AT88CK9000 Secure Personalization Kit for CryptoAuthentication [USER GUIDE]
Atmel-8821C-CryptoAuth-AT88CK9000-Secure-Personalization-Kit-UserGuide_122014
Features
Single Push-button Triggers Parallel Programming
Supports Programming of Up to (10) Devices at a Time for SOIC Package
Supports Programming of Up to (5) Devices at a Time for TSSOP, UDFN, SOT23-3, or CONTACT
Provides the Following Feedback:
–Serial Number
–Programming Count
–Programming Limitation Count
–Firmware Version
–Device and Protocol
–Verification Cycle
–Status Lights For Pass/Fail per Device
–Visual Feedback While Programming (Push Button Light is On)
Embedded Power Controller
Provides power to DUTs Only When Programming —Load/Unload Safe
Detects When Devices are Positioned Backwards and Cuts Power to Protect the Board
Standard Micro-USB Used for Power and Configuration
Contents
Atmel®AT88CK9000 Board
Universal Power Supply Adaptor
0.5m USB Cable
Introduction
The AT88CK9000 secure personalization kit has been developed to securely personalize the Atmel
CryptoAuthentication™ ATSHA204A device series. Depending on the ordering code, the kit can securely
personalize 8-lead SOIC, 8-lead TSSOP, 8-pad UDFN, 3-lead SOT23, and 3-lead RBH CONTACT
packages. The 8-lead SOIC kit has sockets which can accommodate two devices per socket making it
capable of personalizing up to 10 devices at a time. Safety and security has been added to ensure secure
high-reliability programming.
The AT88CK9000 kit interfaces to the Atmel Crypto Evaluation Studio (ACES) software suite to provide
communication to a PC via a USB interface. This allows trusted users to program the board outside of the
manufacturing environment. Once programmed, the board becomes a standalone board. As a
standalone board, it only requires power, after which, will allow the programming of the ATSHA204A
devices. In addition, this board has an internal counter to keep track of how many devices were
programmed, both in total, as well as by session.
