Atlona AT-HD-SC-500 Bedienungsanleitung

Dual HDMI and VGA Switcher

w/Scaler and Display Control

AT-HD-SC-500

Please check http://www.atlona.

com/product/AT-HD-SC-500

for the most recent firmware

update or manual.

User Manual

atlona.com Toll free: 1-877-536-3976

Local: 1-408-962-0515

1. Introduction .................................................................................. 3

2. Requirements .................................................................................. 3

3. Features .................................................................................. 3

4. Panel Descriptions

a. Front Panel .................................................................................. 4

b. Back Panel .................................................................................. 4

5. Analog Audio .................................................................................. 5

6. WebGUI .................................................................................. 6-15

7. RS-232 .................................................................................. 16-20

8. OSD .................................................................................. 21-23

9. Connection and Installation .................................................................................. 23

10. Specifications .................................................................................. 24

11. Safety Information .................................................................................. 25

12. Warranty .................................................................................. 26-27

13. Atlona Product Registration .................................................................................. 27

Revision B -

Firmware Version 1.1.0 Added HDMI audio control

- Select the audio source to be embedded on the HDMI port

Revision C -

Firmware Version 1.2.0 Added Display Control

Revision E -

Firmware Version 1.3.10 Added ability to switch between DHCP and static IP

Added analog audio input gain control

atlona.com Toll free: 1-877-536-3976

Local: 1-408-962-0515

Table of Contents

atlona.com Toll free: 1-877-536-3976

Local: 1-408-962-0515

Introduction

The dual HDMI and VGA switcher w/scaler provides a multisystem solution. Use the HD-SC-500

as: a standalone 3 in 1 out switcher for small systems, an analog to digital video converter for

systems with no VGA ports, and a scaler for systems with displays that require specific resolutions.

Supports scaling of video up to 1920x1200/1080p, VGA conversion and audio embedding and de-

embedding, the HD-SC-500 has a function in almost any system.

Package Contents

Features

• 1 x AT-HD-SC-500

• 3 x Captive screw female connector (5 pin: audio, 3 pin: RS-232, 2 pin: power)

• 1 x Wall/table mount ears

• 1 x 5V Captive Screw Power Supply (AT-PW5V3.6A-CAPT)

• 1 x User manual

• Scales incoming signals up to 1920x1200

• 3 input, 1 output switcher

• Auto-switching (activated through RS-232 or webGUI)

• HDMI inputs support DVI and DisplayPort signals (with adaptors)

• Audio input for embedding audio onto video signals

• Control of brightness, contrast, saturation, hue, and sharpness

• Volume control

• Adjust treble and bass of audio output to ensure the best speaker performance

• Balanced, analog audio output for de-embedding audio to amplifiers or audio systems

• Control via RS-232, TCP/IP, webGUI, and OSD

• Ability to switch HDCP reporting between compliant and non-compliant

• Firmware upgradable for easy field service through USB or webGUI

atlona.com Toll free: 1-877-536-3976

Local: 1-408-962-0515

Panel Description

1. INPUT button - Press to switch between HDMI 1, HDMI 2, and VGA inputs

2. DISPLAY button - Press and hold for 5 seconds to bring up the OSD or select items

3. VOLUME - Adjusts the output volume, also used to navigate the OSD menu

4. HDMI IN 1 - Connect HDMI source here (DVI or DisplayPort compatible with adaptor)

5. VGA IN - Connect analog (VGA or RGB) video source here

6. AUDIO IN - Connect audio source here to be embedded with the input video

7. Status LEDs -

PW LED: Illuminates when receiving power

VGA, HDMI 1 & 2 LED: Illuminates to indicate the currently selected source

1. RS-232 - Connect control system or PC here to control the HD-SC-500

2. Firmware - Connect to a PC with a USB cable for firmware updating

3. DC 5V - Connect included power supply here

4. LAN - TCP/IP (Ethernet) port, connect to router, computer, or control device

5. AUDIO OUT - Audio output to audio amplifiers (e.g. AT-PA100-G2) or audio systems

6. HDMI IN 2 - Connect HDMI source here (DVI or DisplayPort compatible with adaptors)

7. HDMI OUT - Connect to display or extender (e.g. AT-UHD-EX-100CE-KIT)

Back Panel

Front Panel

HDMI IN 1

HDMI IN 2

HDMI

AUDIO IN

VGA IN

VGA

LAN

DISPLAY ^

INPUT VOL

AT-HD-SC-500

HDMI OUT

RS-232

RXTX

++-- L

AUDIO OUTDC 5V

HDMI IN 1

HDMI IN 2

HDMI

AUDIO IN

VGA IN

VGA

LAN

DISPLAY ^

INPUT VOL

AT-HD-SC-500

HDMI OUT

RS-232

RXTX

++-- L

AUDIO OUTDC 5V

3 6

3 4 5 6 7

atlona.com Toll free: 1-877-536-3976

Local: 1-408-962-0515

Tip (+)

Analog Audio

A captive screw analog audio connector is provided to ensure a more reliable and secure

connection. The captive screw connector supports balanced and unbalanced audio output.

Balanced audio connections use two signal wires and a ground to minimize interference to audio

signals. Unbalanced audio connections use one signal wire and a ground and are used if other

system components don’t support balanced signals.

Important! With unbalanced connections a jumper is needed between ground and negative to reduce noise

Note: Pin outs may vary, please refer to the audio device’s manual to ensure a correct connection.

Important! When terminating cables, please ensure exposed adjacent wires do not touch. This may result in

a short that can damage connected devices.

XLR RCA

Sleeve ( Ground)

2 ( + )

3 ( - )

1 ( )

L / R

BALANCED UNBALANCED

L / R

+ +

++ --

A login screen will appear (this is the same log in for admin and general users). For the first log in (and future

admin changes) the username is “root” and password is “Atlona”.

Note: Only the admin password can be changed (see page 15). The username will always remain “root”.

Network Connections

For convenience, the HD-SC-500 comes with DHCP on. This enables the switcher to be connected

to a network without knowing available IP addresses. If your network is not compatible with

dynamic IP addresses or if you are using the switcher with a TCP/IP control system, DHCP may be

turned off and the IP address set using RS-232 commands or the webGUI.

WebGUI

Atlona has created an easy to use webGUI for initial setup and later changes to the configuration of

the HD-SC-500.

To begin, plug a LAN cable into the LAN port of the HD-SC-500 and the network switch, then type

the IP address of the unit into a web browser of a PC connected to the same network (as seen below).

To find the switcher IP: Select “Information” within the OSD menu or use RS-232 command

“IPCFG”.

Important: If any stability issues are experienced, disable any anti-virus or firewall that may interfere with

network communication to the switcher. Once set up is done and the switcher webGUI is no

longer being used, the firewall and anti-virus can be re-enabled.

The Info screen displays general system information.

atlona.com Toll free: 1-877-536-3976

Local: 1-408-962-0515

The Video Page enables the input and output video settings to be adjusted to ensure quality and

compatibility.

Input

Input Selection - Choose between HDMI 1, HDMI 2, and VGA inputs

VGA Adjust - Centers the VGA video on the display

Auto-Switch -

ON/OFF switch: Toggle auto-switching on and off

Fallback Port: Select what input to switch to when the current signal is no longer received

Fallback Time(Sec): Set the amount of time (seconds) after receiving no signal before the

input is switched to the fallback port

atlona.com Toll free: 1-877-536-3976

Local: 1-408-962-0515

Full - The image will fill the display

16:9 - The image will fit to a 16:9 display

16:10 - The image will fit to a 16:10 display

4:3 - The image will fit to a 4:3 display

Keep Ratio - The image will keep the aspect ratio of the signal sent by the source

Note: Incorrect aspect ratio will display with horrizontal or vertical bars to fill the excess space

0800x600p60

11024x768p60

21280x800p60

31280x1024p60

41366x768p60

51400x1050p60

61600x900p60

71600x1200p60

81680x1050p60

91920x1200pRB

10 1280x720p25

11 1280x720p29

12 1280x720p30

13 1280x720p50

14 1280x720p59

15 1280x720p60

16 1920x1080i50

17 1920x1080i59

18 1920x1080i60

19 1920x1080p23

20 1920x1080p24

21 1920x1080p25

22 1920x1080p29

23 1920x1080p30

24 1920x1080p50

25 1920x1080p59

26 1920x1080p60

27 Native

Output Resolution -

Aspect Ratio -

Output

Output Resolution - Select the output resolution for the HDMI output (see resolution list below)

Color Space - Switch between RGB and YUV

Aspect - Adjusts the height and width of the image to fit the display (see aspect list below)

Overscan

Enable - Toggle on/off to enable horizontal and vertical sizing

H Size - Adjusts the width of the video

V Size - Adjusts the height of the video

Mirror-V - Flips the video upside down and backwards

ASP Background - Changes the horizontal/vertical bars on the picture between black and grey

atlona.com Toll free: 1-877-536-3976

Local: 1-408-962-0515

The Audio Page enables adjustments of audio source, volume, bass, and treble, providing a simple

solution for audio control.

HDMI Audio (1 and 2) - Select the audio source for the individual HDMI inputs

Auto - Will detect if receiving DVI signals and take audio from analog audio input

Digital - Will use audio from the HDMI input port

Analog - Will use audio from the analog audio input port

Output Audio

Mute - Toggle the output audio of both the HDMI and analog audio output

HDMI Audio - Toggle the HDMI audio on and off

L/R Audio - Toggle the analog audio on and off

Output Volume - Master volume for both HDMI and analog audio out

Output - Adjust the output volume Options: -80 to 0

Output Bass - Adjust the bass of the output Options: -12 to 15

Output Treble - Adjust the treble of the output Options: -12 to 15

The Picture Page provides output adjustment for brightness, contrast, saturation, hue, and

sharpness.

Note: Calibrate the display before using these settings to adjust the picture

Reset Pictures - Resets the picture settings of the unit

atlona.com Toll free: 1-877-536-3976

Local: 1-408-962-0515

The EDID Page enables the preferred input timing to be selected and HDCP compliance reporting to

be set.

HDMI Prefer Timing: Select the best resolution to ensure compatibility with the input & output

VGA Prefer Timing: Select the best resolution to ensure compatibility with the input & output

HDMI 1 HDCP: Switch the HDCP reporting between compliant or non-compliant

HDMI 2 HDCP: Switch the HDCP reporting between compliant or non-compliant

The HD-SC-500 has two HDCP reporting modes: compliant and non-compliant.

Note: HD-SC-500 does not alter the signal in any way

Note: HD-SC-500 will not pass HDCP compliant content to a non-HDCP display

Compliant -

Reports to the source it is connected to an HDCP compliant device

Note: Will pass all HDCP compliant and non-compliant source signals to an HDCP compliant display

Non-Compliant -

Reports to the source it is connected to an HDCP non-compliant device

Note: Some Apple products (and other PCs) will encrypt non-HDCP content, stopping non-HDCP compliant

displays from receiving even personal files such as: PowerPoint, Excel, or Word files. Use this mode to

pass non-HDCP content (e.g. to codecs or video streaming devices)

Note: Blu-Ray content, Apple TV, and other HDCP compliant source signals will not pass when set to

non-compliant

0800x600 11024x768 21280x720 31280x800 41366x768

51680x1050 61920x1080 71920x1200

Preferred Timings -

atlona.com Toll free: 1-877-536-3976

Local: 1-408-962-0515

Andere Handbücher für AT-HD-SC-500

Inhaltsverzeichnis

Andere Atlona Schalten Handbücher

Atlona

Atlona AT-HDMI-V42 Bedienungsanleitung

Atlona

Atlona AT-LINE-EX Bedienungsanleitung

Atlona

Atlona AT-HD4-V41 Bedienungsanleitung

Atlona

Atlona AT-HD4-V41 Bedienungsanleitung

Atlona

Atlona AT-APC21A Bedienungsanleitung

Atlona

Atlona AT-HD4-V42 Bedienungsanleitung

Atlona

Atlona AT-HDVS-210H-TX-WP Bedienungsanleitung

Atlona

Atlona AT-SDI81 Bedienungsanleitung

Atlona

Atlona AT-HDVS-150-TX-WP Bedienungsanleitung

Atlona

Atlona AT-PROHD44M-S Bedienungsanleitung

Atlona

Atlona AT-UHD-SW-52ED Bedienungsanleitung

Atlona

Atlona AT-UHD-SW-510W Bedienungsanleitung

Atlona

Atlona AT-PROHD48M-SR Bedienungsanleitung

Atlona

Atlona AT-HDVS-210U-TX-WP Bedienungsanleitung

Atlona

Atlona AT-SDI51 Bedienungsanleitung

Atlona

Atlona AT-HD600 Bedienungsanleitung

Atlona

Atlona junox AT-JUNO-451 Bedienungsanleitung

Atlona

Atlona AT-UHD-SW-51 Bedienungsanleitung

Atlona

Atlona AT-UHD-SW-52ED Bedienungsanleitung

Atlona

Atlona AT-LINE-PRO4-GEN2 Bedienungsanleitung

Atlona

Atlona AT-HDR-H2H-44MA Bedienungsanleitung

Atlona

Atlona AT-HDVS-150-TX Bedienungsanleitung

Atlona

Atlona AT-CV41R Bedienungsanleitung

Atlona

Atlona AT-UHD-SW-510W-KIT Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung