Down Button
5. Gear Button
6. SKAA Bond Button
7. Bluetooth Button
Speaker Output
L
L
R
R
Line in Line out
R
L
+
_
Power
On
Off
100-240~50/60Hz
200 Watts Max Power
Speaker Output
L
L
R
R
Line in Line out
R
L
+
_
Power
On
Off
100-240~50/60Hz
200 Watts Max Power
Initial Setup
The STA-200 supports both active and passive speakers.
If you are connecting active speakers (i.e. if your speakers use
power cables), connect them to the output labeled "Line out".
If you are connecting passive speakers (i.e. if your speakers are
powered solely by the connection to your STA-200), connect them to the
output labeled "Speaker Output".
6/18
Initial Setup
7/18
Before attempting to use any buttons on the front plate, ensure that the power
switch on the back of your STA-200 is flipped to the "On" position. Next, hold
the Gear button for two seconds to power on the unit. Once the power LED is
illuminated, click the Gear button to cycle through the modes.
Works as an ordinary BT
speaker. Use the Bluetooth
button to pair with your phone.
It’s a fully-functional SKAA receiver.
Feed it audio with any SKAA
hardware transmitter or any other
STA-200 in Relay mode.
Plug in any 3.5 mm stereo audio source into
the AUX jack on the front or any RCA line level
source into the Line In input on the back.
Same as AUX, but this mode
rebroadcasts the AUX audio to
up to 4 more speakers via SKAA!
Same as BT, but this mode
rebroadcasts the BT audio to up
to 4 more speakers via SKAA!
Connecting a Bluetooth Source
Cycle to Bluetooth mode by clicking the Gear button. When in Bluetooth
mode, the Bluetooth LED will be illuminated.
IR
Audio Input
Enter pairing mode on the Bluetooth device you want to connect to the
STA-200 and select the STA-200 from the discoverable devices list.
This diagram represents the Bluetooth behavior of the STA-200
8/18
Connecting a Bluetooth Source
Initialization
Clicking the Gear button while in any other mode enters the BT Mode or BT
Relay Mode and begins Initialization. Powering on the STA-200 in either BT
Mode or BT Relay Mode also starts Initialization.
Pairing List
The Paired List contains up to eight of the most recent hosts which have
successfully paired and connected with the STA-200.
Button
Clicking the button toggles between the Attempt Connection state and the
Pairing state. From the Connected state, a two-second press and hold of
the button will force the STA-200 to drop the connection to its currently
connected device and enter the Pairing state. A ten-second press & hold of
the button will clear the Paired List and enter the Pairing state.
Timeouts
From Initialization, the STA-200 attempts to connect to the most recently
connected host for ten seconds. After ten seconds, if a successful
connection has not been established, the STA-200 will enter the Pairing
state.
If the connected host goes out of range, the STA-200 attempts to reconnect
to that host for 60 seconds. After 60 seconds, if a successful connection has
not been established, the STA-200 will enter the Pairing state.
9/18
Inhaltsverzeichnis
Andere Atlantic Technology Verstärker Handbücher
Atlantic Technology
Atlantic Technology SA-350 Bedienungsanleitung
Atlantic Technology
Atlantic Technology SA-380 Bedienungsanleitung
Atlantic Technology
Atlantic Technology P-2000 Bedienungsanleitung
Atlantic Technology
Atlantic Technology SP-8000 Bedienungsanleitung
Atlantic Technology
Atlantic Technology A-2000 Bedienungsanleitung
