Atlantis Land A02-AP1-W54 Bedienungsanleitung

Where solutions begin

Wireless Multi-Function

Access Point

A02-AP1-W54

MANUAL

A02-AP1-W54 _ME01

Where solutions begin

Wireless Multi-Function Access Point

INDEX

CHAPTER 1: INTRODUCTION 1

1.1 An Overview of the del Wireless Multi-Function Access Point 1

1.2 Package Contents 2

1.3 Wireless Multi-Function Access Point Features 2

1.4 System Requirements 3

1.5 Setup 3

1.6 Location 4

CHAPTER 2: USING WIRELESS ACCESS POINT 5

2.1 Cautions for using the Wireless Access Point 5

2.2 The Front LEDs 6

2.3 The Rear Ports 6

2.4 Cabling 7

CHAPTER 3: CONFIGURATION 8

3.1 Before Configuration 8

3.1.1 Windows 95/98/ME 9

3.1.2 Windows NT4.0 10

3.1.3 Windows 2000 11

3.1.4 Windows XP 12

3.2 Default Settings 13

3.2.1 Password 13

3.2.2 LAN WLAN 13

3.3 Accessing the Access Point Web Configurator 13

3.3.1 Navigating the Access Point Web Configurator 14

3.4 Wizard 15

3.5 Status 17

3.6 Basic Setting 18

3.6.1 Access Point Mode 19

3.6.2 AP Client Mode 21

3.6.3 WDS Mode 23

3.6.4 AP+WDS mode 29

3.6.5 Repeat Mode 31

3.7 IP Setting 33

Wireless Multi-Function Access Point

3.8 Advanced Setting 34

3.9 Security 35

3.10 Tools 36

APPENDIX A: TROUBLESHOOTING 38

A.1 Using LEDs to Diagnose Problems 38

A.1.1 LED Power 38

A.1.2 LED LAN 38

A.1.3 LED WLAN 39

A.2 WEB 39

A.3 Login 39

A.4 FAQ 41

APPENDIX B: TECHNICAL FEATURES 45

APPENDIX C: SUPPORT 46

A02-AP1-W54_ME01 (V1.0 May2006)

Wireless Multi-Function Access Point

No part of this publication may be reproduced, stored in a retrieval system, or

transmitted in any form or by any means, whether electronic, mechanical,

photocopying, recording or otherwise without the prior writing of the publisher.

Windows™ 98SE/2000/ME/XP are trademarks of Microsoft® Corp. Pentium is

trademark of Intel. All copyright reserved.

The Atlantis Land logo is a registered trademark of Atlantis Land SpA. All other

names mentioned mat be trademarks or registered trademarks of their respective

owners. Subject to change without notice. No liability for technical errors and/or

omissions.

Wireless LAN, Health and Authorization for use

Radio frequency electromagnetic energy is emitted from Wireless LAN devices.

The energy levels of these emissions however are far much less than the

electromagnetic energy emissions from wireless devices like for example mobile

phones. Wireless LAN devices are safe for use frequency safety standards and

recommendations. The use of Wireless LAN devices may be restricted in some

situations or environments for example:

·On board of airplanes, or

·In an explosive environment, or

·In case the interference risk to other devices or services is perceived or identified

as harmful

In case the policy regarding the use of Wireless LAN devices in specific

organizations or environments (e.g. airports, hospitals, chemical/oil/gas industrial

plants, private buildings etc.) is not clear, please ask for authorization to use

these devices prior to operating the equipment.

Regulatory Information/disclaimers

Installation and use of this Wireless LAN device must be in strict accordance with

the instructions included in the user documentation provided with the product. Any

changes or modifications made to this device that are not expressly approved by

the manufacturer may void the user’s authority to operate the equipment. The

Manufacturer is not responsible for any radio or television interference caused by

unauthorized modification of this device, of the substitution or attachment.

Manufacturer and its authorized resellers or distributors will assume no liability for

any damage or violation of government regulations arising from failing to comply

with these guidelines.

Wireless Multi-Function Access Point

CE Mark Warning

This is a Class B product. In a domestic environment, this product may cause

radio interference, in which case the user may be required to take adequate

measures.

CE in which Countries where the product may be used freely:

Germany, UK, Italy, Spain, Belgium, Netherlands, Portugal, Greece, Ireland,

Denmark, Luxembourg, Austria, Finland, Sweden, Norway and Iceland.

France: except the channel 10 through 13, law prohibits the use of other

channels.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation.

This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which

the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, (example - use only shielded

interface cables when connecting to computer or peripheral devices) any changes

or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1) This device may not cause harmful interference, and

Wireless Multi-Function Access Point

2) This device must accept any interference received, including interference that

may cause undesired operation.

Wireless Multi-Function Access Point

A02-AP1-W54 Pag. 1

CHAPTER 1: Introduction

Congratulations on your purchase of this IEEE 802.11g Wireless LAN Access

Point. This manual helps to features the innovating wireless technology that can

help you build a wireless network easily! This manual contains detailed

instructions in operation of this product. Please keep this manual for future

reference.

With a WLAN (IEEE 802.11g) Access Point, a mobile computer can share data

with another mobile computer in a wireless way. Easy-to-use utilities are bundled

with WLAN Access Point for configuration and monitoring purposes.

WLAN networking can wirelessly transmit and receive data, minimizing the need

for wired connections, at a speed of up to Fifty-four megabit per second. With

WLAN networking, you can locate your PC wherever you want without wires and

cables.

WLAN networking provides users with an access to real-time information

anywhere in their organization. The mobility provides productivity and service,

which are not available under wired networks.

1.1 An Overview of the del Wireless Multi-Function

Access Point

The device for a total freedom of movement without losing the connection. Easy

to be installed and fast and flexible, with Wireless Multi-Function Access Point

there is no more obligation for a fixed working place: you can easily work or

navigate for fun from your own garden or in different rooms of your office, always

in wireless connection.

The Roaming function gives you a complete freedom of movement and two or

more Wireless Multi-Function Access Point can serve wireless also large

headquarters.

A pair of Wireless Multi-Function APs operating under Bridge mode to act as the

bridge that connect two Ethernet networks or Ethernet enabled clients together.

Repeat Mode is able to extend the effective range and coverage of the wireless

network. Last but not least the AP will be a wireless Ethernet adapter transforms

any Ethernet-enabled devices to have the wireless function.

Thanks to advanced security functions which are integrated and thanks to the

troughput of the protocol IEE802.11G you are going to have a fast and flexible

wireless net, hacker safe.

The chipsets fully support Wi-Fi Protected Access (WPA/WPA2) and the

IEEE802.11i draft security standards in hardware and high-speed encryption

engines with no performance degradation.

Wireless Multi-Function Access Point

A02-AP1-W54 Pag. 2

1.2 Package Contents

Unpack the package and check all the items carefully. If any item contained is

damaged or missing, please contact your local dealer as soon as possible. Also,

keep the box and packing materials in case you need to ship the unit in the future.

The package should contain the following items:

Wireless Multi-Function Access Point

2 dBi Antenna

CDRom with online manual

Quick Start Guide (English, French, Italian)

AC/DC power adapter (7.5 V, 1A)

1.3 Wireless Multi-Function Access Point Features

Wireless Multi-Function Access Poin provides the following features:

•IEEE 802.11g and IEEE 802.11b: With built-in 802.11g access point for

extending the communication media to WLAN while providing the WEP

and WPA for securing your wireless networks.

•Wi-Fi Protected Access (WPA) and WEP encryption: Thanks to

advanced security functions which are integrated and thanks to the

troughput of the protocol IEE802.11G you are going to have a fast and

flexible wireless net, hacker safe. The chipsets fully support Wi-Fi

Protected Access (WPA) and the IEEE 802.11i draft security standards in

hardware and high-speed encryption engines with no performance

degradation.

•WDS: A pair of Wireless Multi-Function APs operating under Bridge mode

to act as the bridge that connect two Ethernet networks or Ethernet

enabled clients together. Repeat Mode is able to extend the effective

range and coverage of the wireless network.

•1 Antenna: 1 x 2 dBi Dipole detachable Antenna1 (SMA)

•1 port Fast Ethernet: A fast Ethernet 10/100Mbps port is supported in

the LAN site and automatic switching between MDI and MDI-X for

10Base-T and 100Base-TX ports is supported. An Ethernet straight or

cross-over cable can be used directly, this fast Ethernet switch will detect

it automatically.

•Mac Filtering (ACL): Access Control function allows clients whose MAC

addresses in the list will be able to connect to this Access Point.

•Web based GUI: supports web based GUI for configuration and

management. It is user-friendly with an on-line help, providing necessary

information and assist user timing. It also supports remote management

capability for remote users to configure and manage this product.

Wireless Multi-Function Access Point

A02-AP1-W54 Pag. 3

•Firmware Upgrade : the device can be upgraded to the latest firmware

through the WEB based GUI.

1.4 System Requirements

Before installing the device, your PC should meet the following:

Intel® Pentium®III 600Mhz or compatible processor with TCP/IP stack

Iinternet Explorer V6.0 on Netscape V6.0

CDRom

1.5 Setup

The setup of the Wireless Access Point can be performed using the following

steps:

•Visually inspect the Ethernet RJ45 port connector and make sure that it is

fully plugged in to the system’s Ethernet switch/hub port.

•Fix the direction of the antennas. Try to place the AP in a position that

can best cover your wireless network. Normally, the higher you place the

antenna, the better the performance will be. The antenna’s position

enhances the receiving sensitivity.

•Visually inspect if the Power Adapter was fully plugged to the device

power jack.

Andere Handbücher für A02-AP1-W54

Inhaltsverzeichnis

Andere Atlantis Land Drahtloser Zugangspunkt Handbücher

Atlantis Land

Atlantis Land A02-AP2-W54M Bedienungsanleitung

Atlantis Land

Atlantis Land I-Fly i I-Fly Wireless Access Point Bedienungsanleitung

Atlantis Land

Atlantis Land A02-AP2-W54M Bedienungsanleitung

Atlantis Land

Atlantis Land I-Fly A02-WAP-54G Bedienungsanleitung

Atlantis Land

Atlantis Land A02-AP-W54 Bedienungsanleitung

Atlantis Land

Atlantis Land NetFly AP1-54/P Bedienungsanleitung

Atlantis Land

Atlantis Land NetFly AP1-54 Bedienungsanleitung

Atlantis Land

Atlantis Land NetFly WAP 108 A02-WAP-54G(V1.1)_GX01 Bedienungsanleitung

Atlantis Land

Atlantis Land FlyBoost CL100 Bedienungsanleitung

Atlantis Land

Atlantis Land NetFly AP1-54/P Bedienungsanleitung

Atlantis Land

Atlantis Land A02-AP1-W54 Bedienungsanleitung

Atlantis Land

Atlantis Land I-Fly A02-WAP-54G/G2 Bedienungsanleitung

Atlantis Land

Atlantis Land A07-WA6102X-2 Bedienungsanleitung

Atlantis Land

Atlantis Land NETFLY AP2-54M Bedienungsanleitung

Atlantis Land

Atlantis Land A02-AP-W54 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung