ATN TTWS Series Bedienungsanleitung

TTWS Series

THERMAL WEAPON SIGHTS

operator’s manual

OPERATOR’S MANUAL (TTWS Series) REVISION 4 – APRIL, 2014

Important Export Restrictions! Commodities, products,

technologies and services contained in this manual are

subject to one or more of the export control laws and

regulations of the U.S. Government and they fall under the

control jurisdiction of either the US Department of State or the

US BIS-Department of Commerce. It is unlawful and strictly

prohibited to export, or attempt to export or otherwise transfer

or sell any hardware or technical data or furnish any service to

any foreign person, whether abroad or in the United States, for

which a license or written approval of the U.S. Government is

required, without ﬁrst obtaining the required license or written

approval from the Department of the U.S. Government having

jurisdiction. Diversion contrary to U.S. law is prohibited.

www.atncorp.com/warranty

Manual (TTWS Series) Revision 4 – April, 2014

The information in this manual furnished for information use only, is subject to

change without notice, is not to be construed as a commitment by ATN Corp.

ATN Corp. assumes no responsibility or liability for any errors or inaccuracies

that may appear in this book.

THIS PRODUCT CONTAINS NATURAL RUBBER LATEX

WHICH MAY CAUSE ALLERGIC REACTIONS.

CAUTION:

SAFETY SUMMARY

STUDY CAREFULLY THIS MANUAL BEFORE TURNING ON

AND OPERATING THIS PRODUCT.

CAUTIONS

The TTWS Series Thermal Digital Riflescopes are precision

electro-optical instruments and requires careful handling. To pro-

vide safe use of the systems the following instructions should be

observed:

• Do not dismantle the device.

• Keep the device clean; protect it from moisture, sharp tem-

perature drops and shocks.

• Be careful not to touch the glass surfaces. If you put fin-

ger-prints on, or contaminate the glass surfaces, use only

clean and soft materials to clean it.

• Do not leave the device in on position during stops in opera-

tion.

• Remove the batteries from the device for the period of storage.

WARNING

Do not permanently attach the scope to dynamic-mount applica-

tions that continuously transmit vibration (such as on vehicles or

heavy machinery).

WARNING

Do not point the scope directly at any high-intensity objects that you

must not view with your eyes (such as the sun or a welding arc). If

you do, you will damage the scope.

WARNING

Operating TTWS Series outside of its specified operating tempera-

ture range or voltage range can cause permanent damage and will

void the warranty.

WARNING

Use the power button to turn the scope off before you remove power

(remove batteries or disconnect external power supply).

WARNING

TTWS Series operates over a wide operating temperature range

(-20°C to +60°C). Not all lithium batteries are specified over this

same temperature span. Check the manufacturer’s specifications

of your selected battery to verify the valid temperature range.

WARNING

Do not use any battery other than a CR-123A lithium battery. DO

NOT use any battery(ies) providing a (combined) voltage greater

than 12.0 volts.

WARNING

Do not install batteries of different types (lithium with lithium-ion

rechargeable). All batteries must be of the same type.

WARNING

Do not replace batteries in a possibly explosive environment, such

as a gas station (or any place where you must turn off your vehicle

engine). If you do, sparks can cause an explosion.

WARNING

Remove the batteries before you store the riflescopes for extended

periods (2 weeks or more).

WARNING

Do not carry batteries in pockets containing metal objects such as

coins, keys, etc. Metal objects can cause the batteries to short cir-

cuit and become very hot. In the case of lithium batteries, a short

circuit could cause them to explode.

WARNING

Observe battery manufacturer’s guidelines for safe handling and

proper disposal of batteries.

EQUIPMENT LIMITATIONS

• The TTWS Series detector spectral band (7 to 14 mkm) pro-

vides a better penetration through smoke, smog, dust, water

vapor etc.

• Infrared radiation does not travel through glass and therefore

the scope does not sense objects if they are behind a glass

window.

TABLE OF CONTENTS

CHAPTER 1. INTRODUCTION . . . . . . . . . . . . . . . . . 1-1

1.1. General Information . . . . . . . . . . . . . . . . . . . . 1-2

1.1.1. Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

1.1.2. Reports . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

1.1.3. Storage . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

1.1.4. Warranty Information . . . . . . . . . . . . . . . . . . . 1-2

1.2. Description and Data . . . . . . . . . . . . . . . . . . . 1-5

1.2.1. Description . . . . . . . . . . . . . . . . . . . . . . . . 1-5

1.2.2. TTWS Standard Components. . . . . . . . . . . . . . . 1-7

1.2.3. Speciﬁcations . . . . . . . . . . . . . . . . . . . . . . . 1-8

1.2.4. Mechanical Function . . . . . . . . . . . . . . . . . . 1-11

1.2.5. Optical Function. . . . . . . . . . . . . . . . . . . . . 1-11

1.2.6. Electrical Function . . . . . . . . . . . . . . . . . . . 1-12

CHAPTER 2. ASSEMBLY AND PREPARATION . . . . . . . . 2-1

2.1. Preparation. . . . . . . . . . . . . . . . . . . . . . . . . 2-2

2.1.1. Preparation for Use . . . . . . . . . . . . . . . . . . . . 2-2

2.1.2. Examination for Operation . . . . . . . . . . . . . . . . 2-3

2.2. Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

2.2.1. Remove/installation of Quick Release Mount (QRM) . . . 2-4

2.2.2. Video Output . . . . . . . . . . . . . . . . . . . . . . . 2-5

CHAPTER 3. OPERATION . . . . . . . . . . . . . . . . . . . 3-1

3.1. General Information . . . . . . . . . . . . . . . . . . . . 3-2

3.1.1. General . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

3.1.2. Controls and Indication . . . . . . . . . . . . . . . . . . 3-2

3.2. Operating procedure . . . . . . . . . . . . . . . . . . . 3-3

3.2.1. Turning On . . . . . . . . . . . . . . . . . . . . . . . . 3-3

3.2.2. Focusing . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

3.2.3. ISM – Interactive Symbology Menu . . . . . . . . . . . . 3-5

3.2.4. Polarity . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

3.2.5. Brightness. . . . . . . . . . . . . . . . . . . . . . . . . 3-7

3.2.6. Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

3.2.7. Color Modes . . . . . . . . . . . . . . . . . . . . . . . 3-8

3.2.8. Manual Image Refresh / Calibration . . . . . . . . . . . 3-9

3.2.9. Reticle Color . . . . . . . . . . . . . . . . . . . . . . 3-10

3.2.10. Reticle Pattern . . . . . . . . . . . . . . . . . . . . . 3-10

3.2.11. New Firmware Change Guide . . . . . . . . . . . . . 3-11

3.2.12. Shut Down Operations. . . . . . . . . . . . . . . . . 3-11

CHAPTER 4. MAINTENANCE INSTRUCTIONS . . . . . . . . 4-1

4.1. Preventive Maintenance Checks and Services (PMCS) . 4-2

4.1.1. Purpose of PMCS. . . . . . . . . . . . . . . . . . . . . 4-2

4.1.2. Frequency of Performing PMCS . . . . . . . . . . . . . 4-2

4.2. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . 4-4

4.2.1. General . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

4.2.2. Troubleshooting Procedures . . . . . . . . . . . . . . . 4-4

4.3. Maintenance Procedures . . . . . . . . . . . . . . . . . 4-5

4.3.1. Scope Maintenance. . . . . . . . . . . . . . . . . . . . 4-5

4.3.2. Cleaning Procedures . . . . . . . . . . . . . . . . . . . 4-5

4.3.3. Preparing for Extended Storage . . . . . . . . . . . . . 4-6

iii

HOW TO USE THIS MANUAL

• Usage

You must familiarize yourself with the entire manual before operat-

ing the equipment. Read and follow all warning notices.

• Manual Overview

The table of contents includes the paragraph number, paragraph

title, and page number. An index provides additional references to

the subject contents.

1-1

CHAPTER 1

INTRODUCTION

1-2

1.1. GENERAL INFORMATION

1.1.1. SCOPE

This manual contains instructions for use in operating and main-

taining the TTWS Series Thermal Digital Riflescopes. Throughout

this manual, the TTWS Series will be referred to as the scope or

TTWS.

1.1.2. REPORTS

Reports from the user on recommendations for improvements are

encouraged. Send reports to the address below.

American Technologies Network Corp.

1341 San Mateo Avenue

South San Francisco, CA 94080

(800) 910-2862

(650) 989-5100

(650) 875-0129 fax

info@atncorp.com

www.atncorp.com

1.1.3. STORAGE

Storage of TTWS should be done in the factory packing and after a

thorough PMCS as outlined in Section 4.1 of this manual. This will

ensure the scope remains in mission ready condition during stor-

age. Batteries should be stored separately from the scope.

The scope should not be placed on the floor, in any area exposed to

high temperatures or direct sunlight. Presence of acid and alkaline

vapor, as well as of other aggressive admixtures in the air is unac-

ceptable.

1.1.4. WARRANTY INFORMATION

ONE YEAR PRODUCT WARRANTY

This product is guaranteed to be free from manufacturing defects in

material and workmanship under normal use for a period of 1 (one)

years from the date of purchase. In the event a defect that is covered

Inhaltsverzeichnis

Andere ATN Zielfernrohr Handbücher

ATN

ATN Night Arrow 2 Bedienungsanleitung

ATN

ATN nIGHT aRROW 6 Bedienungsanleitung

ATN

ATN Mars4x-3 Bedienungsanleitung

ATN

ATN ATN PS28 Bedienungsanleitung

ATN

ATN Aries MK 6600 Bedienungsanleitung

ATN

ATN Digital Ultra Sight Bedienungsanleitung

ATN

ATN Aries 390 Paladin Bedienungsanleitung

ATN

ATN Aries 6800C Defender Bedienungsanleitung

ATN

ATN 3.5X26 Bedienungsanleitung

ATN

ATN Aries Mk208 Bedienungsanleitung

ATN

ATN ThOR 3 B&W Bedienungsanleitung

ATN

ATN Daytime Series Bedienungsanleitung

ATN

ATN Ultra Sight DC Bedienungsanleitung

ATN

ATN Ultra Sight Digital Bedienungsanleitung

ATN

ATN Trident Pro2x-2 Bedienungsanleitung

ATN

ATN Professional 12-36x80 Bedienungsanleitung

ATN

ATN 10x65Z Bedienungsanleitung

ATN

ATN Daytime 5x33L Bedienungsanleitung

ATN

ATN Aries MK390 "Paladin" Bedienungsanleitung

ATN

ATN NVSG1 Bedienungsanleitung

ATN

ATN Trident Pro2x-2 Bedienungsanleitung

ATN

ATN Aries MK Bedienungsanleitung

ATN

ATN Mars 2 Bedienungsanleitung

ATN

ATN Mars4x-3P Bedienungsanleitung

Beliebte Zielfernrohr Handbücher anderer Marken

Leupold

Leupold Hunting Equipment Benutzerhandbuch

Newcon Optik

Newcon Optik DN482 Bedienungsanleitung

Bushnell

Bushnell ET3124F Bedienungsanleitung

Newcon Optik

Newcon Optik NVS-33 Bedienungsanleitung

Nikon

Nikon 8442 - Omega Muzzleloader Scope 1.65-5x36 Bedienungsanleitung

Pulsar

Pulsar Trail Series Bedienungsanleitung

FLIR

FLIR ThermoSight T50 Bedienungsanleitung

Pulsar

Pulsar Digisight Ultra N450 Bedienungsanleitung

Nikon

Nikon 1.65-5x36 Bedienungsanleitung

Nikon

Nikon OMEGA Muzzleloading 3-9x40 Bedienungsanleitung

Zeiss

Zeiss Classic Diatal T Series Bedienungsanleitung

Nikon

Nikon 4-16x50SF - Monarch Riflescope - BDC Bedienungsanleitung

COT

COT NM-108 BC Bedienungsanleitung

Nikon

Nikon 4-16x42SF - Monarch Riflescope Bedienungsanleitung

Minox

Minox ZP5 3-15x50 Bedienungsanleitung

Bushnell

Bushnell 20-4124 Bedienungsanleitung

StreamLight

StreamLight STINGER 700025 Bedienungsanleitung

Bushnell

Bushnell 71-3946 Bedienungsanleitung